Other Sellers on Amazon
+ Free Shipping
+ Free Shipping
Hyper TX3 - CPU Cooler with 3 Direct Contact Heat Pipes (RR-910-HTX3-G1)
|Price:||$18.80 & FREE Shipping on orders over $49. Details|
|You Save:||$4.21 (18%)|
- Enter your model number to make sure this fits.
- CPU Support: Intel: Core i5 / Core i3 / Core2 Extreme / Core2 Quad / Core2 Duo / Pentium / Celeron AMD: FX-Series / A-Series / Phenom II X4 / Phenom II X3 / Phenom II X2 / Phenom X4 / Phenom X3 / Athlon II X4 / Athlon II X3 / Athlon
- Maximum compatible CPU wattage: over 130W TDP
- Heat Sink Material: Aluminum fin / 3 heat pipes
- Fan Speed: 800 ~ 2800 R.P.M. (PWM)- Noise Level: 17-35 dBA
- Includes 0.1 oz Cooler Master thermal paste.
Frequently Bought Together
Customers Who Bought This Item Also Bought
From the Manufacturer
|Cooler Master’s Hyper TX series has evolved with requirements of mainstream CPUs. The introduction of Hyper TX3 marks another milestone with Cooler Master's first-ever full compatibility - Intel LGA 1156 socket. The Hyper TX3 also brings back the "original" direct contact heat-pipe design from Cooler Master.|
Aluminum fins with 3 x Direct Contact heat pipes to provide outstanding heat dissipation
Universal design: Compatible with Intel Socket LGA 775/1156
Option for adding 2nd fan to increase cooling performance
Universal design: Compatible with AMD Socket 754/939/940/AM2/AM3
Excellent airflow design with compact heat sink dimension (installed on Gladiator 600)
New 92mm PWM fan with wide RPM range and anti-vibration rubber pads
|CPU Socket||Intel Socket LGA775/1156, |
AMD Socket 754/939/940/AM2/AM3
|Heat Sink Dimensions||90 x 51 x 139 mm|
|Heat Sink Material||Aluminum fin + 3 heat pipes|
|Fan Dimension||92 x 92 x 25 mm|
|Fan Speed||800 - 2800 R.P.M. (PWM)|
|Fan Airflow||15.7 - 54.8 CFM|
|Fan Air Pressure||0.35 - 4.27 mm H2O|
|Fan Life Expectancy||40,000 hours|
|Bearing Type||Long life sleeve bearing|
|Voltage Rating||12 V|
|Noise Level||17 - 35 dBA|
|Weight||1.04 lbs; 470g|
Top Customer Reviews
After some searching, I found the Cooler Master Hyper TX3. In keeping with the philosophy of my build (buy the product at the point where performance just about stops increasing linearly with the price), I made the purchase, and the product arrived at my doorstep a few days later.
Cooler Master has elected to use plastic blister packaging for the Hyper TX3. It was easy to open, and required no scissors, which is a refreshing change from most packaging of this type. I received the universal version of the cooler, meaning my version of the TX3 supports Core 2 as well as Core i5, along with pretty much all Athlon 64s and above (Athlon 64, Athlon 64 X2, Athlon II, Phenom, Phenom II.) The cooler does not require installation of a motherboard backplate for use. Since this is a smaller cooler, it uses Intel's standard push-pins or AMD's clips to remain secure. Cooler Master has apparently revised the TX3 recently; previous versions used a clip to secure the 92 mm fan to the heatsink. This clip received VERY mixed reviews (Yes, I do mean VERY - some reviews were absolutely glowing while others had the deepest contempt I have ever seen.Read more ›
Unit arrived in a standard blister pack, and looked HUGE. Thought for a moment I was not going to be able to get it to fit (don't worry -- it does, and with plenty of space to spare). Opened package and poured out the contents. Small box at bottom of package contained all necessary feet/clamps to hold it down. BONUS: Included thermal paste as well! The beauty of this thing, is that you can turn it virtually any direction you want. For maximum air flow and dissipation, I directed the fan to blow towards that rear case fan in order to improve overall heat removal.
Although I already had some Arctic Silver thermal compound, I actually decided to use the included one. Assembled clamps, and mounted to CPU/MB in a matter of seconds. Connected the fan cable to MB, and we were ready to start.
Booted up the computer and went into Speccy. At idle, the CPU was running at a cool 35 degrees C!! That's a difference of almost 40%!! Put a load with a CPU benchmark test, and temp barely got above 46C! Fantastic!!
I must say, the price on this thing is almost too good to be true. I can't think of any reason, at least for this CPU, to buy anything more expensive. Great stuff!
* Great options for mounting
* Superb heat dissipation
* Ultra-quiet fan
* Sturdy construction
* Includes thermal paste/compound
* Absolutely none!
But is this probably the best value cooler w/o spending $50+? I'd be hard pressed to find a better one.
My basic setup: AMD Athlon II X4 630 (2.8 Ghz mild overclock for now to 3.2 Ghz), MSI mb, 2 GB DDR2 ram, XFX ATI 5750.
With the stock heatsink and fan at this O/C my idle temp was ~ 32-34 C, at load around 52-54 C.
Not a difficult install, instructions are terrible but for an AM2+, AM3 chip it's quite easy with no tools, and do NOT have to remove the motherboard from the case (can not speak for Intel chips), just takes a little common sense although the thermal grease supplied is pretty bad (like rubber cement).
Anyways after the TX3 was in place my idle temps are now at 22-24 C and at load 36-38 C. I'd say for a $20 cooler that isn't too loud, that's a pretty good result.
Most Recent Customer Reviews
Contrary to a couple of other reviews this CPU cooler fits perfectly into a LGA1150 motherboard with an i5-4590 processor. Read morePublished 6 days ago by GodBlessAmerica
Very very good cooler for my fx-6300, definitely can handle over clocking. I overclocked my chip to roughly 4.2ghz and my idle temp was 23c-25c just using the stock thermal paste. Read morePublished 6 days ago by Amazon Customer
I dunno what the others complain about with the Intel mounting and the pins breaking.. just take your time.. Read morePublished 8 days ago by John Kramer
Good little cpu for sure. At the price it's unbeatable for Am3. Mine did however come with a ton of bent pins. Carefully realigned them until it fit and thankfully it worked.Published 8 days ago by Vatolicious
Keeps my G3258 under 72deg C even at 1.5v. Way outperformed my expectations. I was considering upping the included paste to IC diamond or the like until I saw the temps. Read morePublished 9 days ago by Dubbsjr
Installed on my husbands computer to play games on. Looks nice through the side window of the tower, keeps CPU temps in a good range, and is quite. Read morePublished 12 days ago by Anita
Its a very nice and very functional cooler. I don't have any exact temps, but I live in a hot house in a hot valley in the summer, where it doesn't usually dip below 80°. Read morePublished 13 days ago by Dwizborg
This thing can both suck AND blow at the same time with fans on both sides, and that turns me onPublished 16 days ago by Quartermaster