4pcs Original FVT LittleBee BLHeli_S SPRING ESC DSHOT 30A OPTO Electronic Speed Controller 2-6S Brushless for FPV Multicopter Quadcopter by Crazepony
Fulfillment by Amazon (FBA) is a service we offer sellers that lets them store their products in Amazon's fulfillment centers, and we directly pack, ship, and provide customer service for these products. Something we hope you'll especially enjoy: FBA items qualify for FREE Shipping and Amazon Prime.
If you're a seller, Fulfillment by Amazon can help you increase your sales. We invite you to learn more about Fulfillment by Amazon .
- Enter your model number to make sure this fits.
- BLHeli_S Firmware-----Support Blheli_S firmware,can use the signal wire to upgrade the firmware or change the configuration on line;Input Voltage: 2-6S Lipo,no BEC output;Size-35*17mm
- Support DSHOT 600/Oneshot125-----D_shot DSHOT 600 300and Oneshot125, Oneshot42, Multshot and DSHOT 600 300.When the esc is on power and it will automatically identify mode.Esc can straightly run DShot without do any update.
- 48MHz High Speed-----Switching speed is very fast, it has dedicated driver chip, MOS-Both low and high side fets are Nfets, Main IC-SILABS EFM8BB21F16 ,MCU run 48MHz
- Easy Upgrades-----You can flash the lastest firmware using the 3pin connector and suitable USB adapter and now can be used via the cleanflight GUI
- Support KISS And CC3D FC: the 30A BLHeli_S ESC have suitable size, which can work with KISS and CC3D FC, give you plenty of headroom on a standard 250 220 size quad!
Frequently bought together
What other items do customers buy after viewing this item?
Customers who viewed this item also viewed
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
FVT LittleBee BLHeli_S SPRING 30A ESC BLHeli_S have all the performance you would hope for and the same tiny size as the DYS BL30A.
You will struggle to find a frame small enough to fit these ESCs and they will still give you plenty of headroom on a standard 250 size quad!This ESC allows your motors to respond to throttle decreases much quicker, allowing for more stable flying, and higher response to throttle decreases.These ESCs do not have a BEC, you will need to supply 5v power to your flight controller with a UBEC or stepdown voltage regulator.
1.Dshot-Dshot is a different and faster communication protocol between the flight controller and the ESC on your quadcopter. It allows the FC to send control commands to the motor quicker, therefore in theory your multirotor should perform better.
2.Damped mode-This feature allows your motors to respond to throttle decreases much quicker, allowing for more stable flying, and higher response to throttle decreases.
3.Easy upgrades-With the BLHELI software rapidly evolving, you can flash the lastest firmware using the 3pin connector and suitable USB adapter and now can be used via the cleanflight GUI please note you will need to be running the Betaflight firmware to connect via the cleanflight interface but this is a simple way of adjusting and tweaking the settings of your escs.
Item name: FVT LittleBee BLHeli_S 30A ESC
Input Voltage: 2-6S Lipo
BEC Output: No
Continue Current: 30A, Burst Current: 35A up to 10S
Weight: 9g(include Power and signal wire)
Support Damped mode, Oneshot125, Oneshot42 ,Multshot and DSHOT
Main IC: SILABS EFM8BB21F16, MCU run 48MHz