Currently unavailable.
We don't know when or if this item will be back in stock.

Have one to sell? Sell on Amazon

KNACRO A4988 Stepstick Stepper Motor Driver Module + Heat Sink for 3d Printer Reprap


Currently unavailable.
We don't know when or if this item will be back in stock.
  • A4988 surface mount QFN package (ES), the size of 5 mm *5 mm nominal overall package height of 0.90 mm , and with exposed pad for enhanced thermal dissipation. The package is Pb (suffixes-T), with 100% matte tin leadframe plating.
  • A4988 is a complete microstepping motor driver with built-in translator for easy operation. The product can be full, half, 1/4, 1/8 and 1/16 step mode to operate bipolar stepper motor output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator can slow or mixed decay mode.
  • The converter is the key to the easy implementation of the A4988. In inputting one pulse on the STEP input drives the motor one microstep. No phase sequence tables, high frequency control lines, or complex interfaces to programming. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened.
  • Micro-step operation, the chopping control in the A4988 automatically selects the current decay mode (Slow or Mixed). In the mixed decay mode, the device is initially set to fast decay in the part of the fixed off-time, then a slow decay in the rest of the downtime.
  • Mixed-decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry to improve the pulse-width modulation (PWM) power consumption when operating. Internal circuit protection includes: thermal shutdown with hysteresis, undervoltage lockout (UVLO) and crossover current protection. Special power-Sort.

Have a question?

Find answers in product info, Q&As, reviews

Please make sure that you are posting in the form of a question.

Don't see what you're looking for?
There was a problem completing your request. Please try your search again later.
All Product Information Customer Q&A's Customer Reviews

Product description

Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection Automatic current decay mode detection / selection Internal UVLO Mixed with slow current decay modes Synchronous rectification for low power dissipation Crossover-current protection Thermal shutdown circuitry 3.3 and 5 V compatible logic supply Thermal shutdown circuitry Ground Fault Circuit Load short-circuit protection Of five optional step mode: full, 1/2, 1/4, 1/8 and 1/16 Package Included: 1*A4988 StepStick Stepper Motor Diver Module 1*Heat Sink


Product information

Warranty & Support

Product Warranty: For warranty information about this product, please click here

Feedback

If you are a seller for this product, would you like to suggest updates through seller support?
Would you like to tell us about a lower price?

Customer Questions & Answers

Customer Reviews

There are no customer reviews yet.
Share your thoughts with other customers

Pages with related products. See and discover other items: 3d printer power supply