|Item Weight||7 ounces|
|Product Dimensions||4 x 3.8 x 3.8 inches|
|Item model number||C2100|
|Manufacturer Part Number||C2100|
|OEM Part Number||C2100|
Other Sellers on Amazon
+ Free Shipping
+ $4.95 shipping
Meguiar's C-2100 Professional Detailing Clay, Aggressive
|Price:||$22.76 & FREE Shipping on orders over $49. Details|
- Enter your model number to make sure this fits.
- Quickly removes all bonded contaminants
- Restores smooth as glass finish
- 100% non-abrasive and safe on all types of paint
- Clear coat safe
- Safe on all types of paint
- 100 percent non-abrasive and safe on all types of paint
Frequently Bought Together
Customers Who Bought This Item Also Bought
CAUTION: Keep out of reach of children.
Customers Who Viewed This Item Also Viewed
Top Customer Reviews
As a starter, clay is meant to remove bonded contaminants thereby giving you a smooth surface upon with to then polish and then wax. You know you car will benefit from claying by this simple test: Wash and dry it completely and then run your dry hand over the surface. If it's not smooth as glass there are contaminants boned to the surface that have to be removed if you want very high quality results from your detailing project.
Clay is basically fine grit suspended in clay for ease of use. Yes, that means it's like really fine sandpaper. It works by basically shearing off the contaminates from the surface.
All clay is basically made by the same companies in Japan becuase they hold the patent (as I understand it). Companies like Megs specify the quality and consistency they want and it is made to their specs. Megs specifies good quality clay (pliable, consistent grit size, etc) and hence their clay is high quality and consistent.
After you've washed your car completely with something that will strip all the wax off, like Dawn (only time you use something like Dawn is when you are completely detailing your car). Then you break off a small chunk of clay and flatten it into a pancake 2-3 inches in diameter. Get a good quality quick detailer, like Megs Quick Detailer, and mist a small 12 X 12 area and rub the pancaked clay gently back and forth over the area a few times. If you feel the clay grab, stop and spray more. The idea is to keep the area well lubricated. Then wipe that area with a quality terry or microfiber.Read more ›
I've used several (milder) clay bars in the past from brands such as sonus, mother's, meguiars, zaino, Griot's, and a couple of others. I've found them to vary both in terms of ease of use and speed at which they removed the contaminants.
My assumption with this clay was that being 'Aggressive', it'd remove the bonded contaminants with less elbow-grease than milder claybars. Instead, what I found (and later confirmed by reading online) is that this clay is intended for heavy contamination, and as a precursor to swirl removal.
I was careful to use this clay as directed, and with plenty of spray to keep the surface lubricated. It did a good job of removing contamination, but not noticeably better than other brands I've used. The major downside I found with this clay was that it marred the paint horribly, leaving swirl marks all over the finish which was previously lightly swirled.
If you plan to machine polish the car afterwards anyway, or don't care about swirl marks this is probably a good enough product. For a light to normal amount of surface contamination, I'd strongly recommend you look at something milder.
The only cons: you can't use this on black plastic or rubber.
Tip: The mfg. suggests a couple of products to use with the bar so it slides. Don't buy other cleaners to use with this, just use soapy water. Also, plan on a few hours to clean the whole vehicle to do a good job.
If you don't require the agressive, always use the mild grit of this product.
Most Recent Customer Reviews
I honestly just use it as regular clay, make sure you Lube. I use Meguiars Last Touch as lube. Works great. You have to polish and wax after.Published 11 days ago by Saud
Great Clay. I was able to remove 10 year old over-spray from an old restoration paint job. I would recommend using this clay along with Mequiar's M34 Mirror Glaze Final Inspection... Read morePublished 1 month ago by Amazon Customer
I clayed my car yesterday and I ran into a few issues with this clay. My main issue is that while I would clay, some tiny chunks would break off, either in my hand or on the car... Read morePublished 1 month ago by Jeno