|Screen Resolution||4096 x 2160 pixels|
|Max Screen Resolution||4096 x 2160|
|Memory Speed||4500 GHz|
|Graphics Coprocessor||Radeon HD 7750 PCIe|
|Graphics Card Ram Size||1 GB|
HIS HD7750 Radeon Graphic Card H775P1GD
We don't know when or if this item will be back in stock.
- Enter your model number to make sure this fits.
- iSilence 1GB (128bit)
- DisplayPort HDMI DL-DVI-D
- HDCP PCI Express X16 3.0
Customers Also Shopped For
Top Customer Reviews
Un-installed my previous card and it's drivers, plugged in the HD7750, downloaded the latest drivers from AMD, and everything looked good on my primary monitor.
Trouble showed up when I connected the second monitor: the sync wasn't quite right and part of the display would periodically rip and tear. That would get better after running for a few hours but never went entirely away. Eventually I found a setting in the card's management software (Catalyst Control Center) that seems to have fixed the problem. Under My Digital Flat-Panels\Properties (Digital Flat Panel) check the box labeled "Reduce DVI frequency on high-resolution displays".
The next problem appeared when I connected a 3rd monitor: it would only work if I disabled one of the other two monitors. I thought these cards could run 3 monitors, but if so, I have not discovered the trick. Monitors 1 and 2 are 1920 x 1200 displays and the 3rd monitor is 1920 x 1080.
The 3rd problem, and it's the deal breaker, is that I can no longer play Blu-rays: the picture is recognizable but a shifting irregular patch of the screen continuously pixelates into 1/4" blocks. I have tried every permutation of settings in Catalyst Control Center that seemed likely to help with no improvement. However, after patching TotalMedia Theater 3 to the latest version, my Blu-ray playback problem went away so I'm raising my opinion from 2 to 3 stars.
Previous video cards on this and other machines just worked as expected: install the drivers and go. This one wants to be a project.
I have bought 3 of them locally for new computers. As long as your case has some fans the card will stay cool. Remember that video cards often run happily at 80 C for many years.
The card does not have a power connector, as it is not needed. It will not work with a second card in CrossFire, on most boards, as they do not supply 75 watts to the second PCI-X slot.
The card works well with two monitors. To use three monitors, one must use a displayport connector.
Most Recent Customer Reviews
can drive my ultra hd 4k monitor, which is awesome. Recommended for anyone who wants a quiet, low power graphics card.Published on October 31, 2013 by Brad J. Rawlins
I wanted a fanless video card to replace my loud one with a fan. I couldn't of chose a better one for my needs. I am not a huge gamer but to appreciate nice graphics. Read morePublished on August 19, 2013 by Russell Boyd