|Item model number||ESDCFII|
|Item Weight||0.8 ounces|
|Product Dimensions||4.5 x 4.3 x 0.6 inches|
|Item Dimensions L x W x H||4.53 x 4.33 x 0.59 inches|
Other Sellers on Amazon
ESDCFII: Extreme MMC, SDHC, SD to CF Type II Adapter
|Price:||$12.00 & FREE Shipping on orders over $49. Details|
Fulfillment by Amazon (FBA) is a service we offer sellers that lets them store their products in Amazon's fulfillment centers, and we directly pack, ship, and provide customer service for these products. Something we hope you'll especially enjoy: FBA items qualify for FREE Shipping and .
If you're a seller, Fulfillment by Amazon can help you increase your sales. We invite you to learn more about Fulfillment by Amazon .
- Enter your model number to make sure this fits.
- Converts SD memory cards into CF Type II card interface. Fits into CF type II Slot
- SD Card stores completely into the CF card adapter.
- Works w/ PDA, digital camera, printer etc. High-Speed CF interface w/ extreme performance
- SD 3.0 ready accept extFAT file system on Windows
- Support CF true IDE mode / memory mode/ IO mode
Frequently Bought Together
Customers Who Bought This Item Also Bought
Top Customer Reviews
My original adapter began failing. Err 02 would pop up every 5-10 shots or so. I bought a new one and everything is working well again. I would recommend buying two of these adapters and switching the eye-fi card back and forth as they begin to overheat. I believe the Err 02 comes from overheating and the eye-fi card shutting down. I don't know for a fact, but I think the eye-fi card has built in overheat protection and will shut itself off. I also recommend transferring the RAWs to your laptop with the eye-fi+cf-adapter through a cf reader or through your camera with a cord. I've corrupted whole cards full of RAWs by trying to connect the eye-fi card directly to the computer(mac) through the eye-fi card reader and also using a sandisk card reader. Luckily, I had the jpegs as backup. I've had no corruptions when transferring through the camera+cord to laptop or through the eye-fi+cf-adapter and cf card reader. Again, while transferring, the card will overheat and shut down. When this happens, I put the eye-fi card in to the 2nd cf-adapter and start where I left off. Sometimes I have to swap 3-4 times before I transfer all of the RAWs to lightroom. It's frustrating, but worth it.
I also DON'T recommend removing the metal plate from the card like most how-to's will tell you to do. Just keep the iPad close to your camera while they're transferring. I like to sling my camera over my shoulder and hold the iPad with the same hand while I'm walking to my next shot. Or if I can set them down, I'll put them right next to each other.Read more ›
Putting a SanDisk 16GB Extreme III 30MB/s Class 10 card, I can shoot video at 1920x1080 @ 25fps for as long as I want. Copying a big file on my computer to the card, I got ~78x. Shooting in continuous mode gives good speed for large fine JPEGs, but for raws w/o JPEGs the speed drops below usable rate once the buffer is full.
A small annoyance, which I guess is unavoidable with the SDHC & CF form factors, is that the SDHC card is inserted 90 degrees to the direction in which the adapter is inserted into the camera. That means replacing an SDHC card requires taking out the CF adapter first.
Do note this is CF Type II, so is 5mm thick. To be on the safe side, make sure your camera accepts CF Type II, and your card readers accepts either CF Type II or SD.
was able record HD video and take pictures.
I use the 7D to shoot surf photography in the water and wanted to set up a way to upload photos to Facebook while I am in the water. Why? WHY NOT!
In order to get the signal strength necessary to reach the wireless devices, I had to remove the metal shields on this CF Card Adapter. Images are now uploading quickly and consistently. I then setup my iphone (in a lifeproof case) to receive the images and then upload to my Facebook Photography page via Eye-Fi configuration. I haven't tested the configuration in the water yet, but testing to computer, iphone, and iPad were all good to go.
Bottom line: this SD to CF Adapter gets the job done and then some!
Everything works out of the box, camera has no issues recognizing the cards, formatting, doing everything you'd expect if it was a CF card. Video filming is just fine. Fast shooting is, of course, a bit slower than with CFs, but it's more of a limitation of SDHC than adapter.
Initially, my 5D Mark II (Canon firmware 2.1.2) gave a warning "Card not formatted". When attempting to format the card, I got an error: "Unable to format". This was with an 8GB Eye-Fi Pro that had already been set up with my local router.
IF you get this error, you'll need to update the firmware ON THE CF ADAPTER (not your camera's firmware, nor the Eye-Fi's firmware).
I'm guessing Amazon will butcher a link that I post, so just paste this text into google:
Once again, it's not related to the 7D's firmware, the fix is for all 3rd/4th generaiton adapter have met errCF issue with Eye-Fi X2.
Currently all the 3rd/4th generation adapter on the market are with old firmware, no new fix installed. If you get a 3rd/4th gen adapter and met errCF issue with Eye-Fi X2 on your DSLR, please update the firmware for the adapter.
There will be a link for the firmware update on dropbox. Make sure your CF adapter is empty (no SD card inside) when you try to do the update. Select the CF adapter from the dropdown menu and then click on the "update" button. Select the .bin file and you'll see two progress bars quickly fill up. Safely eject the CF adapter and you should be all set.
Afterwards, I ejected the CF adapter, stuck the Eye-Fi in, inserted into the 5D and formatted. After formatting, take a test picture and see if it uploaded to your computer/phone/tablet. If not, power down your camera, open the CF door, close it, and turn it back on. It worked perfectly for me at that point, and has worked fine since. Note that there is no feedback on the 5D Mark II screen as to the upload/connectivity status.Read more ›
Most Recent Customer Reviews
Upgraded my old Canon D60 to use SD cards. Adapter fit perfectly in the camera slot. Picture shown not the accurate representation as it is sqaurish CFII shaped and not elongated. Read morePublished 1 month ago by Grejam53
Got it for my 50D - It works, although I haven't pushed it - it does well enough shooting RAW photos at a moderate pace.Published 11 months ago by David Taylor
I used this with a Class 10 SD card in my 5Dmk2 and it worked perfectly, without problems, all the time! Read morePublished 12 months ago by CFin