<Update 6.20.2016> I love these units & cannot wait (though I'm going to have to anyway) for the HS200 TP Link Smart Switch (In-wall light switch) to come to the market per their latest software update note under the 'Whats New'.I've had my first TP Link Smart Plug (see the original post below) for about 6 weeks now, my second for about 4 weeks & they are working flawlessly. As mentioned in my OP, I wanted a unit for my entertainment center & have since received & installed it. Drove my college student (who's home for the summer) nuts as the power was not on in the mornings. For the 4 weeks since having the second unit (I called it 'the TV power'), she could not figure out how to get power to the TV. She finally unplugged the power strip from the smart plug & plugged it directly into the wall below the HS100. So I finally showed the family how to work them (mainly just so they wouldn't keep unplugging & plugging in the power chords).On another note, I finally received my Amazon Echo (just in time for Fathers day, wahoo!) and so I now have the Smart Plugs hooked up to the World Wide Web, the Internet super highway, the Internet of Things, etc., etc.I understand the frustrations some people have posted regarding the connection to the Echo & I believe I have figured out why. Amazon's Alexa App is in need of some serious TLC. TP Links Kasa App is doing what it's suppose to do. In my original post, I had a small issue with connectivity of the software to the units which still exists but not near as rough since the latest software update. Still, when you're not connected to your LAN (because you've been away or simply have the WiFi / Data off) & want to adjust something in the schedules or simply turn 'the lamp' on, connecting wirelessly sometimes has a hiccup. Each unit has to ping constantly (every 1.5 to 2 seconds as it was explained to me) to your LAN to let the router know the unit is there. When you connect your phone to the LAN, you may just connect in between those pings in which case the software on the phone may come back & say "There are no connected devices". It does offer a "pre-configured devices" ribbon which you can select to initiate the units connectivity through the smart phone (see the uploaded pics). After selecting the ribbon, you have to select the little plus button on the right of each device until you have the "no unsaved devices" screen, then your units are active for you (5 stars now that I understand the software & realize that most of the frustrations are not the fault of TP Link).After I finally created an account with TP Link (all you need is an email address & a password, no personal information is required) I went back into the Kasa App & set the first unit to remote.In the Alexa App, I had to select the Skills in the menu & do a search for Kasa (there are over 123 PAGES of skills & no file management system in the Alexa App). After getting Kasa as a skill & initiating it, I then had to go to the Smart Home in the menu & select the Kasa skill to find the HS100 Smart Plug. This is where the frustrations started for me. The skill was not there. I know I had found it & selected the skill & initiated it but it was not listed. So I went back to the list & did another search for the Kasa (it's on like page 71 & each time you go into the list, it starts on page 1). After the third time & about an hour plus, I discovered a search box where I could type the name 'Kasa' & search & it would find about half a dozen skills to choose from, duh! What an idiot. Lucky we have the skill's name otherwise it's a page by page search until you find what your looking for. Anyway, I digress. The skill was not showing up in the Alexa's Smart Home directory. I was about to put the phone down & walk away before something got seriously injured when I realized I had a couple updates to finish on my phone. One of these updates was a 34 megabyte update. I've read that if you have a decent size (don't ask me what 'decent size' means, I figured 20 meg or better) update, you should reboot your system after updating. So after my update I rebooted my phone & figured "ok, I'm cooled down a bit, I'll try the Alexa App one more time". Opening the App, I went straight to the Smart Home directory & wha'd'ya'know, the Kasa skill was there. Finally, a step forward. Opening the skill, I can now (finally) have the Kasa skill find the HS100 Smart Plug. Picking the 'find devices' gave me an immediate 'you have no internet connection' message. Then I walked away!This is a long story but I promise it has a happy ending (well, sort of). A few hours of thinking about it I came back to try again. I figured perhaps because the HS100's connect via 2.4 GHz & the Echo connects to the more active 5 GHz, the two are not communicating. So I purposely connected my phone to the 2.4 GHz, opened the Kasa app & verified I could connect to each of my Smart Plugs. Then while leaving the Kasa app open, I went back into the Amazon Alexa app, into the Smart Home directory, & picked the 'find devices' once again. The 'you have no internet connection' message immediately popped up. So I figured the only way I could find the skill to begin with was to reboot the phone so I rebooted once again. I forgot to connect to the 2.4 GHz & open the Kasa app to verify my units were accessible, I just went straight to the Alexa app and after picking the 'find devices' button it came back with a message, 'searching for devices. This can take up to 20 seconds'. Wahoo! It worked, I found my HS100 named "the Lamp". Now there are three ways of turning the Lamp on. I can say "Alexa, turn on the lamp" and Alexa says, "ok" and the lamp comes on. I can push the power button on the front of the unit and the lamp comes on. And I can wait for the scheduled time and the lamp comes on. These units are AWESOME!!!Of course I had set only 'the Lamp' to remote in the Kasa app so I had to go back to the Kasa app & change 'the TV power' to remote so I could find it in the Alexa app. I had to go through rebooting the phone a couple more times to get my second unit connected with the Echo but I am now connected & my college kid is happy to say "Alexa, turn on the TV power" so she can watch a movie instead of getting a summer job, ggrrr!