|Item Weight||1 pounds|
|Product Dimensions||6 x 5 x 2 inches|
|Item model number||4485990|
|Item Package Quantity||1|
Eagle America Eagle America 448-5990 Center-It Drill Press V-Block
Frequently bought together
Customers who bought this item also bought
Drilling and cutting round stock can be very frustrating because it is not easy to hold or center. The Center-It Jig changes all of that. The sturdy aluminum V-shaped block is 5" long, 4" wide and 1-3/4" high which allows you to drill and cut almost any size dowel, pipe, or tube. The base has four slots so you can easily mount the jig to your drill press or workbench while the outside edges of the "V" are grooved to make controlling the jig very easy during hand held applications.
Top customer reviews
Update: 8 Nov 16
One was NOT enough. Decided on a second unit for travel with my engine driven welder. I tend to work with more pipe away from the shop that in it.
I welded a 1/4 inch piece of plate to the trailer with mounting holes for this. I don't want to leave it mounted all the time; to much chance of theft. I use a chain clamp (locking pliers with chain) to hold pipe in place for cutting or drilling. If you do the same, be sure to mount in a location that allows for lots of room for longer pipe.
Update: 30 Dec 16
Ordered a second one of these. Now I can use two at a time to brace a piece of pipe (or dowel) between them and drill a hole and have both ends supported.
Don't forget to order clamps to use on your drill press for these! Not using them for dowels is OK, but I've had problems hand holding pipe.