MYNT3D Professional Printing 3D Pen with OLED Display
Fulfillment by Amazon (FBA) is a service we offer sellers that lets them store their products in Amazon's fulfillment centers, and we directly pack, ship, and provide customer service for these products. Something we hope you'll especially enjoy: FBA items qualify for FREE Shipping and Amazon Prime.
If you're a seller, Fulfillment by Amazon can help you increase your sales. We invite you to learn more about Fulfillment by Amazon .
Specifications for this item
Frequently bought together
Customers who bought this item also bought
MYNT3D Professional 3D Printing Pen
Fast, Slow, and Anywhere in Between
Works with Nearly Any 1.75mm Filament Under the Sun
ABS: 210° C
PLA: 175° C
All other plastics: Reduce temperature relative to recommendations for 3D printers.
But wait, there's more
Ergonomic shape keeps the controls always within reach and let's you manuever the pen in ways that would be impossible for a larger design.
The MYNT3D Pen is USB powered so that it can be used with battery power banks (with at least 2A output). Take your projects outside or on the go!
A temperature mistake with another pen could send it straight to the garbage. With MYNT3D we've got your back with a modular nozzle design that can be replaced in a matter of minutes.
Would you like to tell us about a lower price?
Top customer reviews
I chose this pen for that it has a door that opens and replaceable tip. I also liked that it could use ABS and PLA. I bought a box of SketchPro PLA filaments to go with it. I knew I did not want to smell plastic while snowed in. It worked great with the PLA also.
This is my first 3D pen.
The temperature goes to 230 C plus a little, which is more than enough for the type of filament I bought.
The PLA worked fine in this pen. The recommended temperature is 190-230 C.
I used the black PLA and made some dollhouse windows. I was aiming for gates but think 3mm type pen would be better for gates.
I pulled the short piece out instead of trying to feed every last inch. I was not sure if it would feed the last piece. The motor backs it out only if it has something to back out. In other words if no filament is in it, motor won't continue to run.
The seller emailed me and assured me, if I need technical support to contact them.
The directions are brief but the pen is simple and intuitive.
The website sells extra tips and ABS for the pens.
I noticed as I used the roll of black, that it got a little easier to control the pla.
If you are an artist and draw a lot, you will pull up on the pen to look at what you are doing.
This pulling up action will draw a long thin pla line in the air, as it should.
The pen is a bit clumsy but turning the work around with the other hand helps keep my eye on the line.
The PLA is 1.75 mm. It is best to keep that in mind, while choosing what to draw. It is somewhat difficult to get tiny curls and leaves when working on miniature projects.
It does draw a pretty thin line if you get the speed just right.
My PLA filament won't come out at the slowest speed. I tried different speeds to get a feel for what will work for me and my drawing style.
The PLA stuck to the paper. But I wet it and rubbed it off.
There was some shrinkage, which was evident by the paper buckling a little.
The PLA has a little flexibility, which makes it easy to straighten later.
The pen is fun to play around with.
I did not notice any noise.
The pen turns off when no activity is detected for a few minutes. I remove my filament if I am walking away from it.
The pen has not jammed at all and I have used over 7 meters of PLA in it so far.
The only thing that bothers me is the length of the power cord. You need an extension cord or a Co veniently placed power plug/workstation. Other than that, it's been a hit so far.