Currently unavailable.
We don't know when or if this item will be back in stock.
Deliver to Finland
Added to

Sorry, there was a problem.

There was an error retrieving your Wish Lists. Please try again.

Sorry, there was a problem.

List unavailable.

XCSOURCE FT232RL 3.3V 5.5V FTDI USB to TTL Serial Adapter Module Arduino Mini Port TE203

3.9 3.9 out of 5 stars 85 ratings
Currently unavailable.
We don't know when or if this item will be back in stock.
Specific Uses For Product personal
Connector Type Serial Adapter
Item dimensions L x W x H 1.69 x 0.69 x 0.47 inches
Brand XCSOURCE
Item Weight 0.07 Kilograms

About this item

  • Support 3.3V, 5V
  • chipset FT232RL
  • USB power has over current protection, using 500MA self-restore fuse
  • Module size:36mm(length)*17.5mm(width)
  • Pin definition: DTR,RXD,TX,VCC,CTS,GND
Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.

Looking for specific info?

Product information

Technical Details

Collapse all
Other Technical Details

Additional Information

Warranty & Support

Amazon.com Return Policy:You may return any new computer purchased from Amazon.com that is "dead on arrival," arrives in damaged condition, or is still in unopened boxes, for a full refund within 30 days of purchase. Amazon.com reserves the right to test "dead on arrival" returns and impose a customer fee equal to 15 percent of the product sales price if the customer misrepresents the condition of the product. Any returned computer that is damaged through customer misuse, is missing parts, or is in unsellable condition due to customer tampering will result in the customer being charged a higher restocking fee based on the condition of the product. Amazon.com will not accept returns of any desktop or notebook computer more than 30 days after you receive the shipment. New, used, and refurbished products purchased from Marketplace vendors are subject to the returns policy of the individual vendor.

Feedback

XCSOURCE FT232RL 3.3V 5.5V FTDI USB to TTL Serial Adapter Module Arduino Mini Port TE203

XCSOURCE FT232RL 3.3V 5.5V FTDI USB to TTL Serial Adapter Module Arduino Mini Port TE203

Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.

Where did you see a lower price?
/
/
/
/
Please sign in to provide feedback.

Product Description

Specifications: 100% brand new Support 3.3V, 5V chipset FT232RL USB power has over current protection, using 500MA self-restore fuse RXD/TXD transceiver communication indicator Pin definition: DTR,RXD,TX,VCC,CTS,GND Pitch:2.54mm Module size:36mm(length)*17.5mm(width) Driver download address: http://www.ftdichip.com/FTDrivers.htm

Customer reviews

3.9 out of 5 stars
3.9 out of 5
85 global ratings

Customers say

Customers like the performance, value, and ease of use of the electronic adapter. For example, they mention it works great, is inexpensive, and worth its weight in gold. Some appreciate the easy to install driver and trouble-free operation.

AI-generated from the text of customer reviews

16 customers mention16 positive0 negative

Customers are satisfied with the performance of the adapter. They mention that it works well with both ESP01 and Arduino Pro Mini, and that it can be used as a diagnostic adapter for a 1994 Chevrolet Impalla SS LT1.

"Worked great for me on my mac laptop. Got them fast. Didn't have any issues...." Read more

"Works well provided you can get proper drivers online...." Read more

"Used this to unbrick a router, worked flawlessly...." Read more

"Worked well until I dropped it and the USB connected snapped off. The anchors on the sides of the connector were not soldered well at all...." Read more

5 customers mention5 positive0 negative

Customers appreciate the value of the electronic adapter. They say it's well-made, inexpensive, and worth its weight in gold.

"...Well made and inexpensive." Read more

"It is has an official ftdi chip on it, and is a good price, and has an easy to install driver" Read more

"worth its weight in gold! helped get my esp8266 programmed and running" Read more

"Works great, great price. Onboard jumper allows selecting 3.3 or 5v." Read more

4 customers mention4 positive0 negative

Customers find the electronic adapter very easy to use. They say the driver installs automatically on their Windows 10 PC and the adapter operates trouble free. They also mention that the driver is easy to find and install.

