There's several listings of these 25mm plates with stop pins, I have ones from Bestshoot and Fotasy, and they all appear mostly identical with slight manufacturing fluctuations.
There's also a few other 25mm plates with slightly different designs, some shorter, all without stop pins, but this isn't about them.
These are well-made enough, good for compact applications, the main 1/4-20 screw takes a 4mm hex (or flathead screwdriver), and the stop pins are removeable with 2.5mm hex.
The problem is finding a clamp that stays low profile and can take these plates as-is.
So far I've only found two (at B07TPS89PR and B07W1CLXY5 if you know how to enter Amazon URLs manually) that I can personally confirm are close to the same width of the plate, hold these plates centered, and clamp along the entire side of the plate. Unfortunately, they've been subjected to Amazon Product Churn and don't seem to be available unless you dig around on more... direct-from-source websites.
The fishbone style clamps don't have slots for stop pins, so they'd either have to be removed, or the plate has to be put in offset, with one stop pin in the clamp's screw hole and only part of the side being gripped. I don't like the sound of either of those.
I've also gotten one of the very common 38mm clamps which look like they'll work, but the stop pin slots are too wide apart by literally just a couple millimeters. It is possible to put the plate in offset, one stop pin in the clamp's screw hole again, while still clamping the entire edge of the plate, but this is already getting too wide for some of my use cases.
There are also some 25-26mm clamps on Amazon that look like they might work, but they're rather more expensive than the designs that I know work, and I'm not sure I want to bother with going through even more try-and-return processes.
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Additional Details
Small Business
Shop products from small business brands sold in Amazon’s store. Discover more about the small businesses partnering with Amazon and Amazon’s commitment to empowering them.
Small Business
This product is from a small business brand. Support small.
Frequently bought together
$6.89
Get it as soon as Tuesday, Apr 9
Only 12 left in stock - order soon.
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may deliver to you quickly
Page 1 of 1 Start overPage 1 of 1
Product Description
25mm Arca Swiss QR Plate
Compare with similar items
This Item  Fotasy 25mm Arca Swiss Plate, 25mm QR Plate, Quick Release Plate, Small Arca Plate, Tiny Quick Release Plate fits Arca-Swiss Universal Standard Clamp for Mirrorless Camera Compact DC Tripod Ballhead |  |  |  |  |  | |
| Price | $6.89 | $14.95 | $17.89 | $21.99 | $9.99 | $24.95 |
| Delivery | Get it as soon as Tuesday, Apr 9 | Get it as soon as Wednesday, Apr 10 | Get it as soon as Tuesday, Apr 9 | Get it as soon as Tuesday, Apr 9 | Get it as soon as Tuesday, Apr 9 | Get it as soon as Tuesday, Apr 9 |
| Customer Ratings | ||||||
| Value for money | ||||||
| Sturdiness | ||||||
| Versatility | ||||||
| Stability | ||||||
| Quality of material | ||||||
| Sold By | RainbowImaging | PGYTECH Direct | Price Right Store | Leftfoto | Fiada US | PICTRON Direct |
| compatible devices | Tripod, Monopod, Video Camera, Arca Swiss Ballhead, Arca Swiss Clamp | Camera | Cellphone, Camera | Camera | Camera | Camera |
| max. recommended weight | — | — | 110 pounds | 4 kilograms | — | 22 pounds |
| weight | 0.84 ounces | 15 grams | — | 0.11 pounds | 2.39 ounces | 0.26 pounds |
Reviews with images
25mm plates with stop pins might all be identical, problem is finding a clamp they'll fit on neatly.
There's several listings of these 25mm plates with stop pins, I have ones from Bestshoot and Fotasy, and they all appear mostly identical with slight manufacturing fluctuations.There's also a few other 25mm plates with slightly different designs, some shorter, all without stop pins, but this isn't about them.These are well-made enough, good for compact applications, the main 1/4-20 screw takes a 4mm hex (or flathead screwdriver), and the stop pins are removeable with 2.5mm hex.The problem is finding a clamp that stays low profile and can take these plates as-is.So far I've only found two (at B07TPS89PR and B07W1CLXY5 if you know how to enter Amazon URLs manually) that I can personally confirm are close to the same width of the plate, hold these plates centered, and clamp along the entire side of the plate. Unfortunately, they've been subjected to Amazon Product Churn and don't seem to be available unless you dig around on more... direct-from-source websites.The fishbone style clamps don't have slots for stop pins, so they'd either have to be removed, or the plate has to be put in offset, with one stop pin in the clamp's screw hole and only part of the side being gripped. I don't like the sound of either of those.I've also gotten one of the very common 38mm clamps which look like they'll work, but the stop pin slots are too wide apart by literally just a couple millimeters. It is possible to put the plate in offset, one stop pin in the clamp's screw hole again, while still clamping the entire edge of the plate, but this is already getting too wide for some of my use cases.There are also some 25-26mm clamps on Amazon that look like they might work, but they're rather more expensive than the designs that I know work, and I'm not sure I want to bother with going through even more try-and-return processes.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
25mm plates with stop pins might all be identical, problem is finding a clamp they'll fit on neatly.
Reviewed in the United States on June 20, 2020
25mm plates with stop pins might all be identical, problem is finding a clamp they'll fit on neatly.
Reviewed in the United States on June 20, 2020
There's several listings of these 25mm plates with stop pins, I have ones from Bestshoot and Fotasy, and they all appear mostly identical with slight manufacturing fluctuations.Reviewed in the United States on June 20, 2020
There's also a few other 25mm plates with slightly different designs, some shorter, all without stop pins, but this isn't about them.
These are well-made enough, good for compact applications, the main 1/4-20 screw takes a 4mm hex (or flathead screwdriver), and the stop pins are removeable with 2.5mm hex.
The problem is finding a clamp that stays low profile and can take these plates as-is.
So far I've only found two (at B07TPS89PR and B07W1CLXY5 if you know how to enter Amazon URLs manually) that I can personally confirm are close to the same width of the plate, hold these plates centered, and clamp along the entire side of the plate. Unfortunately, they've been subjected to Amazon Product Churn and don't seem to be available unless you dig around on more... direct-from-source websites.
The fishbone style clamps don't have slots for stop pins, so they'd either have to be removed, or the plate has to be put in offset, with one stop pin in the clamp's screw hole and only part of the side being gripped. I don't like the sound of either of those.
I've also gotten one of the very common 38mm clamps which look like they'll work, but the stop pin slots are too wide apart by literally just a couple millimeters. It is possible to put the plate in offset, one stop pin in the clamp's screw hole again, while still clamping the entire edge of the plate, but this is already getting too wide for some of my use cases.
There are also some 25-26mm clamps on Amazon that look like they might work, but they're rather more expensive than the designs that I know work, and I'm not sure I want to bother with going through even more try-and-return processes.
Images in this review
Reviewed in the United States on January 13, 2024
Reviewed in the United States on June 14, 2022
Reviewed in the United States on August 7, 2023
