|Item Weight||16 pounds|
|Product Dimensions||13.5 x 30 x 8.5 inches|
|Item model number||2430|
|Is Discontinued By Manufacturer||No|
|Manufacturer Part Number||2430|
|OEM Part Number||2430|
|Cover Included||Firestone 2430 Ride-Rite Air Springs - 2430|
|Special Features||Capacity: 4,800 lbs., Drilling Required: No, Location: Fits Rear Axle|
|Vehicle Service Type||Works with the following vehicles: 2007 GMC Sierra 1500, 2008 GMC Sierra 1500, 2009 GMC Sierra 1500, 2010 GMC Sierra 1500|
Other Sellers on Amazon
+ Free Shipping
+ Free Shipping
+ Free Shipping
Firestone W21-760-2430 Ride Rite Air Spring System
|Price:||& FREE Shipping. Details & FREE Returns|
|You Save:||$79.86 (20%)|
Frequently bought together
More items to explore
What other items do customers buy after viewing this item?
Compare with similar items
Firestone 2158 Air Command System - Standard-Duty Single Leveling System
Firestone W217602250 Ride-Rite Kit for GM C2500HD/C3500
Firestone W217602407 Ride-Rite Kit for Toyota Tacoma 4WD
Firestone W217602445 Ride-Rite Kit for Toyota Tundra
AIR LIFT 57215 LoadLifter 5000 Series Rear Air Spring Kit
|Sold By||Amazon.com||4Wheel Drive Hardware||Amazon.com||Amazon.com||Amazon.com||Amazon.com|
|Item Dimensions||13.50 x 30.00 x 8.50 inches||6.38 x 7.50 x 7.50 inches||10.50 x 8.50 x 13.50 inches||13.50 x 8.50 x 10.50 inches||13.50 x 8.50 x 10.50 inches||0.00 x 0.00 x 0.00 inches|
|Mfg Warranty Type (i.e. Parts, Labor)||Parts||—||Parts||—||Parts||—|
Have a question?
Find answers in product info, Q&As, reviews
Your question may be answered by sellers, manufacturers, or customers who purchased this item, who are all part of the Amazon community.
Please make sure that you are posting in the form of a question.
Please enter a question.
Ride-Rite air helper springs mount between the frame and the suspension of light-trucks, vans, and motorhomes. The heavy-duty convoluted air springs will handle all leveling needs with load carrying capacities between 3,200-5,000 pounds per set. Ride-Rite air helper springs will level the vehicle front-to-rear and side-to-side, stabilize the vehicle while loaded, maximize vehicles load carrying capacity and features adjustability 5-100 Pascal per square inch. Each kit is weighed to ensure component count and each air spring is pressure tested before leaving the factory. Over 1 million cycle life test. It is ISO certified. Can be used on pick-Ups, class A,B,C motorhomes, vans, commercial vehicles and SUV's. The Kit includes air springs, air line, fasteners, upper and lower brackets, inflation valves, push-to-connect air fittings and detailed instructions.
Customers who bought this item also bought
There was a problem filtering reviews right now. Please try again later.
I like the air bags and they seem to be well made. My brother has some on his Dodge and they work great so I expect them to do what they are advertised to do.
Lastly in case you decide to install your air bags without a compressor and with a T so they both fill up at the same time and level, I'll make the following suggestion:
I ran the air valve up through the hole in the bottom of the rear passenger side bed rail hole and turned it out through the hole into the bed. I slid a piece of fuel line over the tubing, put a clamp on and tightened it so I could move it but with a little friction. Then I slid the line down through the hole until it was protecting the tubing where it goes through the hole in the bottom of the rail hole. The clamp keeps it from going further down and a little friction keeps it from working it's way up. I put fender washers on both sides of the air valve and used the provided nut to tighten in place. This way I don't have to get on my knees to adjust the pressure. I only adjust the pressure when I'm camping so I have a compressor with me.
I do think these are worth purchasing but get ready for a project if you install yourself
I've added a couple of pictures of the heat shield so you can see how it's installed. Hope this helps.
Here are the links to the accessories:
Note: with the minimum 5psi, it still lifted my 1500 Silverado about 1/2inch and the ride is a bit rougher.
Top international reviews
only problem i had was one of my rubber bumpers on my truck that u have to remove, the bolt broke and that took awhile to get out cause it was rusted right in there.
I've only used it so far with my 850 Outlander and I'm very impressed so far. Will update after towing my 24' Trailer.