|Item Weight||10.3 pounds|
|Product Dimensions||5.6 x 16.9 x 13 inches|
|Item model number||XPH102|
|Batteries||1 Lithium ion batteries required. (included)|
|Item Package Quantity||1|
|Included Components||18V LXT 1/2" Hammer Driver-Drill (XPH10Z), 18V LXT Lithium-Ion 3.0Ah Battery (BL1830), 18V Lithium-Ion Rapid Optimum Charger (DC18RC), Tool Case|
|Battery Cell Type||Lithium Ion|
Makita XPH102 18V LXT Lithium-Ion Cordless 1/2" Hammer Driver-Drill Kit (3.0Ah) (Discontinued by Manufacturer)
We don't know when or if this item will be back in stock.
- Enter your model number to make sure this fits.
- Makita-built 4-pole motor delivers 480 in.Lbs. Of max torque
- Variable 2-speed design (0-600 & 0-1,900 RPM) (0-9,000 & 0-28,500 BPM) for a wide range of drilling, driving and hammer applications
- Features extreme protection technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions
- Compact and ergonomic design at only 7-3/4" long
- Weighs only 3.9 lbs. With battery for reduced operator fatigue
There is a newer model of this item:
Customers who bought this item also bought
Customers who viewed this item also viewed
Customers also shopped for
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
From the manufacturer
Makita XPH102 18V LXT Lithium-Ion Cordless 1/2" Hammer Driver-Drill Kit (3.0Ah)
- Rubberized soft grip provides increased comfort on the job
- Built-in dual L.E.D. lights illuminate the work area for greater productivity in low-light applications
- All metal gear construction provides increased durability
- Reversible belt clip attaches to either side of the tool
- Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
- Only use genuine Makita batteries and chargers
- *compared to XPH01Z
Makita XPH102 18V LXT Lithium-Ion Cordless 1/2" Hammer Driver-Drill Kit (3.0Ah)
More Compact and 26% More RPM*
The Makita 18V LXT Lithium-Ion Cordless 1/2-inch Hammer Driver-Drill combines speed and torque in a compact size, with an efficient lithium-ion battery that reaches a full charge in only 30 minutes. For increased versatility, it can be run as a driver-drill or a hammer driver-drill, and is engineered for applications in wood, metal, masonry, and concrete.
The Makita-built four-pole motor delivers 480 in.lbs. of Max Torque and up to 1,900 RPM and 28,500 BPM in the high-speed setting. With Extreme Protection Technology (XPT), the drill is engineered for increased dust and water resistance and is ideal for use in harsh job site conditions.
It’s part of Makita’s expanding 18V Lithium-Ion series, the world’s largest cordless tool line-up powered by an 18V Lithium-Ion slide-style battery. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
- 18V LXT 1/2" Hammer Driver-Drill (XPH10Z)
- 18V LXT Lithium-Ion 3.0Ah Battery (BL1830)
- 18V Lithium-Ion Rapid Optimum Charger (DC18RC)
- Tool Case
Star Protection Computer Controls to protect against overloading, over-discharging and over-heating with battery and tool.
Star Protection Technology
Up To 2 Times More Work
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
Every Makita Lithium-Ion Power Tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita Lithium-Ion tool within 30 days of purchase, return it and Makita will provide, at Makita’s option, a replacement or refund. Each Makita Lithium-Ion Power Tool, Battery and Charger is warranted to be free of defects from workmanship and materials for the period of Three Years from the date of original purchase. Should any trouble develop during the three-year period for the Lithium-Ion Power Tool, Battery and/or Charger, return the Complete Power Tool, Battery and/or Charger, freight prepaid, to one of Makita's Factory or Authorized Service Centers.
If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This limited warranty does not apply to Makita Accessories.
This limited warranty does not apply where:
- Repairs have been made or attempted by others.
- Repairs are required because of normal wear and tear.
- The Power Tool, Battery or Charger has been abused, misused or improperly maintained.
- Alterations have been made to the Power Tool, Battery or Charger.
- The Power Tool or Charger has been used with a non-genuine or 'knockoff' battery.
