Unit Purchased= 4000 watt. Usage for RV/ 5th wheel travel power.
Received thru Amazon two days after purchase in good shape but missing remote
Received missing remote three days after customer support contacted me.
Pros:
Works as rated. My plans are to use it for my 5th wheel travel power. I got the unit and tested it to see if it would handle the load before installing in my 5th wheel. I put it on four 300amp AGM lifetime batteries using two strands of 4/0 wire for both pos/neg(the four 8 gauge wires provided were too short and did heat up on heavy usage).. Tested with two 1500 watt heaters for 3200 watt load and worked great for about two hours before it took the batteries down to half load and below 10 volts so auto shut off. Recharged batteries and then did second test by adding one more 1500 watt heater (3x) and still work. Went into overload of 6200 watts on startup and then down to 4200 watts and still worked great until the batteries were discharged below 10 volts then auto shut off.
The unit does suck power, but provides the power needed. I then tested it on an RV refrigerator and a microwave. No unusual sounds or issues and provided the needed power. I have not tested the pure sine wave power yet but using it on motors and heaters has not been an issue.
The unit is good sized (generally=length about the size of average mans chest and half the width so it is rather big, but can easily be installed inside a 5th wheel front storage compartment.
The remote switch works great.
Con which turned into a pro: My unit originally came with NO REMOTE. The company actually contacted me thru Amazon e-mail and asked if I got the unit and how it was working. I advised Elsa (Customer Support) that I got NO REMOTE and she sent me one three days later. Excellent customer support. Unit works as advertised and excellent customer support.
Update - (02/10/2019) - I have not installed it in my RV yet but as an electrician, I tested it for pure sine wave power and it meets specs. I've had no issues for powering my computers and sensitive electronic components. However, this unit will pull over 600amps (12 volt) on full power usage so I would highly recommend users greatly upgraded their wiring and also use multiple stands of heavy gauge wire. I elected to use 4/0 wire and used three strands as I had extra wire left over from another solar project (two strands 4/0 works fine too). The larger the wire, the better and the more strands, the better. This unit will pull lots of amps.
| Manufacturer | GIANDEL |
|---|---|
| Brand | Giandel |
| Item Weight | 12.85 pounds |
| Product Dimensions | 15.7 x 9 x 3.5 inches |
| Item model number | PS-2200KSC |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | PS-2200KSC |
| Special Features | 2200Watt Pure Sine Wave inverter, With Remote, With LED display |
| Voltage | 12 Volts |
| Wattage | 2200 watts |
