Other Sellers on Amazon
+ Free Shipping
Intex 77in PureSpa Portable Bubble Massage Spa Set
- Enter your model number to make sure this fits.
- The built-in hard water treatment system makes water gentler on skin for a soothing experience
- An insulated cover and lock is included to minimize heat loss and provides an added safety feature
- PureSpa provides simple maintenance with 2 easy-to-replace filter cartridges for clean refreshing spa water
- Includes: Heating system, 3-way test strip, 2 filter cartridges, floating pool chlorine dispenser, thermal ground cloth, inflation hose, carry bag
- Seating capacity: 4 people; Water capacity: 210 gallons; Water temperature range (68 Degrees - 104 Degrees)
- NOTE: Please read User Manual and Installation Manual before use. Both guides can be found at bottom of this page under the Technical Specification section in Product Information
Frequently bought together
Customers who bought this item also bought
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
From the manufacturer
Each PureSpa includes a Floating Chemical Dispenser and a Replaceable S1 Spa Filter Cartridge for simple maintenance to keep your spa clean and refreshing.
- Built-in hard water system softens the water, making it more refreshing on your skin
- Insulated ground cloth provides enhanced thermal retention
- Insulated cover for improved heating and safety
Intex PureSpa Portable Bubble Massage Spa
The portable Intex PureSpa Bubble Massage Spa allows you to pamper yourself in relaxing, heated water surrounded by soothing bubble jets. The easy-to-use control panel on this garden hot tub activates the 120 high-powered bubble jets surrounding the interior of the spa for a refreshing massage. The built-in hard water treatment system makes water gentler on skin for a soothing experience. The heating system adjusts to fit your personal temperature preference allowing a stress-free spa experience. The Fiber-Tech Construction and the puncture-resistant three-ply laminated material provide the ultimate comfort, support and durability.
The Intex PureSpa Bubble Massage Spa provides simple maintenance with two easy-to-replace filter cartridges for lasting enjoyment for up to four people. An insulated cover and lock is included to minimize heat loss and provide an added safety feature. A carry bag is provided for easy storage and transport. An inflation hose is included for easy inflation.
- Seating Capacity: 4 People
- Water Capacity: 210 Gallons
- Water Temperature Range: 68-104 degrees Fahrenheit
- Approximate Inflated Size: Inner/Outer Diameter: 58"/75" Height: 28"
- Model Number: 28403E
Built-In Hard Water Treatment System
The built-in Hard Water Treatment System makes water gentler on skin, clothes and the entire spa system.
Prevent Hard Water Build Up
Without our hard water treatment system, hard water build up limits water flow and reduces the life of your spa.
Advanced Technology Creates Suspended Crystals
The system generates an electro-magnetic field that agitates calcium and other minerals in the water, causing them to create suspended crystals.
The Included Filter Cartridge Does the Rest
The suspended crystals are then retained in the filter cartridge, leaving soft water in the spa.
|PureSpa 6-Person Bubble Massage Spa||PureSpa 4-Person Bubble Massage Spa|
|Water Capacity||290 gallons||210 gallons|
|Jets||140 Bubble Jets||120 Bubble Jets|
|Heater||1,300W ~ 1°-2°F/hr||1,300W ~ 2°-3°F/hr|
|Flow Rate||460 gal/hour||460 gal/hour|
|Bubble Air Blower||1.1 hp ~ 110-120V||1.1 hp ~ 110-120V|
|Built-In Hard Water Treatment System||✓||✓|
|Chlorine System||Floating chlorine dispenser included||Floating chlorine dispenser included|
|Item Dimensions||28 x 77 x 77 inches|
|Manufacturer Part Number||28403|
|Shipping Weight||104.75 pounds|
Compare to similar items
|Shipping||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping|
|Sold By||Amazon.com||Pool Supply Warehouse||Super buy||VMInnovations||VMInnovations||Windy City SuperStore|
|Item Dimensions||77 x 77 x 28 in||71 x 71 x 26 in||71 x 71 x 28 in||21.5 x 29 x 24 in||20.7 x 22.8 x 33.6 in||24.2 x 34.25 x 20.5 in|
|Item Weight||87.2 lbs||53.86 lbs||50 lbs||73.1 lbs||104.8 lbs||114.4 lbs|
Pamper yourself in relaxing heated water surrounded by soothing bubble jets. The PureSpa provides relaxation at the touch of a button for up to four people. The easy-to-use control panel activates the 120 high-powered bubble jets surrounding the interior of the spa for a refreshing massage. The Fiber-Tech Construction and the puncture-resistant 3-ply laminated material provide the ultimate comfort, support and durability.
