|Item Weight||3.9 pounds|
|Product Dimensions||11.2 x 3 x 3 inches|
|California residents||Click here for Proposition 65 warning|
|Item model number||P635|
|Item Package Quantity||1|
|Warranty Description||One Year Limited Warranty through Grex Power Tools|
Other Sellers on Amazon
+ Free Shipping
Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner
|Price:||$188.00 & FREE Shipping. Details|
|You Save:||$27.98 (13%)|
- Enter your model number to make sure this fits.
- Powerful motor penetrates fasteners through the hardest materials
- Shoots fasteners up to 1-3/8-inch length easily, even-inch hardwoods
- Patented design eliminates need to adjust for different fastener lengths
- Double trigger safety prevents accidental firing of tool
- Narrow nose reaches tight areas and corners for detailed trim work
Frequently Bought Together
Customers Who Bought This Item Also Bought
1. A narrow nose allows for fine, detailed work.
2. A no-mar tip protects your work surface.
3. A safety trigger prevents accidental firing.
4. A self-adjusting magazine makes pin changes easy.
Ideal for detailed woodworking and finish work, the P635 gives you the flexibility and power you need to tackle a host of pinning jobs. Equipped with an industrial-strength motor, this pinner easily penetrates hardwoods such as oak and beech. And even with its high-power performance, the P635 allows for fastening of delicate, thin, and small wood pieces without splitting--something that's simply not possible with larger fasteners.
Suitable for both hard and soft woods, the P635 fits pins up to 1-3/8 inches long for strong holding power.View larger.
The pinner's broad fastener range accepts pins from 3/8 inch to 1-3/8 inches in length--nine different sizes--making it the perfect go-to gun. Plus, the P635's fastener capacity is one strip (approximately 100 pins), letting you work with little interruption.
For its innovative features, the P635 has been named one of the "Best New Tools" in the December 2005 issue of Popular Woodworking and the "Best Bet" of headless pinners in the April 2007 issue of Woodworker's Journal. The P635 has also been listed in Taunton's Tool Guide as the "Readers' Choice" two years in a row (2008 and 2009).
Lightweight Body with Narrow Nose for Easy Maneuvering
Weighing only 2.21 pounds, the P635 keeps you working comfortably when you're performing extended or overhead pinning jobs. And with its narrow nose and short length (less than eight inches), this pinner is perfect for accessing tight spaces, and the rear cut-away magazine helps the tool reach into corners.
If you frequently perform detailed trim work, this pinner's compact design gives you the control and flexibility you need to create an attractive finished product. And for jam clearing, the P635's removable nose cover provides easy access. The hex key to remove the nose cover is conveneiently stored on the rear of the magazine.
No-Mar Tip and Safety Trigger Provide Clean, Safe Performance
If you want to avoid visible holes or splits in a finished piece, the P635 is a great choice. The pinner is similar to a finish or brad nailer, but it uses smaller nails, so it fires fasteners that hardly leave a trace. Despite being a very thin headless fastener, the tool uses 23-gauge headless pins that provide a significant amount of holding power when driven in correctly. And because the pins leave holes that are practically invisible, there is no need for puttying and sanding. This means you'll achieve better-looking results while saving time.
The P635 also makes it possible to fasten pre-finished material. The removable no-mar tip works with smooth precision, so do-it-yourselfers and professionals alike can enjoy clean, expert results.
For added security and control, the pinner is built with a double-trigger safety, which prevents accidental firing. To fire a pin, you simply pull back the safety trigger and then engage the pinning trigger. For added convenience, the pinner includes quick access magazine storage for the wrench, magazine angled cut-off, and a fastener indicator that lets you know when reloading is necessary.
And to ensure a more relaxed work environment, the P635 has a rear-exhaust system with a built-in silencer, which directs the tool's exhaust away from the user and reduces the noise to a comfortable minimum. Constructed mostly of metal--with a hardened steel driver and nose piece, aluminum internal parts, aluminum housing, and aluminum extruded magazine assembly--this tool is built to last. And with a convenient belt hook, the pinner is easy to carry with you wherever you go.
