Consider these available items

  1. Alumilite Amazing Mold Putty 2/3 Lb
    Alumilite Amazing Mold Putty 2/3 Lb
    4.4159
    $24.95($2.36/Ounce)
    Added! Loading... Please try again.
  2. LET'S RESIN Silicone Putty,1LB/40A Silicone Mold Making Kit, Non-Toxic,Strong&Flexible, Easy 1:1 Mixing Ratio for Reusable Si
    LET'S RESIN Silicone Putty,1LB/40A Silicone Mold Making Kit, Non-Toxic,Strong&Flexible, Easy 1:1 Mixing Ratio for Reusable Silicone Molds, Resin Molds, Soap
    4.4413
    $24.95
    Added! Loading... Please try again.
  3. DIYcraft Silicone Putty,1LB/454G Silicone Mold Making Kit,Easy 1:1 Mixing Ratio Fast Cured Molding Putty for Casting,Non-Toxi
    DIYcraft Silicone Putty,1LB/454G Silicone Mold Making Kit,Easy 1:1 Mixing Ratio Fast Cured Molding Putty for Casting,Non-Toxic,Strong&Flexible,Reusable Silicone Molds,Resin Molds,Soap Molds(Purple)
    3.836
    $29.99
    Added! Loading... Please try again.
Currently unavailable.
We don't know when or if this item will be back in stock.
Added to

Sorry, there was a problem.

There was an error retrieving your Wish Lists. Please try again.

Sorry, there was a problem.

List unavailable.

Easy Mold Silicone Molding Putty for Casting and Jewelry Making, 1/2-Pound

4.3 4.3 out of 5 stars 302 ratings
Currently unavailable.
We don't know when or if this item will be back in stock.
Material Silicone
Color Clear
Brand Environmental Technology
Item dimensions L x W x H 6 x 3 x 6 inches
Shape Round

About this item

  • Quantity: 1/2-Pound
  • Fast Working Time
  • Silicone Putty
  • Package dimensions : 6.2 inches (H) x 6.2 inches (L) x 3.2 inches (W)
› See more product details

Product information

Feedback

Easy Mold Silicone Molding Putty for Casting and Jewelry Making, 1/2-Pound

Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.

Where did you see a lower price?
/
/
/
/
Please sign in to provide feedback.

Product Description

Ideal for a wide range of impression type mold applications Casting Resin and Epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals. For use in jewelry making including pendants, charms and earrings. 3 minute working time, 25 minute cure. Excellent detail from original. High heat range, up to 400 degrees Fahrenheit. No shrinkage. Self releasing, no mold release agent required for most applications. Complete Instructions and project ideas enclosed Measure equal amounts of silicone putty a & b until uniform color is achieved. Quantity: Net 1/2 pound (US), 0. 227 kg CAUTION: Do not eat. KEEP OUT OF REACH OF SMALL CHILDREN. Adult supervision recommended. Ingredients may cause eye irritation, skin redness and sensitization. If skin redness develops, discontinue use and wash affected area with soap and water. If material gets into eyes, wash eyes with plenty of water.

Looking for specific info?

Customer reviews

4.3 out of 5 stars
302 global ratings

Review this product

Share your thoughts with other customers
Write a customer review

Customers say

Customers find the craft mold easy to use and making great molds. They mention it works well, sets up quickly, and retains its shape nicely. The molds make a great impression and capture a great amount of detail. Many customers appreciate the flexibility and fun of using it. However, some feel the value for money is not good.

AI-generated from the text of customer reviews

Select to learn more
Works wellEase of useMold makingDetailBlend abilityFlexibilityFun to useValue for money
45 customers mention "Works well"45 positive0 negative

Customers like the product. It works well, especially for 3D molds. The molds they've made with it remain usable. They say it copies small details like numbers and there was no bubbling. It would work well for flat pieces, not 3D ones, though. Customers are happy with their purchase and shipping was quick.