Top customer reviews
There was a problem filtering reviews right now. Please try again later.
UPDATE: a week passed and I got my replacement control unit. I had drained the spa....so before I replaced the new control unit...I filled it with my pool water as mentioned earlier. After a few hours it was filled. I replaced the control unit, plugged it in, pushed the power button and presto! A loud beeping noise, all the icons lit up, and nothing working. Reset the control unit numerous times....nothing. Another call to INTEX customer service...phone call answered promptly, and was over in 5 minutes. They will be shipping me a control BASE this time as they think the power supply unit or something electrical in the base is causing the issue. This was yesterday...and I got an email confirmation that my base unit was approved and will be shipped. If all goes well, I will be getting a shipping confirmation today or tomorrow. But then the week wait again...and deciding to empty the spa or not once again. Third time's a charm? We'll see. I have a 90-day return policy with WALM**T...so I will play the game for now and keep my fingers crossed.
UPDATE: been another week and the BASE unit is scheduled to arrive today. Weird thing is that for some reason I decided to reset the spa last night (I kept the water in it)...and the control panel beeped once and started working! I "gently" pushed the heater control up to 100 degrees...and the filter pump turned on. I pushed the bubble button and the thing started bubbling!! I turned off the bubbles and left the thing, checking from my window if it was still lit up every so often. I went outside before bedtime and the temp said 80 degrees. It was still going. This morning I got up, and it had died over the night. Control panel all lit up and unresponsive. What a roller coaster....up and down. I am so anxious for this thing to work. I will hook up the new BASE tonight and give a final do or die update in the next few days. Thumbs up....or back to Walm**t. No more chances with Intex customer support.
UPDATE: BASE unit arrived yesterday and I immediately switched it out with the old one. I also attached the new control panel I received last week. Plugged it in, switched it on and.....everything seems to be working!! The hum from the base is not as loud as the old one, so maybe that's an indication in a positive direction. Water was at 76 degrees...and I set it to 100....which it was this morning when I checked it. Still going. Good. Hopefully this will be my last post. We will give it a try later today.
UPDATE: 5 days later, and everything working well. Tub is great, and it looks as good as it feels. Everyone who sees it wants one. I am keeping my fingers crossed that this will last a few seasons or more.
UPDATE: Been 3 weeks since I hooked up the replacement BASE unit. Everything working fine. Had to clean the filters about 5 days ago, because of an error code indicating the filters needed cleaning/replacement. Last night I had my window open and I heard the spa bubbling. I went outside and sure enough, under the cover, the bubbles were going. Pushed the "bubbles" button numerous times....still going. Pushed the heat button and they stopped. Pushed the heat button again and the bubbles turned on. Now the bubbles go on every time the heat is on. NO GOOD!!! I reset the breaker, etc., and the same problem. I have the original control panel and will hook it up later today, but THREE STRIKES YER OUT!!!. It's only a matter of time this thing will crap out again. GREAT CONCEPT....but poor quality concerning the electronics on this thing. Still have over a month to return to WALM**T....but it looks like when I emtpy it for the winter (or the old control unit doesn't work)...it will be making that "RETURN" trip. COLEMAN just started advertising a spa on Amazon.....I may look into that.
FINAL UPDATE: Hooked up the old original control unit and the same thing. Turn on the heater and the bubbles turn on too. I am so bummed that I am one of the few that isn't having luck with this.....but in the long run, it is probable that the lack of quality concerning the electronics will eventually catch up with a lot of these 5 star reviewers. My spa will be going back to the local Walxxxt in the next few days. Thank heaven for their 90 day return policy. Can't deal with Intex customer service again...even though they will send me new parts....they just crap out.