Great for a Variety of Uses: From Frame Assembly to Joint Pinning
The P635's many capabilities give you the freedom to use it in a variety of situations, covering your pinning needs everywhere from craft shops to construction sites. Grex recommends the pinner for the following applications: finishing, molding, decorative trimming, lightweight paneling, dowel and joint pinning, window beading, display and sign creation, and assembly of mirrors, picture frames, rattan furniture, and more.
What's in the Box
Grex P635 23-Gauge, 1-3/8-Inch-Length Headless Pinner, plastic carrying case, bottle of tool lubricant, set of hex keys, and owner's manual.
From the Manufacturer
Top Customer Reviews
The only small problem was when adding a new shank of pins to a nearly empty gun.. that when the previous shank was used up the new shank due to the smallest misalignment wouldn't pin.. .not a biggy..It just meant one had to very carefully load the pinner and make sure the same size of pins was in-line with the prior shank of pins. Very hard to tell if the gun is firing or not. But minor concerns with such a Great Tool! It's very powerful judging at the strength of penetration into a wood (Ipe) that is very close to being the hardest of woods. 18 guage would shatter and split the wood and only my battery actuated Dewalt 16 guage gun would consistantly penetrate but only at a right angle and with occasional splitting. Only 23 guage pins would toe nail w/o bouncing off.
Someone described this as the "Lexus of pinners". Seems very true. Also the extra finger safety 'flipper' was annoying and my helper just taped it to the handle as we found that it was more likely to accidently fire with the intricacy of manipulating the safety on than having it taped off (down). Works now very well. No hitches. Comes with the usual leaky bottle of oil..but not even one pin in the box. Make sure you order some if you don't have 'em when ordering this gun.
after a month or so...revised review.Read more ›
A very minor gripe: it is difficult to load a new clip of pins when there are a few still left on the old clip. The spring mechanism pushes the two clips together pretty hard when you close the magazine, and the ends of the clips can get doubled up, jamming the magazine. I was unable to fix this, so I just made sure I only refilled when it was completely empty. Kind of a hassle on the ladder, but there are so many pins in a clip it didn't matter to me that much. I don't know if this was a problem on the other pinner I tried out because I never thought to check.
If you've never used a pinner, you should know that it is NOT going to replace your finish nailer. In other words, don't plan on a pinner to hold up oak trim on a coffered ceiling. You can put the smaller stuff (cove, bead) up with the pinner, and you get perfect results.
Another great use for the pinner is holding the returns on small pieces of trim while the glue sets up. Things that you cannot clamp together can be pinned and you'll probably never see the tiny hole. Plus, no problems with splitting the end grains either! Saves me hours of hole-filling and irritation.
This pinner has the dual trigger, and it works well. One safety note, don't get complacent about holding the safety trigger down and waving the gun around at the same time (away from the workpiece). There is no safety tip to depress, so it will fire away.Read more ›
Most Recent Customer Reviews
Wrote review under the pins that I ordered for this gun. It works great!Published 3 months ago by Amazon Customer
This is the best nail gum I own. I have and have had several different makes and models of nail guns and this is by far the best I have ever purchased. The quality is superb.Published 3 months ago by Nancy H.
Can't imagine how this tool could be improved. Worked perfectly every time. Does not bend pins in hard wood. Does not overdrive pins in soft wood.Published 4 months ago by SoleSurvivor
i purchased a P635 approximately 10 years ago (cant remember its been so long),,,,pretty much when they first came out , if memory serves Grex was the first to have a 23 ga nailer... Read morePublished 5 months ago by david b
Had it about 2 weeks or so. Wasn't setting the brads quite deep enough for me but after I took the little green tip off it was perfect. A lot better than my old bostitch!Published 5 months ago by Amazon Customer