____Original Post____This is a true product review & I paid full price for the TP Link Smart Plug (HS100, no Energy Monitoring) unit. So with that said, let me tell you my current thoughts on this product after playing with it a mere four days.I don't yet have an echo (it's on order) but am preparing for its' arrival. So in the mean time I figured I'd try this on my local LAN before submitting my so called 'Smart' house to the wiles of the internet.The unit itself is easy enough to work with. You can use it as a single outlet power switch & simply push the button to turn it on and off, much like a six outlet power strip with a switch, but this would be a single outlet. But I want a timer control switch that will automatically turn on at a certain time & off at a certain time & I want to (in the future) have that timer & simply override it with a phrase, "Alexa, turn on the lamp". So I needed to connect it to the LAN for starters. After following the instructions for downloading the software (Kasa for Mobile) from Google play I began my assault.My phone automatically connects to my 5 GHz WiFi so I had to manually change it to the 2.4 GHz as this frequency is the only one this Smart plug will work with currently. Reasons are listed on the website (tp-link.us)Now there are two buttons on this unit; a small button on the very top with a light grey gear icon on it is for it's configuration (visibility) when connecting to your phone via the local LAN and the other button in the front just above the outlet is a two tone LED light/power button. This is the button you push to simply turn the power strip on/off. This button flashes orange/green when you first plug it in which tells you it's ready to begin the connection phase.The app found the plug pretty quickly & began asking me the questions needed to control this plug like what to call it (important to name it something unique to the situation). I called it 'the lamp'. What, It's the only lamp in my family room & I don't intend on connecting any other lamps in the house to the Echo so ... 'Alexa, turn on the lamp' will work very nicely. I can go back & change the name of the plug if I need to. The app then asked for the password to my LAN so my phone can connect to the plug. This is where I screwed everything up cause I couldn't remember what the password was. After resetting the plug a couple times (I now know the reset button works) I got the unit setup & the lamp was on.The software, while easy enough to understand is a bit too simplistic in its presentation which leads to a little frustration in finding what you are searching for. Lemme esplain.I wanted the plug as a timer so I needed to get a schedule setup. You need to tap on 'the lamp' on the left side of the apps screen as the right side is the power switch for controlling the plug via phone. Then you have to pic the three little dots to open a menu so you can pic the schedule selection button. I suppose this is necessary cause if you have several plugs, you will need to determine which one you are working with and there are a few options in menu as well.So I set the schedule for an early morning on & mid morning off, Monday thru Friday. Then created a second schedule for Sunset on & late evening off, Monday thru Sunday. Now mind you this is connected to the local LAN which means if you want a current Sunset time, you have to have your phone connected to the unit to get it as the current Sunset changes daily & the unit needs a connection to the Internet to get that time. Duh! No wonder the lamp was coming on early, the Sunset time was current when I programmed it but is now later than when the lamp comes on as my phone is not connected to the LAN to feed the unit the current Sunset time. :-PA bit of a frustration is when you have a cloudy or stormy afternoon & it gets dark well before sunset. So I wanted to override the current setting & turn the lamp on. Well low & behold when I opened the app, it said there were "no current devices configured, would you like to configure one now?" Then a little popup display said "You have had a previous unit configured which you can access after setting up a new device".After several minutes of getting out of the app, going back in, getting out, disconnecting the phone from the LAN, reconnecting, disconnecting, rebooting the phone, reconnecting, I was ready to unplug the unit & plug the lamp into the wall socket. I thought, "All I want to do is turn on the lamp. How lazy am I that I can't reach up and turn the knob, I have to have a 'Smart Plug'." BUT, I wanted the Smart Plug for the timer function. So I was going to Add Device for the fourth time. After picking the Smart Plug icon & giving it a name (the lamp, how original) the app found my previous device & the schedule I was able to turn on the lamp (losing 1 star for this). Haven't had an issue with it since but it's been a mere four days.On another note, I want to comment on others posts regarding this unit.There is a question/post about why it will not turn on a TV. Unless you have one of those old tube style TV's with a manual toggle switch that you can keep in the ON position, this will not turn on a TV. This Smart Plug is designed to simply deliver power to the TV. As I mentioned earlier, in its most basic form this unit is a one outlet power strip, that is all.The specifications of this unit are for a 100-120 Volt AC outlet with a 15amp load maximum. I have not overloaded this unit to see what would happen but my current wiring for my entertainment system (TV, DVD Player, Wii, etc) are all on one six outlet power strip on a 15amp breaker & they have not tripped the breaker yet. With that said, there is a lot of residual power being leaked by these devices while in a dormant state. I plan to order another TP-Link Smart Plug and schedule a time for these devices to receive power so they can be used. They will be off during the night & when I'm away from the home, powered when I am home so I can use them.Another post or two or four mentions this unit is large & covers both wall outlets. While technically this is true, this is also technically not true. This unit has a lip on the back side where the prongs plug into the wall. A standard two prong plug can fit nicely under this unit & both seat perfectly (see the pics I loaded) while anything larger will not. You just have to plug the two prong plug into the bottom outlet first, then plug this unit into the top outlet. In the pics, I have my iClever 6 port charging station plugged into the bottom outlet (need constant power to a charging station) & 'the lamp' via the Smart Plug in the top outlet.