In no event shall Makita be liable for (a) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold hereunder, or (b) any amount in excess of the amount actually paid to Makita for the products sold here under for any liability arising from the sale or use of the products sold hereunder. This limitation applies both during and after the terms of the warranty.
Makita disclaims liability for any implied warranties, including implied warranties of 'merchantability' and 'fitness for a specific purpose', after the three-year term of this limited warranty.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
Compare with similar items
Makita XPH12Z 18V LXT Lithium-Ion Brushless Cordless 1/2" Hammer Driver-Drill, Tool Only
Makita XPH07M 18V LXT Lithium-Ion Brushless Cordless 1/2-Inch Hammer Driver-Drill Kit (Discontinued by Manufacturer)
Makita XPH01RW 18V LXT Lithium-Ion Compact Cordless 1/2" Hammer Driver-Drill Kit (2.0Ah) (Discontinued by Manufacturer)
Makita XPH07Z LXT Lithium Ion Brushless Cordless Hammer Driver Drill with Tool , 1/2-Inch
Makita PH04R1 12V Max CXT Lithium-Ion Cordless Hammer Driver-Drill Kit, 3/8"
|Shipping||—||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping|
|Sold By||—||Amazon.com||Neandertool||Nationwide Tool||Amazon.com||Amazon.com|
|Included Components||18V LXT 1/2" Hammer Driver-Drill (XPH10Z), 18V LXT Lithium-Ion 3.0Ah Battery (BL1830), 18V Lithium-Ion Rapid Optimum Charger (DC18RC), Tool Case||Tool only (battery and charger not included)||Bare-Tool||Bare-Tool||Bare-Tool||(2) 12V max CXT Lithium-Ion batteries, charger and tool case|
|Item Dimensions||16.9 x 5.6 x 13 in||7.8 x 3.6 x 9.5 in||6 x 20 x 15 in||5 x 17 x 10 in||6 x 15 x 11 in||12 x 7.8 x 14.5 in|
|Voltage||18 volts||18 volts||18 volts||18 volts||18 volts||12 volts|
The Makita 18V LXT Lithium-Ion cordless 1/2-inch hammer driver-drill combines speed and torque in a compact size, with an efficient Lithium-Ion battery that reaches a full charge in only 30 minutes. For increased versatility, it can be run as a driver-drill or a hammer driver-drill, and is engineered for applications in wood, metal, masonry, and concrete. The Makita-built four-pole motor delivers 480 in.Lbs. Of max torque and up to 1,900 RPM and 28,500 BPM in the high-speed setting. With extreme protection technology (XPT), the drill is engineered for increased dust and water resistance and is ideal for use in harsh job site conditions.
Top customer reviews
There was a problem filtering reviews right now. Please try again later.
One of the jobs I attempted with this drill was to install a large gun cabinet in my house; this required drilling four 1/2" holes 5" deep into the concrete foundation. After twenty minutes and three battery changes I had only completed 1 of the 4 holes (just FYI, I had a new Bosch masonry bit... so I can't blame the drill bit). One of the claims of this hammer/driver is "[it is] engineered for applications in wood, metal, masonry, and concrete" - my experience is that this is last part is NOT true. Most of us buying this drill are not going to use it to drill into concrete (because, let's be honest, it's not designed for that), so come on Makita, don't BS us.
Overall, this is a great drill for $99.
I was a little reluctant purchasing this model. It is actually China made, it feels a little shaky and the drive sounds like the gearing doesn't mesh.
Being a high voltage, it does have some power and torque. The hammer feature comes in handy, in not having to switch tools when using carbide bits in masonry.
I don't care for the flashy 'Transformer' appearance. The tool gets dirty, I like to keep them clean, and all those little rubber protrusions make it hard to clean. The battery charger seems like a showy, over kill for its purpose. The carrying case is more of waste of the overall cost, than its worth. Even when it's unlatched, it annoying just to lift the lid, especially when you're holding the drill.
Well, I had to buy this one to check it out, as I have many others. If I find something worth, I'll purchase a number of them. But not this one.
Battery lasts a decent amount of time, I am sure there are bigger batteries for it but would be heavier so this works just fine. drilled out about 2 holes in the 9 pieces I needed and still had life.
only complaint would be it is a bit heavy but with how hard it works I can only assume that to be normal.