Masterbuilt 20050211 Black Propane Smoker, 40-Inch
- Enter your model number to make sure this fits.
- Black Powder-coated outer shell with 4 interior smoking racks
- Stainless steel burner with porcelain flame disk bowl
- Gas control valve and spark igniter with Type 1 regulator and hose
- Smoke stack
- Temperature gauge.Heating element:15,400 BTU stainless steel burner
What other items do customers buy after viewing this item?
Customers who viewed this item also viewed
Customers who bought this item also bought
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
From the manufacturer
Masterbuilt GS40 Black Propane Smoker, 40-Inch
The Masterbuilt XL Propane Smoker is a workhorse, with plenty of room to smoke all of your favorite foods. With easy push-button ignition and gas controls, Masterbuilt has made smoking simple.
- Four chrome-coated smoking racks.
- 15,400 BTU stainless steel burner.
- Push-button ignition.
- Legs add height for easy access.
- Adjustable air damper for smoke control.
- Water bowl for adding moisture and flavor.
- Removable wood chip tray for easy ash removal.
- Built-in temperature gauge.
- Type 1 regulator and hose.
The rich, full flavor of slow-cooked food has been a staple of outdoor cookouts. The Masterbuilt 40-inch Extra Large Vertical Gas Smoker delivers smokehouse flavor as easy as grilling! This gas smoker makes adding woods chips or water easy and with minimal heat loss allowing you to have as much or as little smoky flavor you would like for your foods. This extra large smoker has over 1,300 square inches of total cooking space on four chrome cooking racks. This smoker also has 15,400 BTU’s with a stainless steel burner. With its convenient, built-in temperature gauge right in the door, you will always know the temperature of your food while it still cooks. The locking door design helps to keep the heat and smoky flavor inside. The push-button ignition makes start up easy. Whether you’re cooking pork, chicken, beef or seafood, the delightfully smoky aroma that permeates from the Masterbuilt 40-inch Extra Large Vertical Gas Smoker has a way of making friends and family flock around the smoker in the spirit of good times and good food!
Top customer reviews
There was a problem filtering reviews right now. Please try again later.
Now go out there and start smoking!! Have fun !!
I want to move the smoker in between uses and there was no easy way to do it. So I added some simple swivel wheels. The legs didn't seem as stable as I would have liked while rolling it around so I had to reinforce them. I got some metal cut and fitted the pieces in between the legs. Then I spray painted the metal panels black, predrilled holes in the legs and secured them with rivets. The metal panels also helps with controlling the flame when it's windy outside. In my opinion this is how the smoker should come from the factory. I noticed other people build brick wind barriers but I wanted a more elegant solution. Check out my pictures.
On the tray for the wood chips, I added lava rock. It took me several smoking sessions to find the right amount. For me, a single layer of small sized lava rocks worked best. For wood, I bought chunks but I chop them into chips about the size of a stick of gum, and the thickness of a smart phone. Anything bigger gave me too many tempature spikes.
Some people feel that the door leaks too much smoke and installed a gasket. I didn't need to do this with mine. It does allow smoke to escape but it isn't enough to be a problem. The door latch is adjustable, so I think a simple tightening of it is all you need.
I opted against "bullet" style smokers because only one rack is accessible without a lot of trouble. The Weber Smokey Mountains are supposed to be great, but they start at about $300. The Brinkmann Smoke 'N Grill I had for a while was such a piece of crap that I finally gave up trying to "fix" it, and sold it for $15 at a yard sale (and still was cheating the guy at that price.) Horizontal cookers hold a lot of meat, but it's notoriously difficult to control an even temperature in one unless you fabricate a reversing plate; they also take up a lot of space when not being used.
So I started investigating vertical cabinet-style smokers. The Char-Broil CB600X was tempting because I could buy one from the distributor here, already assembled, for only $100 (a savings of about $70.) However, it just seemed so cheaply made that I didn't want to deal with its many reported problems: leaking, bad thermometers, peeling paint, and a combination chip and water dish that everyone seems to hate. Also, every Char-Broil grill I've ever owned has rusted out in only two seasons.
I rejected WalMart's Great Outdoors smoker because it has only one door; tending the chips or water means you'll probably spend 30 minutes or more before the cooking area gets back up to temperature. Their Brinkmann Split-Door Smoker solves that problem, plus it costs a mere $74; many people online like the results they get with a Brinkmann after EXTENSIVE modifications, but I was looking for a smoker, not a hobby (plus it was out of stock.)
That left Lowe's "Master Forge" and the Home Depot "MasterBuilt Pro" (which was also at Sears for a similar price.)
