Other Sellers on Amazon
+ Free Shipping
+ Free Shipping
+ Free Shipping
Maxpedition Micro Pocket Organizer
|Price:||$16.09 & FREE Shipping on orders over $25. Details|
- Enter your model number to make sure this fits.
- Main compartment: 3.5"(L) x 1"(W) x 5.5"(H)
- Fits the iPhone 6
- 800-Denier water and abrasion resistant light-weight ballistic nylon fabric
- Teflon fabric protector for grime resistance and easy maintenance
- Triple polyurethane coated for water resistance
Frequently bought together
Customers who bought this item also bought
Maxpedition Micro Pocket Organiser - Small EDC organizer fits easily and comfortably into pants pocket. Overall dimensions: 3.5" wide x 5.5" high x 1" deep (8.89cm wide x 13.97cm high x 2.54cm deep) Exterior front: Mesh slip pocket Exterior back: 3/4" webbing grab handle, box-and-X stitched Interior left: Slip pocket with 1" wide elastic with 3 divisions 1" - 1" - 1" Interior right: Slip pocket with 1" wide elastic with 2 divisions 1.5" - 1.5"& tie down loop Product Materials 800-Denier water and abrasion resistant light-weight ballistic nylon fabric Teflon fabric protector for grime resistance and easy maintenance high strength zippers and zipper tracks Triple polyurethane coated for water resistance High tensile strength nylon webbing High tensile strength composite nylon thread (stronger than ordinary industry standard nylon thread) Internal seams taped and finished Paracord zipper pulls Stress points double stitched, Bartacked or "Box-and-X" stitched for added strength
Amazon Instant Video
800-Denier water and abrasion resistant light-weight ballistic nylon fabric
Teflon™ fabric protector for grime resistance and easy maintenance
YKK high strength zippers and zipper tracks
Triple polyurethane coated for water resistance
High tensile strength nylon webbing
High tensile strength composite nylon thread (stronger than ordinary industry standard nylon thread)
Internal seams taped and finished
Paracord zipper pulls
Stress points double stitched, Bartacked or "Box-and-X" stitched for added strength
Top Customer Reviews
Hard Use Gear! Haha good one.
Note that there is no attachment method on the back. Just a carry strap at the top. No Molle straps, no belt loop or clip. It is designed to be in a pocket. If it was on your belt and you opened it, its contents might fall out.
It is small, but at the same time, it is not. It is small enough to fit in a pocket, unless you pack it full of items, or you have small pockets. However, it is large enough to store several items.
It is truly a pocket organizer, holding all those small items you would otherwise stuff in several pockets.
Here's what I have in mine:
Outer mesh pocket:
• PaperMate Inkjoy pen (shortened)
• Whistle buckle
• Sewing kit
• Folding scissors
• Nail-clipper through tab at top
• USB flashdrive
• Olfa Carton Cutter
• Pocket Wrench II
• Ziplock bag with alcohol wipes, Band-aid strips, paper clips, twisty ties, safety pins, two split rings, fresnel lens
• Paper with two binder clips
• 6 piece tamper-proof Torx bit set
• Hex bit adapter for Leatherman Rebar
• Zip ties pushed through rim seams (11.5" by 1/8")
(the zip tie head is a perfect tight fit for the square side of the adapter. It keeps the adapter in place securely with no fear of it falling out)
• AmPro Precision screw driver set (4mm bits x10)
• Coast G19
• Leatherman Rebar
• Mini Bic lighter attached to loop at top (secured with rubber band)
• Mini zip ties in drinking straw
• Hair band attached to lighter
• Gorilla tape, common tape, and nano cord wrapped around plastic card
There is only one strap on each side. This means that if a small item occupies a spot, there is no way to attach other items below. If it had two straps on the left, you could secure several small items, like a battery, chapstick, pill fob etc. As it is, you have to either have space unused, or have small items in but not attached to anything. Ideally, it would have a strap tab at the bottom of the right side, to accommodate a small item horizontally below other longer items.
I am very happy with it, but would like to see a redesign of this, with two straps on the left, and a strap tab at the bottom of the right side.
Note: When it arrives, the paracord zipper pull will be tied in a simple knot using both ends. This is rather weak. I have included a guide for another knot. It will not come loose on its own, only if you deliberately untie it. It also keeps the paracord in an open loop, to easily put a finger through and open or close it.
If you get the tan one, there might be tan thread visible along the black mesh outside. I blackened it with a sharpie and it makes it look much better.
Contents as they are in and out of the pouch.
You can push thin zip ties through rim seams inside.
I also include a guide for the zipper pull knot I did.
As others have said a belt loop/webbing on the back would be a huge improvement. The loop on the top is still good enough to throw on a carabiner, etc. if you need empty pockets for a bit.
My old regular sized organizer was far too big to fit in ACU shoulder pouches. The Micro slides right into the ACU shoulder pouch. With the new OCP uniform, the shoulder pouch is smaller due to a zipper but the Micro will still fit if you do not overpack it. It will also fit snugly in the small pocket above the boot (though I would not want to put it there). Fully packed, my micro is about as thick as my old organizer empty which is neat.
The materials are somewhat spartan but I'm sure maxpedition did that to minimize thickness which is good in my book
Had a fishy scent initially, im sure that will go away in time. Solid little organizer. Would definitely buy again. Would highly reccomend for Military Personnel.
I uploaded a pic of mine.