|Item Weight||8 pounds|
|Product Dimensions||22 x 13.25 x 9 inches|
|Item model number||TV40-001H-S|
|Manufacturer Part Number||TV40-001H-S|
|OEM Part Number||TV40-001H-S|
|Cover Included||MORryde TV40-001H-S Slide-Out and Swivel TV Base Mount - Short|
Other Sellers on Amazon
+ Free Shipping
+ Free Shipping
+ Free Shipping
MOR/ryde - TV40-001H-S TV40001HS Short Slide-Out and Swivel TV Base Mount
Enhance your purchase
|Movement Type||Swivel, Tilt|
|Maximum Tilt Angle||30 Degrees|
Buy it with
Compare with similar items
MORryde TV40-001H Slide-Out and Swivel TV Base Mount
MOR/ryde 111.2016 MORryde TV40-002H Horizontal Sliding TV Mount - Adjustable Depth , Black
VIVO Manual Flip Down Ceiling Mount for 13 to 27 inch Flat Screens, Folding Tilt Pitched Roof and Under Cabinet Mounting for LCD TV and Monitors, MOUNT-M-FD27
MORryde TV40-010H Slide-Out and Flip Down TV Ceiling Mount
|Sold By||Amazon.com||Amazon.com||Amazon.com||V I V O||RevPlanet|
|Item Dimensions||22 x 13.25 x 9 inches||22 x 13.25 x 9 inches||32 x 46 x 8.5 inches||12 x 3.8 x 5 inches||22 x 13.25 x 9 inches|
|Mounting Type||Swivel||swivel, tilt||extend, swivel, pivot||Wall||swivel, pivot|
Have a question?
Find answers in product info, Q&As, reviews
Your question might be answered by sellers, manufacturers, or customers who bought this product.
Please make sure that you are posting in the form of a question.
Please enter a question.
MORryde TV40-001H-S Slide-Out and Swivel TV Base Mount - Short. Designed to slide-out and swivel, this bracket is perfect for installation in a cabinet or corner. When ready to watch TV you simply release the lock allowing the TV to slide forward a full seven inches and then swivel and tilt to your desired viewing angle.
Reviews with images
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
The problems. Poor shipping/packing. Although the package arrived damaged I don't believe this caused the underlying problems. The unit was bent in several places, I put it in my vise and straightened everything out. All the bolts were loose, including the ones that held in the guide bearings, so the arm that slides out was not properly held in place. It wiggled and rattled. When I tried to tighten the bearing bolts I found out they used the wrong fasteners and tightening the bolts caused them to capture both the inner and outer race which locked the bearing in place so it wouldn't turn. Luckily I have a pretty complete shop and I was able to find some appropriately sized washers so tightening the bolts only captured the inner race and the bearing would turn. It addition to the bearings there are plastic glides to hold the moveable arm in place from side to side. They were installed backwards, from the outside in instead of the inside out. When I fixed this the moveable arm would not fit through its opening, the tube was bent in at one end. Back to the vise for some more unbending. After all the modifications and installation the mount works as advertised, but I thought I was buying a finished product, not a "kit" that required the user to work on it before use.
By Diana K. on July 19, 2020
12” was to small for me even though I went all the way up on the adjustment and the 17” would be too tall even with the adjustment all the way down. (Just for my application 2008 National RV overhead TV) I ended up stacking plywood and gluing and clamping and drilling holes to make up a spacer. Worked perfect. But all in all the product is just want I need. It is strong works great so far.
As someone mentioned it would be nice to have a spring on the lever to make sure that the bar you lift up does not pop out on a bump or ???? it would be nice to have some tension on the bar that is meant to lock the TV into position. Next model should have this. Still 5 star product.