|Item model number||KT-RPWF|
|Operating System||Linux, Windows XP, Windows Vista|
|Item Weight||0.6 ounces|
|Product Dimensions||0.7 x 0.6 x 0.2 inches|
|Item Dimensions L x W x H||0.71 x 0.63 x 0.2 inches|
Kootek Raspberry Pi Wifi Dongle Adapter - 150Mbps Fully Compatible USB Wifi For Raspberry Pi/Windows /Linux/Mac OS
We don't know when or if this item will be back in stock.
- Enter your model number to make sure this fits.
- Fully Compatible Raspberry Pi Wifi Adapter, Chipset: Realtek RTL8188CUS
- Smallest USB Wireless Adapter for Raspberry Pi/Windows XP/Vista/7/8, Mac, Linux
- Standards IEEE 802.11n, backward compatible with 802.11b/g Wi-Fi Certified. Security 64/128 bit WEP Encryption and WPA-PSK, WPA2-PSK security, WPS compatible IEEE 802.1X
- 45 Days Money Back, 2 Years Hassle-free Warranty!
Customers who bought this item also bought
What other items do customers buy after viewing this item?
This Kootek(TM) miniature 802.11b/g/n USB WiFi adapter works right out of the box with popular Raspberry Pi operating systems like Raspbian and RaspBMC. Tested and verified to work with your Raspberry Pi as well as the Beagle Bone. One of the smallest Wi-Fi dongles in the world! It can be powered directly from you Pi.
Raspberry Pi Board NOT INLUDED
Top Customer Reviews
To set up,
1. make sure the RPi is running latest kernel/firmware, use apt-get to do it if necessary.
2. make sure the device is detected, with 'lsusb' command.
3. make sure the RealTek kernel module is loaded, with 'lsmod' command.
4. make sure the 'wlan0' interface is up, with 'ifconfig' command.
5. modify the configuration in /etc/network/interfaces.
Many tutorials show placing the configuration in /etc/wpa_supplicant/wpa_supplicant.conf, it did not work for me.
I had to place 'wpa-ssid' and 'wpa-psk' directly in the /etc/network/interfaces to make it work.
[ 91.151628] usb 1-1.2: new high-speed USB device number 7 using dwc_otg
[ 91.241091] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=8176
[ 91.241117] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 91.241133] usb 1-1.2: Product: 802.11n WLAN Adapter
[ 91.241148] usb 1-1.2: Manufacturer: Realtek
[ 91.241163] usb 1-1.2: SerialNumber: 00e04c000001
[ 91.536895] usbcore: registered new interface driver rtl8192cu
[ 91.579896] rtl8192cu 1-1.2:1.0 wlan1: renamed from wlan0
[ 91.592930] systemd-udevd: renamed network interface wlan0 to wlan1
[ 91.696743] cfg80211: Calling CRDA to update world regulatory domain
[ 92.230971] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 92.231074] cfg80211: World regulatory domain updated:
[ 92.231088] cfg80211: DFS Master region: unset
[ 92.231096] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 92.231111] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 92.231122] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 92.231133] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 92.231143] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 92.231154] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 92.242072] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 104.249743] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Item does not come with a install CD. instead you get directions for downloading updated drivers. no biggy. Also in the description is shows B/G but on back of package it is a B/G/N wi-fi dongle. Its hard to see in the picture. but it is there.
It is not the most powerful dongle. its not made to be more than about 30 feet from router. For me that is perfectly fine. my RPI will be for field use. but won't need wifi in the field, and I'll remove dongle for security reasons. It works.
If you have a Raspberry Pi 2 with Ubuntu, save yourself some frustration and get this dongle. it worked straight out of the box with no drivers to install.
100% plug n' play
As soon as it booted, it already displayed the wifi icon in the task bar, from there, is configurable as it would be in any other OS.
I'm using it for nvidia's gamestream, and it adds up a bit of lag, but it still works for me, mind you, my raspberry is fairly close to my router so there is no reason i dont get good signal to it. Just don't buy this if you plan on using this at more than 10meters from your router, or through several thick walls. It probably won't work. And if it does it will be a low speeds.
I'm rating it 5 stars because is plug and play, and for this price i really can't expect more of what it already offers.
If you are looking for a more reliable and flexible device you should be looking to other(bigger) adapters.
if you need wifi and dont want to break the bank this is very acceptable.