| Manufacturer | ECOTOUCH |
|---|---|
| Item Weight | 6.74 pounds |
| Package Dimensions | 14.4 x 9.9 x 9.7 inches |
| Color | Black |
| Material | Aluminum, Brass, Acrylonitrile Butadiene Styrene |
| Shape | Rectangular |
| Power Source | 240V/60Hz hardwire |
| Voltage | 240 Volts |
| Wattage | 5.5 KW |
| Installation Method | Point-of-Use |
| Item Package Quantity | 1 |
| Flow Rate | 1.5 Gallons Per Minute |
| Type of Bulb | LED |
| Mounting Type | Wall |
| Usage | Indoor use only |
| Included Components | 2 gaskets, 4 anchors,4 screws,2 Mounting Brackets |
| Batteries Included? | No |
| Batteries Required? | No |
Tankless Water Heater Electric 240V, On Demand Hot Water Heater Digital Display 5.5kW,Electric Instant Hot Water Heater,Overheating Protection, Black
| Brand | ECOTOUCH |
| Color | Black |
| Power Source | 240V/60Hz hardwire |
| Material | Aluminum, Brass, Acrylonitrile Butadiene Styrene |
| Mounting Type | Wall |
About this item
- Make sure this fits by entering your model number.
- 【INSTANT & SUFFICIENT HOT WATER】Applied with 5.5KW heating system, the electric water heater supplies instant, consistent and endless hot water of 116℉or higher temp shortly, no waiting for preheat nor terrible temp up & down, perfect companion for sinks. Time to get rid of those "lukewarm" toys.
- 【SMART SELF ADJUSTMENT】The hot water heater adjusts power input based on flow rate and temp setting in real time. For example, less power will be applied by the system when waterflow reduced, thus you still get ideal temperature instead of scalding hot water, which means comfortable experience. Optimal energy efficiency of 98% saves considerable electric charge.
- 【CONVENIENT USE】The tankless water heater comes with digital display & touch control panel so temp setting is easy job. Now turn on the tap and let the smart unit do the rest, you needn’t go through hard lesson about temp setting by a mixer tap without any hint. This Black model does not comes with Remote control, useful for installation under sink.
- 【SAFE and DURABLE】Applied with multiple protection devices, every piece goes through strict tests to ensure 100% safe. Inner water and electricity lines are designed to run separately so as to avoid leakage or harm of scale build up. Approval by ETL and qualifies for UL, you can expect outstanding performance for years to come.
- 【POINT of USE】The sleek tankless water heater is compact as an oatmeal box, making it possible to install anywhere close to outlet and avoid energy waste. It can be mounted horizontally, vertically, obliquely, ideal for kitchen, bar, school, hospital, community and hair salon. Please verify it is the right size for you: 5.5kW@240V; dimensions 11" x 7.5" x 2.35"; pipes fittings :1/2" NPT.
Customers also search
Customers who viewed this item also viewed
Have a question?
Find answers in product info, Q&As, reviews
Your question might be answered by sellers, manufacturers, or customers who bought this product.
Please make sure that you are posting in the form of a question.
Please enter a question.
Product Description
Electric Tankless Water Heater For Sinks
Being one of those limited choices with smart modulation heating, ECOTOUCH tankless water heater provides instant & endless hot water with optimal thermal efficiency of 98% and minimum energy cost. Thus, the tankless water heater heats up 1.2GPM water from 67℉ to 109℉, which out runs most point use water heaters and will sure cut your electric bill.
Designed with compact size, it is one of perfect solutions for Kitchen & Bathroom Sinks, Wet Bars, Strip Malls, Doctor's Office.
MULTIPLE SAFETY PROTECTIONS
Over temperature protection
Dry heating protection
Leakage protection
Water and electricity line separated
KINDLY NOTE
1.The unit is mainly for sinks, not for shower purpose.
2.The tankless water heater should be installed professionally.
3.Please read instruction manual carefully prior to installation and use!
EASY INSTALLATION
Real compact design, water heater cooridates with scenes decor, above sink or under sink water heater, horizontally, vertically or obliquely installation. Comes with easy installation brackets, pipe fitting of 1/2" NPT and 10AWG power cord(fixed to the unit) so you don't to have to hire a plumber even if you can do it.
