Currently unavailable.
We don't know when or if this item will be back in stock.

Have one to sell? Sell on Amazon

Grizzly G4003G Gunsmith's Bench Top Lathe with Stand


Currently unavailable.
We don't know when or if this item will be back in stock.
    This fits your .
  • Enter your model number to make sure this fits.
  • High-quality NSK spindle bearings
  • Removable gap bed allows turnings up to 17-Inch in diameter
  • Easy to use lever controls
  • Hardened and ground cast iron bed
  • Full length splash guard
Currently unavailable. We don't know when or if this item will be back in stock.

Special Offers and Product Promotions

  • Working on a home project? Need some help? Check out Amazon Home Services and get $30 cash back when you book select services. Learn more


Technical Details

  • SPECIFICATIONS: Motor: 2 HP, 110V/220V, single-phase, TEFC capacitor start induction, 60 Hz, 1725 RPM, pre-wired to 220V Amps: 20A at 110V, 10A at 220V Power transfer: Belt drive Precision-ground cast-iron table Table size: 23-5/8" x 17-1/4" x 1-1/2" thick Table tilt: 5° left, 45° right Floor to table height: 37-1/2" Cutting capacity/throat: 16-1/4" left of blade Maximum cutting height: 12" Blade size: 131-1/2" long Blade width range: 1/8" - 1" wide 2 blade speeds: 1700 and 3500 FPM Wheel covers: Pre-formed steel Blade guides: Ball-bearing with full enclosure protection Bearings: Sealed and permanently lubricated Overall size: 73" H x 32" W x 32" D Approximate shipping weight: 418 lbs.

Product Information

Technical Details

Item Weight 1,253 pounds
Product Dimensions 65.2 x 29.5 x 29 inches
Item model number G4003G
Size Not applicable
Color Not applicable
Style Grizzly
Finish Steel
Horsepower 2
Item Package Quantity 1
Speed 1400 RPM
Measurement System metric
Special Features SPECIFICATIONS: Motor: 2 HP, 110V/220V, single-phase, TEFC capacitor start induction, 60 Hz, 1725 RPM, pre-wired to 220V Amps: 20A at 110V, 10A at 220V Power transfer: Belt drive Precision-ground cast-iron table Table size: 23-5/8" x 17-1/4" x 1-1/2" thick Table tilt: 5° left, 45° right Floor to table height: 37-1/2" Cutting capacity/throat: 16-1/4" left of blade Maximum cutting height: 12" Blade size: 131-1/2" long Blade width range: 1/8" - 1" wide 2 blade speeds: 1700 and 3500 FPM Wheel covers: Pre-formed steel Blade guides: Ball-bearing with full enclosure protection Bearings: Sealed and permanently lubricated Overall size: 73" H x 32" W x 32" D Approximate shipping weight: 418 lbs.
Batteries Required? No
Assembled Diameter 17 inches

Additional Information

ASIN B000M630HC
Customer Reviews
0.0 out of 5 stars
Best Sellers Rank #2,738,801 in Home Improvements (See top 100)
#429 in Home Improvement > Power & Hand Tools > Power Tools > Planers
Shipping Weight 1,253 pounds
Date First Available June 5, 2013

Warranty & Support

Product Warranty: For warranty information about this product, please click here

Feedback

Would you like to give feedback on images?
Would you like to tell us about a lower price?

From the Manufacturer

Front View
Brass-tipped Spider Bolts
G4003G 12' X 36' Gunsmith's Lathe with Stand

When we set out to design a professional gunsmith's lathe, our G0509G, we felt that we should also make a smaller starter lathe for aspiring hobby gunsmiths. Don't let the 'smaller' size fool you — this is a serious metal lathe with many features that will allow you to turn and chamber barrels just like the bigger one. Plus, it's one heck of a metal cutting lathe. Check out all the interesting features!

Construction

Hardened and ground cast iron bed, removable gap bed allows turnings up to 17' in diameter, hardened and ground V-ways and cast aluminum gear cover. Precision ground gears and high precision NSK bearings. Heavy-duty cast iron stand included.

Spindle & Tailstock

D1-5 spindle nose (6 pin), 40mm spindle bore and outboard spindle has 4 brass-tipped screws for supporting barrels. Tailstock lock features 1/2' square drive stud for torque wrench.


Tailstock
Standard Equipment

6' 3-Jaw chuck with 2-pc. reversible jaws; 8' 4-Jaw chuck with reversible jaws; 10' faceplate; Steady rest/follow rest with roller tips; Full length splash guard; Cast iron stand with extended base; 200 Series quick change tool post with included holder; Two MT #3 dead centers (1 carbide-tipped); One MT #3 live center; Set of six change gears; 1/2' chuck with MT #3 arbor; Tool box

Specifications Features:
  • Motor: 2 HP, 220V, single-phase, 8.5 Amps, 60 Hz, 1725 RPM
  • Swing over bed: 12"
  • Swing over gap: 17"
  • Swing over cross slide: 7"
  • Distance between centers: 36"
  • Bed width: 7-1/4"
  • Spindle bore: 40mm
  • Spindle nose taper: MT#5
  • Spindle nose: D1-5 Camlock
  • Cross slide travel: 6-1/4"
  • Compound travel: 3-1/4"
  • Carriage travel: 30-1/2"
  • Tailstock barrel taper: MT#3
  • Tailstock barrel travel: 4"
  • Number of speeds: 9
  • Range of speeds: 70, 200, 220, 270, 360, 600, 800, 1000, 1400 RPM
  • Height w/o stand: 23"
  • Height w/ stand: 54-1/2"
  • Length w/ stand: 61"
  • Width of stand: 26"
  • Approximate shipping weight: 1374 lbs.
  • High-quality NSK spindle bearings
  • Removable gap bed allows turnings up to 17" in diameter
  • Nine spindle speeds - ranging from 70 to 1,400 RPM
  • Easy to use lever controls
  • Hardened and ground cast iron bed
  • Cuts 4-112 Standard TPI and 0.2-4.5 Metric
  • Full length splash guard
  • Spindle on/off reverse switch on carriage
  • Halogen work light
  • Ball bearing steady/follow rests
  • Outboard end support screws
  • Socket for tailstock lock
  • Heavy-duty steel stand
  • Cast aluminum gear cover
  • D1-5 spindle nose (6 pin)
  • 40mm spindle bore

Customer Questions & Answers

Customer Reviews

There are no customer reviews yet.
5 star
4 star
3 star
2 star
1 star
Share your thoughts with other customers