Ok, Its summer 2015 and Walxxt has it on sale for $329 and free shipping. I must be crazy...but I ordered another one. It is sitting boxed in my garage waiting to be set up. Maybe I will be lucky this time around. It will be set up this weekend and I will post the results. Worst case scenario....another return back to the store. That's the good thing about purchasing it online from Walmxxt....if there is a problem (within return policy), you just bring it back to your local store,,,,no hassle concerning shipping it back to somewhere.
8/10/15: Set up new spa with no problem. (Have had much past experience). Filled with water from hose. Was up to temperature (100 degrees) by the next morning. Been going about 4 days now. Had a BIG pool birthday party for my daughter 2 days ago....kids in and out....many, many people commenting on how cool it is, etc. So far so good. I kept my eye on the kids making sure they didn't push buttons too many times, etc., and was yelling at them if they got too rough. I'm making sure it's babied for a while. Hopefully my over reaction will diminish the longer it keeps going without issues. You would think that Intex would beef up their products since there are so many returns. It costs them an arm and a leg to manufacture and ship out free replacement parts. Using thicker wire or bigger blower/heater would help cut back on most of the problems (In my case its all been electronics). Even if they upped the price $100.
8/27/15: Been going over 3 weeks without issue. Drained it once and refilled with fresh water as the developed a strange smell. Noted in other posts that the rubber/laytex sides will leach out a bit since the product is new. This will go away with time. New water has been in it for 2 weeks and it is still clear without smell. Washed filters out last week and will again soon. Keep a small 1" tab of clorine in the little floatie and test water every 3/4 days. If clorine tests high, i take out floatie for a few days and keep in glass dish by spa. So far so good on this one.
9/21/15: Still working without issue. Did note that those who complained about the sides getting slimey were correct. Even with the chemicals balanced correctly, there is a slight film (rubs off easily) that developes after a period of non-use. Especially on the bottom of the cover pillow that makes contact with the water. Not sure how to correct that problem....but can live with it for now......a quick brushing and its gone.
10/15/15: The spa is still working fine. Getting colder outside, and my pool is covered for the season, so I guess this is a wrap for now. Time to empty it and put it away. Will report back next spring.
February, 2017: Sorry for not getting back sooner! Spa got set up in late Spring of 2016. After inflating and filling with water, turned on the unit and everything lit up correctly. After I pushed the circulation button....nothing. After a few seconds got that familiar beeping noise with the code that indicated pump was not working. Tried a few times.....still nothing. I decided not to panic...and let it sit. After a day or two, I turned on the unit, pushed the circulation button and to my surprise....the pump started working!! Turned on the heater and had no problems at all for the rest of the season. I'm thinking that slight corrosion over the winter prevented the impellers from moving and caused the problem. After sitting for a few days, the water loosened up the impeller. I think. Who knows. At any rate, the spa worked flawlessly for almost 4 months until I packed it away in September. Keeping fingers crossed for next season.
Finale' 8/5/2017: Got it out for 2017 season....everything prepared to inflate it. Control unit turned on and inflated the tub to the correct pressure. Didn't start filling it with water as I didn't have time. Returned later in the day and the damn thing was deflated. Checked everything, hooked back pump and reinflated it. A few hours pass and its soft again. It's out to the curb. Good riddance.
Update: living in California and running the spa 24/7 @ 104 degrees, it has been costing me upwards of $130.00 a month in electricity. I monitored it's consumption using a kill-a-watt.
So I put together a propane powered water heating system and it heats the spa at about 1 degree every 2 or 3 minutes so it only takes about an hour or two to get it up to 104 and costs me pennies. I've attached some photos of it (without the propane tank inside the container). Now I just flick the switch on the front, an LED turns on, pump stars up, heater automatically fires up and the spa starts heating. Couldn't be easier. And now I don't need to run the filter all the time either. Much nicer. In case anyone is interested here is the parts list, all purchased from Amazon except for the 20lb propane and hoses I got at Home Depot all hoses are 3/4" clear so they are barely noticeable going into the spa:
Eccotemp L5 Portable Tankless Water Heater
Flojet 2.9 GPM
Kastar LCD AC Adapter 12V 6A
Bond 67635 Tank Hideaway
30 Amp 12 Volt LED ON-OFF Rocker Switch
20 lb. propane tank