The new CT26 incorporates increased capacity, innovation and versatility into this new design. With the dual mode power activation, the user chooses either a tool activated or manual activated start-up. This CT (Cleantec®) unit is extremely mobile, with a sturdy chassis, extra large low abrasion rear tires, and double swivel casters up front to easily negotiate any obstacle. The CT26 dust extractor can be secured in place with a single point foot brake. The filter bags have even been redesigned to be self cleaning. These bags inflate and deflate with the cycling of the unit for maximum suction force and efficiency. An integrated hose garage has been added for easy hose storage. As with all Festool dust extractors, the CT26 utilizes the Sys-Dock system that facilitates the use/storage of one or more Systainers to the top of the unit. Will work wet or dry with no complex conversion, and is remarkably quiet. Includes: CT 26 E - 6.9 Gallon HEPA Mobile Dust Extractor, HEPA Filter, (1) Fitted Filter Bag, and (1) 1 1/16" x 11.5' Antistatic Suction Hose.
Additional Info: HEPA Filter Surface Area: 3.29 ft2, Weight: 28.7 lbs, ower Cord 12 AWG: 24.5’ length, Stepless electronic suction control.
Festool products can only be sold in the 50 states.
From the Manufacturer
Dust control is an integral part of the Festool system and design philosophy. That is why the CT 26 is equipped with tool-triggered auto start functionality so that when you plug your tool into the supplied outlet socket, the vacuum cycles with the tool. This represents greater efficiency in dust extraction, noise reduction, and with less energy consumption versus a constant-on unit. Variable suction force allows you to regulate the suction based on your tasks. A small detail sander may not require the full 137 CFM of this unit, but a router may require it. This unit comes standard our new self-cleaning bag which prevents dust particles from caking inside the bag which reduces suction. We further optimize efficiency with the low-profile, flat-top design that allows the CT top to double as a tool rest as well as an integrated hose garage and docking station that allows the connection of Festool Systainers (not included) for easy transport and storage. The low center of gravity, integrated center handle, and extra large wheels make navigating rough terrain in the shop or jobsite easy without tipping over. A parking brake can even be locked to prevent unintentional roll off or drifting. The supplied 11-1/2 ft. anti-static (AS) hose is long enough for power tool and general work site clean up tasks. For wet (water) clean up tasks, the CT will shut off automatically when full thanks to Level Stop technology. With an industrial design for heavy use the CT is equipped with over 24 feet of 12 gauge cord. A cord wrap is supplied to attach to the rear of the unit. With 137 CFM and only 62 dB (on the low setting), the CT 26 can quickly and quietly remove large amounts of debris, with minimal noise. A HEPA filter comes standard and offers the ultimate in clean air and filtration. The CT 26 is a good choice for the shop or the jobsite for all your power tool extraction and clean-up needs. Capacity: 6.9 gallons (26 liters). Weight: 28.7 lbs. Made in Germany.