"So far no issues. Driver is easy to find simply by googling FTDI32 driver. Love the switchable voltage between 3.3 and 5v." Read more

"...This is very easy to use, and I can use it with my Mac or Windows to update the settings on my OSD...." Read more

"Easy to use! Drivers installed automatically on my Windows 10 PC.Recognized as a COM port instantly." Read more

"...an official ftdi chip on it, and is a good price, and has an easy to install driver" Read more

Works with my Arduino
5 Stars
Works with my Arduino
Slow to get here, but it did. Works as advertised. I included a close up of the chip on the board I received.
Hide
Thank you for your feedback
Sorry, there was an error
Sorry we couldn't load the review

Top reviews from the United States

Ace
5.0 out of 5 stars nice product
Reviewed in the United States on September 17, 2015
Verified Purchase
Worked great for me on my mac laptop. Got them fast. Didn't have any issues. I especially like that there are LEDs for TX and RX so you can see activity.
Helpful
 Report
H.L.
5.0 out of 5 stars Works great so far.
Reviewed in the United States on October 20, 2015
Verified Purchase
So far no issues. Driver is easy to find simply by googling FTDI32 driver. Love the switchable voltage between 3.3 and 5v.
Helpful
 Report
Amazon Customer
1.0 out of 5 stars Fake FT232RL chip prevents FT_Prog programming
Reviewed in the United States on November 28, 2016
Verified Purchase
The Fake FT232RL works as delivered though cannot be reprogrammed using FTDI's FT_Prog for often needed inverted serial data and control lines, and control ports. I would have saved a bunch of time had I known this board used a fake FT232RL from the start.
Helpful
 Report
Jawny luckadawg
3.0 out of 5 stars Works well but......
Reviewed in the United States on December 2, 2016
Verified Purchase
Works well provided you can get proper drivers online. Would be nice if the USB plug was either updated to micro..... OR ship it with a multi plug adapter. Worked well for my application.
Helpful
 Report
Levi
4.0 out of 5 stars This is very easy to use
Reviewed in the United States on December 13, 2015
Verified Purchase
I use this to update my minimosd on-screen-dispplay for my miniquad fpv system. This is very easy to use, and I can use it with my Mac or Windows to update the settings on my OSD. Trouble free operation, but you need a USB cable with a plug (same as used by mobius cam).
One person found this helpful
Helpful
 Report
John N
5.0 out of 5 stars Very pleased ;)
Reviewed in the United States on January 9, 2016
Verified Purchase
Used this to unbrick a router, worked flawlessly. Drivers loaded fine, solder joints looked good, and the ability to choose 3.3 or 5 volts made the project that much easier...
Helpful
 Report
Noel
2.0 out of 5 stars Worked well until I dropped it and the USB connected ...
Reviewed in the United States on April 1, 2016
Verified Purchase
Worked well until I dropped it and the USB connected snapped off. The anchors on the sides of the connector were not soldered well at all. I highly suggest people load those anchors up as much as you can before handling it much. Once it breaks off it's really hard to resolder.
Helpful
 Report
Michael B
5.0 out of 5 stars This is a good FTDI programmer
Reviewed in the United States on October 16, 2015
Verified Purchase
This is a good FTDI programmer. It has a jumper for 3.3 or 5v operation.

The only downside is that most things I want to program with it have pins also, so I need to jump them all together. Would be nice if there was an adapter for straight through coupling to another board.
Helpful
 Report

Top reviews from other countries

Translate all reviews to English
Fernando
5.0 out of 5 stars Adaptador USB a TTL
Reviewed in Spain on September 1, 2017
Verified Purchase
El módulo adaptador me ha servido muy bien para poder programar mis diferentes microcontroladores tanto con 5 V, otro con 3,3v
Report
Joel Righter
5.0 out of 5 stars A must have for many hardware hacks and communication
Reviewed in Canada on February 25, 2016
Verified Purchase
I've had no issues using this board. Added pins to the holes down both sides to give access to all the chips features and it remains breadboard friendly.
Report
Tony
5.0 out of 5 stars Responsible seller. Quality producr.
Reviewed in Canada on May 10, 2017
Verified Purchase
Used to update esp-01 firmware with no issue. The seller quickly sent a replacement when the first one received with the pins crushed.
One person found this helpful
 Report
Amazon Customer
5.0 out of 5 stars Five Stars
Reviewed in the United Kingdom on June 11, 2017
Verified Purchase
Great small boards, worked out the bag, not problems
Report
BECKER
5.0 out of 5 stars Impeccable
Reviewed in France on November 3, 2016
Verified Purchase
Pour pas cher, de bons FTDI pour Arduino. Vérifiez le sens du branchement du connecteur 6 broches, et si ça ne fonctionne pas... retournez le car sur certains modèles (peut être pas celui-la, je ne sais plus) ils sont inversés.
Report