SPECIFICATIONS
- Power: 5.5kW
- Voltage: 240V~60Hz
- Min. water flow to activate the unit: 0.475GMP
- Max tempt rise from 67°F to 109°F @ 1.2GPM
- Max. Amperage: 23A
- Recommended wire size: 10AWG
- Required circuit breaker : 1x 2-Pole 30 AMP
Point-of-Use Under-sink Electric Tankless Water Heaters
|
|
|
|
|
|---|---|---|---|
Instant hot water and endlessAs soon as you turn it on, hot water comes out immediately with desired temperature and sufficient flow rate of 1-1.5 gallon per minute, no waiting for preheat or standby energy loss. The best part is you get endless hot water now, 24h service, anytime you need. Perfect for sinks. |
More hygieneNo storage in bulky water tank for long time heating, avoids bacterial growth and rusting issue that do great harm to water quality. Besides, water pipe and electricity heating are designed to run independently so as to avoid scale build up, now you get steady stream of clean and fresh hot water. |
Smart modulation and energy savingEquipped with a smart modulating control for stable temp, the hot water heater adjusts exact power input according to power calculation based on flow rate and temp setting in real time, which means you get still stable temp, instead of scalding hot, when you reduce flow rate. Optimal energy efficiency is promised. |
Sleek & compact design360 degree installation, lightweight design and compact as an oatmeal box, the tankless hot water heater is capable of and being located near by. It features a sleek and attractive design to blend seamlessly with decor. |
3 Smart Steps for Choosing Tankless Water Heaters
|
|
|
|
|---|---|---|
|
It is important to figure out your average inlet water temperature, this determines if you can get hot water of desired temp from the hot water heater. Outlet water temp equals inlet water temp plus temp raise(by the hot water heater). |
Check the chart to figure out the flow rate suggested for your area and the corresponding outlet water temp to see if it meets your need. For example, if inlet water in your area is 67℉, you are able to get 1.2GPM hot water @ 109℉, if you set temp lower, you are able to get more than 1.2GPM, correspondingly. |
Determining specs and electrical infrastructure is important because without the correct infrastructure your unit may not fit onto your breaker panel. We would like to remind you of reading the user manual prior installation and using for the first time. |
Compare with similar items
Product information
Color:BlackTechnical Details
Additional Information
| ASIN | B07QYRMCZ9 |
|---|---|
| Customer Reviews |
4.0 out of 5 stars |
| Best Sellers Rank |
#72,314 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement)
#84 in Water Heaters |
| Date First Available | April 22, 2019 |
Warranty & Support
Feedback
Important information
5 KW
240 volts
Customer reviews
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
By Edward on May 2, 2019
I contacted CS and the asked me to sent a video which I did. Their response was that the product was working properly but the amount of water was too much... because it was designed for a faucet.
This tiny shower doesn't use anymore water than a faucet... it just doesn't work.
returning it and not replacing it.
It was cheap. But it should at least work and do what it says. I’m returning it.
On the plus side, Amazon did refund my money and the seller did contact me. They were concerned about the bad review but that’s what reviews are for.
THIS IS NOT HOUSE SIZE, this is part of my research, and its fun, it's more for small place single-use, non-coincidental usage makes it viable.
It gets burn you hot in my upstairs shower, but its a very light water saver head I have and regulate the flow at the showerhead, a feminine type won't have that stick with the application guide and know your usage and need.
Being this little thing only draws 22 amps wide open, it will do the job this year and will be upgraded with the same manufacturer but with a 60amp so I can get stronger showers by more water flow, which will cost more to heat, so trade-off. For my current purposes and research, this unit is fantastic. I put some Niagra 3 flow water savers on lavatory and kitchen sink, on the low in bathroom vanity it will burn your hand upstairs, med flow is nice and warm. In the kitchen, low flow takes a while to heat and it's nowhere near the heat of upstairs as home downstairs has block crawlspace and no insulation on the copper pipes, but it gets hot if I let it run, just don't need it that hot to waste the water enough to heat the pipes to bring hotter water.
So I was originally going to put in a lowboy or some other small tanked heater--- then I started to look at the tankless units. For me it came down to what do we really need it for? Bathroom sinks and a sink for the kitchen--- honestly none are used with any amount of vigor, so I went with something that was not too big power consumption wise. This is supported by a 30A double pole breaker and 10ga wire. I have seen some post where people have used 12ga--- that is incorrect wire sizing and although it "works" it creates heat and can easily cause fires, etc. Save yourself or the life of others--- use the correct wire size.
So after getting it installed and what we did for our situation was to break in the line and plumb this inline with the gas hot water heater as an assist. PEX and Shark Bite fittings made short work of it all and tying into the existing copper. Leak tested, and let it purge out any air....turned on the breaker and set the temp to 110-degrees. So now it takes a mere 10-15 seconds depending on which sink you use. Water is plenty warm to wash your hands or clean silverware, cups, etc.
So overall I am duly impressed. I have really thought about it and in the future I will be buying one for home as I have a 240V/30A outlet for other purposes in my garage that I will use with one of these to wash cars--- warm water always works better and right now I only have cold water. I also have recommended it to a friend that has a pier and a wash station--- same situation in that they have hot and cold, but the the hot takes forever to get there....so they're going to be installing one this spring.





