"...sigh* So yeah - it works well...." Read more

"...D&D dice for chocolate molds, the small details (like numbers) came out very well and there was no bubbling on the chocolates...." Read more

"Great product...." Read more

"...I was hoping for a less stuff silicone, I suppose. It would work well for flat pieces, not 3d ones, though." Read more

42 customers mention "Ease of use"42 positive0 negative

Customers find the craft molds easy to use and quick to set up. They say it helps make their work as craftsmen easier and is a good place to start for newbies.

"...I will try that next, but the mold making is so easy - you just eyeball equal amounts and mix until uniform in color and them place it putty around..." Read more

"...The instructions were extremely clear and simple to understand, aside from having to work quickly and mix the two colors together, it was easy to..." Read more

"Easy to mix, easy to work with, however it starts to set up fairly quickly so if you're a newbie (like me) make sure you know how you're going to..." Read more

"...It's easy to use, mixes easily, and hardens up quick. I hate it because when it's dry it's not flexible enough...." Read more

17 customers mention "Mold making"17 positive0 negative

Customers find the product useful for making molds. They say it's great for silicone molds, especially 3D ones, and easy to mix with a moderate setting time. It's good for hard object molds, not soft ones, and sets up quickly. The molds are flexible and can be reused in the oven.

"This product was fantastic. Not only did it have plenty of molding putty to make what I needed to, but i also had plenty left over for future..." Read more

"...It makes fantastic molds. I have even used it to make molds of kitten toes and puppy toes for jewelry pieces...." Read more

"This is my favorite mold making putty. It captures a great amount of detail and sets very quickly...." Read more

"Great product to make your own molds. Quite a generous portion in this pack. Simple and clear directions...." Read more

12 customers mention "Detail"12 positive0 negative

Customers appreciate the craft mold's detail. It captures a great amount of detail and sets quickly. They say it makes a great impression, making clear, sharp lines. Some customers mention that the molds come out great with perfect imprints of very tiny details and copies all of the details of the item you are molding.

"...like to mention that, as I made D&D dice for chocolate molds, the small details (like numbers) came out very well and there was no bubbling on the..." Read more

"...once I got the hang of it my molds came out great with perfect imprints of very tiny details. Very happy with this, will be buying more." Read more

"...It does well with small grooves and copies all of the details of the item you are molding...." Read more

"...Notice the detail in the shell. It came out really nice. Excuse the bubbles. Must let the mold cure before using or you will get bubbles." Read more

7 customers mention "Blend ability"7 positive0 negative

Customers appreciate the craft mold's blendability. It mixes well and cures with great detail and the perfect firmness.

"Easy to mix, easy to work with, however it starts to set up fairly quickly so if you're a newbie (like me) make sure you know how you're going to..." Read more

"...It's easy to use, mixes easily, and hardens up quick. I hate it because when it's dry it's not flexible enough...." Read more

"...Super easy to blend together and cures with great detail and perfect amount of firmness/flexibility for my needs." Read more

"It blends easily together, basically working well. However, it requires some planning of adding clay to ensure a nice and smooth surface...." Read more

4 customers mention "Flexibility"4 positive0 negative

Customers appreciate the craft mold's flexibility. They say it sets quickly, retains its shape nicely, and cures with great detail.

"...I have never had a bubble work its way into it. Very flexible and use my molds frequently. I have yet to break one." Read more

"...Super easy to blend together and cures with great detail and perfect amount of firmness/flexibility for my needs." Read more

"...Sets quickly. Very flexible." Read more

"...I bought this to make some molds it sets up pretty quick and retains its shape nicely and very easy to work with." Read more

4 customers mention "Fun to use"4 positive0 negative

Customers find the craft molds easy to use and fun. They say they help make their work as craftsmen easier.

