|Item Weight||1 pounds|
|Product Dimensions||2 x 2 x 12 inches|
|Item model number||LN903|
|Item Package Quantity||1|
Other Sellers on Amazon
+ Free Shipping
+ $4.94 shipping
+ Free Shipping
Liquid Nails LN903 10-Ounce Heavy-Duty Liquid Nails Construction Adhesive
|Price:||$6.78 & FREE Shipping|
Frequently Bought Together
Customers Who Bought This Item Also Bought
From the Manufacturer
Top Customer Reviews
(1) Titebond II wood glue,
(2) Liquid Nails Heavy Duty and
(3) Loctite Wood 510
I glued together 2 cedar wood samples using each glue. The wood samples were 2 inch x 3 inch and I clamped them together using a brick as a simple weight on top. I let them dry for 3 days.
All 3 glues held STRONG after they dried... I could not pull them apart with my hands.
All these glues are GOOD for DRY use.
The Rain Test:
Then I put the samples outside and soaked them with water 3 days...I hit them 3 times a day with a low pressure garden hose.
On day 6, I did my basic pull test... using my hands.
(1) Titebond II : VERY GOOD. Held very well...I could NOT pry them apart with my hands.
(2) Loctite Wood 510 : POOR. Snapped apart easily when I pulled them apart with my fingers.
(3) Liquid Nails Heavy Duty: WORST. Fell apart...No resistance at all when I pulled them apart.
Conclusion : TITEBOND II is the ONLY GLUE that I will use for wood that gets WET !
Sorry ... but the test proved it....
Part of the issue is that this is Low VOC, and feels like latex caulk. It just doesn't hold up.
Also, it doesn't seem to fully cure. I was able to peel off some excess by hand after curing a week. It is still pliable, and can be torn and re-stuck to itself.
I looked it up on the manufacturer's website, and it says:
exterior and interior heavy duty applications including countertops, cabinets, brick veneer, plywood and waferboard, foil insulation board, tileboard, treated lumber, drywall and most common building materials (concrete, lumber, etc.).
NOT Recommended For:
flooring applications, ceramics, mirrors, granite, marble, plastic, vinyl or ceiling tile.
Using a 1/4" (.64 cm) bead: 28 fl. oz. cartridge covers 88 lineal ft.
Using a 1/4" (.64 cm) bead: 10 fl. oz. cartridge covers 30 lineal ft.
1 Gal. can covers 60 to 90 sq. ft.
1 Quart can covers 15 to 22 sq. ft.
ALL HAS CHANGED AND THIS IS NOT THE LIQUID NAILS OF THE PAST, YOU ARE BETTER OFF WITH ELMERS GLUE OR TOOTHPASTE. !!!
I HAVE HAD GOOD LUCK WITH LOCKTITE PRO LINE, A BIT LOOSER THAN L. N. BUT SEEMS TO HAVE THE SAME STRENGTH AND HOLDING POWER AS THE OLD LIQUID NAILS.
After waiting 24 hours it didn't bond. While scraping it off it dawned on me that the " Heavy duty adhesive" was in fact acrylic caulk. It must have been a control mistake at the factory . The other project was installing garage door seal which did not adhere properly. The adhesive was once again caulk.
That's it for me I won't recommend it!
Most Recent Customer Reviews
This is some good stuff! I used it to connect my outdoor dryer vent cover to brick figuring I'd give it a try, but not expecting much. Read morePublished 8 days ago by 3L33T
Great .... an excellent adhesive. Used it on concrete and it worked perfectlyPublished 11 days ago by Aleesha Patterson
These liquid nails are very liquid. Very heavy. Very duty. Highly approved.Published 18 days ago by HoustonNative
The new water based product is crap! I will not buy it again or recommend it. It is useless, doesn't bond to anything. I'm looking for a replacement product.Published 1 month ago by Joseph W. Smaltz
Liquid Nails is always amazing! I used this to glue up faux ceiling tiles and panel board. Top: read the directions and wait 10 mins before trying to glue up as this will allow a... Read morePublished 1 month ago by Cindy Sanders
Tiny amount -- I really needed five tubes. Could not complete the project.
I guess it works, but I had to go to HD to buy more.