Endless Summer, GAD860SP, LP Gas Outdoor Firebowl with Slate/Marble Mantel
- Enter your model number to make sure this fits.
- 40,000 BTUs will heat up to 150 sq. ft.
- Beautiful multi-colored slate and marble tile table
- Lava rocks and logs included
- Multi-spark electronic ignition for easy lighting and door with easy access to tank
- Variable settings to set the heat or set the mood.Simple Assembly – No Tools Needed
Frequently bought together
Customers who bought this item also bought
Customers who viewed this item also viewed
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
Compare to similar items
|Shipping||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping|
|Item Dimensions||41.26 x 41.26 x 21.7 in||31.5 x 31.5 x 24.21 in||47.6 x 55.1 x 22.4 in||29 x 38 x 38 in||31.9 x 33 x 9.7 in||38 x 38 x 24 in|
|Item Weight||162 lbs||81.57 lbs||133 lbs||105 lbs||61.7 lbs||112.5 lbs|
Bring the warmth and ambience of a fireplace to your patio, deck or backyard with this Endless Summer LP fire pit, by Blue Rhino. Featuring a slate mosaic tile mantel, this fire pit is complete with a decorative base, that cleverly conceals a propane tank (not included) and control panel, making it an attractive centerpiece for your outdoor living space. Complete with a 40,000 BTU cast iron burner, you can enjoy all the ambiance of a classic fire, without the mess of tending ashes. Adding to the elegance, this unit comes with lava rock and logs, which beautifully accents its flames. 1-year limited warranty and protective cover included.
Top customer reviews
There was a problem filtering reviews right now. Please try again later.
Once it is put together it is very sturdy and easy to use. The fire puts out a lot of heat and flame. The mantel is a nice size leaving plenty of room for drinks, plates, bottles, feet, etc. The lava rocks and fake logs looked a lot better than I thought they would. Overall it is a beautiful fire pit.
(many of these are mentioned in other reviews, but they will save you a lot of hassle and time)
TIME: It says 1 hour but plan on 2 hours. Only a person who had put together about 5 of these perviously would be able to do it in an hour.
LOCATION: Plan to build it close to where you are going to use it as it is heavy to move once built. It can be easily moved by two strong people, but it would be hard for one person to move it any distance.
CARDBOARD: The is one large flat square piece of cardboard that is in the box with the top. Save this piece and use it to lay on the ground while building. Most of the building you will do with the top upside down and having this underneath will protect it from scratches and make it easy to slide around if needed.
INSTRUCTIONS: The instructions are good, but are mainly just pictures. There is very little detail provided. So you MUST carefully examine each picture as you build it, noting the number of holes on top versus the bottom, the direction of pieces and the exact screw needed. It is very easy to start putting a piece together to only realize that you messed up and need to take it a part and re-do it.
SCREW PACKAGE: A nice screw package is provided labeling each group of screws A,B,C, etc so you know which ones to use where. DOUBLE CHECK the labeling. On my package the A screws were labeled B and vice versa. I ended up using the allen screws where I was suppose to use the philips head screws and I ended up having to re-do the first couple of steps. Verify on the picture whether they want you to use the allen screws or philips head screws. Basically you will use the allen screws to attach the sides to the top, and you will use the philips head screws for everything else.
SCREW TIGHTENING: Almost every review mentions this advice and it is very important. When attaching a section together, first partially screw the screws in and once it is al attached, THEN tighten them down. The holes often do not line up perfectly and you will need a little "play" to line them up before tightening. The MOST IMPORTANT time to follow this is when you attach the sides to the top. DO NOT TIGHTEN all of the allen screws which are used to attach the sides to the top until you have ALL of the sides partially screwed in... then tighten everything down. If you don't follow this you will not be able to get all of the screws to match up to the holes. Also, on some pieces I found it useful to have a pair of pliers or hammer to bend some of the pieces a little so that the holes line up.
TANK COVER: A nice black vinyl tank cover is provided. It is easiest to put this on from the bottom upward and not from the top down.
TANK HOSE: I found it easiest to attach the hose to the tank and then rotate the tank clockwise a bit to tighten the hose up. This enables the hose to wrap closely around the tank and thus make it fit so that the door closes easily.
FIRE PIT COVER: A nice fitting cover is provided for the fire pit and even includes a little extra room at top to allow for the fake logs. This cover is a very thin and cheap vinyl. Be very careful when you put it on (especially if it is cold) as it will tear VERY EASILY at the corners. I would recommend turning the cover inside-out and reinforcing the edges and corners with duct tape first. Then use the cover as normal with the tape on the inside protecting the edges and corners. If you don't do this you will eventually tear the cover.
STARTING THE FIRE: Many have noted this as well, but it is easy to overlook. It does NOT start the same as a typical gas grill. To start the fire turn the knob to the start position and HOLD IT IN. While holding it in, press the electric starter. You must keep holding it in until it lights up (this can take a few seconds) and then you will need to KEEP HOLDING IT IN until the fire gets going. If you let go too soon it will just go out.
WINE: Don't keep a bottle of wine on the table top for very long as it will heat it up pretty fast if the fire is going...and who likes warm wine..ugh.
Overall this is an awesome product at a great price. The shipping was very fast (only a few days) and the item came in one large box. If you are patient and follow the above directions (or have a friend/relative who is) you will have it built and be using it to warm yourself in no time at all.
Just spoke to blue rhino rep on their 800 number. She told me it is supposed to soot and smell because it is made to simulate a campfire.
Because of that response I would totally NOT recommend this pit. The fumes make you nauseous and the rocks/lava/glass are solid black. The company response is totally unacceptable and avoidance of the issue, which by the reviews is a big problem for every buyer.