"This stuff has been so much fun to play with! I was using it to make mold for resin cabochons, and I was able to make two molds very quickly!..." Read more

"Fun to use and you don't have to use the whole thing at once. You can make several coin-sized​ molds from it...." Read more

"This was a lot easier to use than I expected and a lot of fun. Be sure to follow the instructions...." Read more

"Love this stuff. Helps my work as a professional crafter much easier." Read more

6 customers mention "Value for money"0 positive6 negative

Customers are unhappy with the value for money of the craft molds. They say the value has greatly diminished, 1lb used to be $20, and now 1/2lb is $20 and 1lb is $35. Some customers say the molds are a waste of money, making their cast unusable.

"Great product. A bit pricey, but convenient for those who are just getting into resin casting and don't yet want to invest on degassing chambers and..." Read more

"...Everything I made a cast of was completely unusable, seriously the worst I've ever worked with and I gave it four tries with two different..." Read more

"Absolutely horrible. Don't follow the instructions. Work as fast as you can. Don't mix 3 minutes ...." Read more

"Value has greatly diminished. 1lb used to be $20, now 1/2lb is $20 and 1lb is $35." Read more

Works well but very small amount
4 out of 5 stars
Works well but very small amount
This stuff works well in my opinion. It does well with small grooves and copies all of the details of the item you are molding.However, as many other stated...you do not get very much at all for your money. You can see in my photo that the containers are not even half full and the containers are small to begin with. It is an alright amount if you are learning to use it but it won't get you very far.
Hide
Thank you for your feedback
Sorry, there was an error
Sorry we couldn't load the review

Top reviews from the United States

  • ppodd
    5.0 out of 5 stars Really Awesome Product. I just wish there was twice as much in the package for the price -
    Reviewed in the United States on December 29, 2016
    Verified Purchase
    I only molded a very small thing because I didn't want to waste it. These are very, very small containers and it takes a lot of product to make even small molds. *sigh* So yeah - it works well. I just wish I had a ton of the stuff so I could practice a bit - as of now, I am not willing to just cast molds until my master is darn near perfect. You can bake clay in these after 48 hours, I think. I will try that next, but the mold making is so easy - you just eyeball equal amounts and mix until uniform in color and them place it putty around your master and wait a few minutes. You now have a mold that you can cast over and over again. Ideal if you do charms or sell charms and need to make many of one thing.
    2 people found this helpful
    Helpful
     Report
  • FP
    5.0 out of 5 stars Fantastic
    Reviewed in the United States on February 19, 2017
    Verified Purchase
    This product was fantastic. Not only did it have plenty of molding putty to make what I needed to, but i also had plenty left over for future use.
    The instructions were extremely clear and simple to understand, aside from having to work quickly and mix the two colors together, it was easy to use repeatedly.

    I'd also like to mention that, as I made D&D dice for chocolate molds, the small details (like numbers) came out very well and there was no bubbling on the chocolates. I also was able to make 2-piece molds due to how simple it was to use.
    Would (and probably will) definitely buy again in the future!
    3 people found this helpful
    Helpful
     Report
  • J. Judson
    4.0 out of 5 stars Short work time
    Reviewed in the United States on May 26, 2022
    Verified Purchase
    I keep just running out of time to get the putty mixed and smooshed arount the thing I want to make a mold of, and definitely don't have time to sculpt it into any sort of detailed shape like a handle cover or new tool. It doesn't stick to itself very well, either, so if I try to break the things I want to sculpt down into a base layer and a more refined shape layer on top, the result is not durable at all. It's fine if all you plan to use it for is flat mold of coins like they show on the box.
    Helpful
     Report
  • Amanda C
    5.0 out of 5 stars Great for beginners.
    Reviewed in the United States on July 6, 2015
    Verified Purchase
    Great product. A bit pricey, but convenient for those who are just getting into resin casting and don't yet want to invest on degassing chambers and other equipment.

    Takes a little bit of practice to get it right, you have to press in your blank and then don't mess with it or try to manipulate the mold around it, because it becomes stiff so quickly any additional kneading around the object can result in the putty actually pulling away from its surface unbeknownst to you.

