As everybody who has cars knows, people always spend hundreds of even thousands of dollars on their vehicles just because the engine light was on. The easiest way to reset the check engine light and clear any codes is to use a scan tool, which plugs into the OBD2 DLC port, usually somewhere on the driver’s side. Check your owner’s manual for the location. For DIYers, you don’t need to invest in a top-of-the-line scan tool for basic diagnostic functions, our Launch Creader 3001 make DIYers and car enthusiastic repair their vehicle’s problem by themselves.

Why Choose LAUNCH Creader 3001?

• LAUNCH Creader 3001 obd2 scanner Supports O2 Sensor test , EVAP system test, On-Board monitor test, While AD310 and AL319 DOES NOT !

What we did upgrade on LAUNCH Creader 3001 OBD2 scanner on 2020 to make it more perfect?

• Add more car models, Fixed more bugs and upgrade car models up to 2020 new models, including cars, SUVs,minivans,light-duty trucks all over the world. But the year supported may vary on different car makes and models.
• Compared with the old version, LAUNCH Creader 3001 OBD2 scanner can be upgraded and it's lifetime free update.

How to update LAUNCH Creader 3001 car code reader?

1. Connect the scanner with PC by USB cable.
2. Download update software from official website on computer.
3. Click the "Creader Series Setup.exe" and follow the message to install the client software on computer.
4. Hit "Product Update Tool Setup" to update.

LAUNCH Creader 3001 support 7 languages: English, French, German, Spanish, Russian, Italian, Polish.

• Read/Erase Codes: LAUNCH Creader 3001 car diagnostic scanner can show the detailed description of the Diagnostic Trouble Code (DTCs) and turns off Check Engine Light (MIL), clears codes and resets monitors.
• Live Data: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
• I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
• Freeze Frame Data Viewing: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
• On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems. It's a way to find out if the engine has any misfire or compression problems on a particular cylinder, or other data that might indicate a problem but isn’t severe enough to trigger a check engine light.
• Component Test (EVAP Test): Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
• O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
• Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
• Read Vehicle Information (VIN): Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Obviously, LAUNCH Creader 3001 is 2021 cost-effective OBD2 scanner you always dream of !