The two are very similar in both appearance and features. Both smokers have a good amount of room for cooking on four 14x14-inch pull-out racks, room enough for several butts or racks of ribs, with all the meat easily accessible at the same time. They each have separate doors for tending the chip pan and water pan, so that you don't have to open the cooking chamber and let the heat and smoke out, and pushbutton electronic igniters for the propane. I don't expect to use anything but propane, but both the MasterBuilt Pro and the Master Forge smokers can also be used with charcoal. (Although some folks swear by charcoal, if you're doing things right, the only thing the charcoal provides is the heat; the flavor should come from the wood chips you use. Still it's nice to have the option. Electric can work well, but isn't convenient for tailgating, and just seems wrong somehow.)
The Lowe's Master Forge was a little less expensive at $169 (as of summer 2012, the very similar $149 propane-only #DGY784CP, although still shown on the Lowe's website, has been discontinued.) It has a shelf that folds down on the left side, but I'm not sure how handy that shelf would end up being, because it's blocked when the door is open. It also has a top-mounted smoke stack with a variable control, as compared to the simple sliding vent on the back of the MasterBuilt Pro; this might prove an advantage in windy or rainy conditions. Then again, without a smoke stack, the entire top of the MasterBuilt is available to set things on, as long as they can stand the heat.
However, unlike the Lowe's smoker, the MasterBuilt has insulated doors, which seem to make it hold the temperature a bit better than what I've read about the Master Forge. On mine, the temperature stays within about 10 degrees of the 220 I set it at unless I forget and let the water pan dry out (higher temps are definitely possible; I got it to about 450 while seasoning it.) The door latches are smaller and pull the door in a little tighter on the Masterbuilt, and are less likely to get bumped as you walk by, unlike the protruding handles on the Master Forge. Finally, the MasterBuilt has wheels on the two back legs, which would come in handy if you need to move it before it's cooled off. Neither smoker is really heavy (50 pounds, maybe) and the Master Forge has insulated handles, but I wouldn't want to try carrying it around while it's still hot.
Many smokers in this price range leak so badly that you have to install some type of gasket around the doors to prevent loss of heat and smoke. I had planned to go ahead and buy an oven gasket when I bought the smoker, but I forgot to do so. As it turns out, it leaks so little that a gasket won't be necessary. I also won't have to replace the stock thermometer, which (at least on mine) turned out to be only about 10 degrees off, much better than many I've read about. (I calibrated it by testing it in some boiling water before I installed it in the door. That 10-degree fault may not be consistent for every temperature, but 212 degrees is close enough to the temperature I'll use for smoking that this thermometer will do just fine.)
Assembly of the MasterBuilt was very straightforward, with clear and concise English instructions (Spanish was in a separate manual) and neatly packaged parts and hardware. It took me about an hour to put it together, and it probably would have been less had I not been watching TV at the same time. I left off an arm that bolts onto the left side to stabilize your propane bottle; it seemed unnecessary to me, and the arm would certainly get in the way when I store the cooker in the garage.
Overall, after using it several times, I am very pleased with my MasterBuilt Pro. It cost about $10 more than the Lowe's "Master Forge," but I didn't have to spend $20-$30 on a gasket and new thermometer as I had expected (plus Home Depot even honored the 10% off coupon I had for Lowe's!) Furthermore, I haven't had to make any tedious other modifications to get it to work. It holds the temperature quite well while using fuel sparingly, about 24 hours on a tank. On longer cooks, I'll probably replace the stock water pan (which is a little too small) with a $1 aluminum pan just for the extra volume. But the only other change I plan is to add a beer opener to the side, and with that in place I expect to get many years of enjoyment out of this smoker.
A couple of times this spring I decided to try firing the unit with charcoal rather than propane (despite my earlier comment about flavor coming from the wood chunks and charcoal providing only heat, there really DOES seem to be a little "something" missing in the propane-fired meat's flavor.) Lighting it was really easy: I just piled the pan full of lump charcoal and hickory chunks, and lit the propane underneath for a few minutes. I used more charcoal than I expected (almost a whole bag over eight hours) but that may have been because of the small size of many of the pieces in what I was using. I also had to replace the water more often, but I guess that's to be expected since the heat is a couple inches closer. I does seem to be a little harder to keep the temperature at 250 using only charcoal; it wanted to hover around 200-220 degrees, and was very slow to recover after any time I opened the door. Kicking the propane back on for a few minutes seemed to help though, and in the future I may try running the propane continuously at a very low setting in addition to the charcoal. Overall, my results were still good though, and using the smoker with charcoal involved only a little more attention than propane only.
Most recent customer reviews
the only issue with it was when he unpacked it and took it out of the box one of...Read more
Controls are super-simple, and it does a fine job maintaining temperature with minimal tweaking.Read more