    CAVEAT--this mold does take 24 hours to fully cure despite what the packaging implies

    As the enclosed literature states, the mold should be stiff enough to release within 25 minutes, but I would only recommend pouring your resin at this point if it is a FAST setting resin. The putty will continue to release gasses over the next 24 hours, so if you try to pour in something like EasyCast's epoxy resin you'll end up with something completely full of holes
    15 people found this helpful
    Helpful
     Report
  • SaraJFF
    5.0 out of 5 stars Works wonderfully
    Reviewed in the United States on October 5, 2014
    Verified Purchase
    Easy to mix, easy to work with, however it starts to set up fairly quickly so if you're a newbie (like me) make sure you know how you're going to mold your piece before you mix the compound. If I could go back I would practice with play dough or maybe silly putty, which would be closer to the consistency of this product. I only "wasted" a tiny bit, but once I got the hang of it my molds came out great with perfect imprints of very tiny details. Very happy with this, will be buying more.
    One person found this helpful
    Helpful
     Report
  • Cas
    3.0 out of 5 stars A little too stiff for me
    Reviewed in the United States on December 9, 2015
    Verified Purchase
    I love/hate this.

    I love it because there's a ton of it in this kit, and I can use it a little at a time. It's easy to use, mixes easily, and hardens up quick.

    I hate it because when it's dry it's not flexible enough. I wanted to use it with polymer clay, but I can't get my pieces out without damaging them. I was hoping for a less stuff silicone, I suppose. It would work well for flat pieces, not 3d ones, though.
    13 people found this helpful
    Helpful
     Report
  • R or C Driskill
    5.0 out of 5 stars Good product, a little expensive.
    Reviewed in the United States on March 2, 2015
    Verified Purchase
    Excellent product for what it is designed to do. The product (1/2 pound) equals about 1/2 the volume of a common soda can.

    My wife had broken a hand off a Limited Edition Lord of The Rings statue at home and then lost it. I was able to mold another perfect replica by using an identical statue. I then used resin to cast the new hand, glued it back on, and painted it.

    I would moderately 'wrap' the mold once it begins to set, giving you the tightest mold in relief.

    Don't forget if your mold has very narrow or very intricate features in it, use a vibrator (strong 'personal' vibrators that women use should work adequately) from the beginning of the pour to vibrate the resin in the mold slightly, getting all the tiny voids filled.

    Why they made it purple, I'll never know.
    42 people found this helpful
    Helpful
     Report
  • Jeff
    5.0 out of 5 stars Good for custom earplugs
    Reviewed in the United States on August 19, 2014
    Verified Purchase
    I used this silicone putty to make some custom earplugs/headphones. I mixed up a ball about the same diameter as a nickel. I pushed it into my ear, smoothing it into the helix. Then I took some Philips SHE3590 in-ear monitors (putting a bit of masking tape over the outlet so it didn't fill with silicone), pushed them into place, and left it there to cure for maybe twenty minutes or so.

    After that, I popped out the plugs, pushed/pulled the headphones out of the silicone, drilled a hole to allow the headphone sound to pass, pushed the headphones back in, and I had a good set of custom headphones.

    The resultant earplug is very similar in texture and rigidity to the Radians custom earplug kit, which runs about $20. I would estimate that I could make perhaps five or more pairs of earplugs from the 1/2 pound of Easy Mold. I also have a pair of professionally made custom earplugs, which I had done at a motorcycle show. I would say those are slightly more pliable and have a slightly smoother texture than either the Easy Mold or the Radians kit. However, I'd say the Easy Mold option is plenty good enough.
    4 people found this helpful
    Helpful
     Report

Top reviews from other countries

  • Amazon Customer
    5.0 out of 5 stars Product works great.
    Reviewed in Canada on March 12, 2021
    Verified Purchase
    I've used this product many times and it is very easy to use and fast drying. I always complain about the cost.
    Report