|Part Number||2696-24, 0880-20, 2663-20|
|Item Weight||10 pounds|
|Item model number||2696-24|
|Batteries||4 A batteries required. (included)|
|Is Discontinued By Manufacturer||No|
|Maximum Power||800 Watts|
|Torque||1400 Inch Pounds|
|Item Package Quantity||1|
|Number Of Pieces||4|
|Luminous Flux||100 Lumen|
|Included Components||(1) Contractor Bag, (1) M18 Compact 1/2" Hammer Drill/Driver (2607-20), (1) M18 SAWZALL Recip Saw (2620-20), (1) M18 1/4" Hex Impact Driver (2656-20), (1) M18 Work Light (2735-20), (1) M18 REDLITHIUM XC Extended Capacity Battery (48-11-1828), (1) M18 & M12 Multi-Voltage Charger (48-59-1812)|
|Battery Cell Type||Lithium Ion|
|Description Pile||M18 REDLITHIUM|
|Warranty Description||5 Years|
Add to your order
from Asurion, LLC $33.99
- NO ADDITIONAL COST: You pay $0 for repairs – parts, labor and shipping included.
- COVERAGE: Plan starts on the date of purchase. Drops, spills and cracked screens due to normal use covered for portable products and power surges covered from day one. Malfunctions covered after the manufacturer's warranty.
- EASY CLAIMS PROCESS: File a claim anytime online at www.Asurion.com/Amazon or by phone. Most claims approved within minutes. If we can’t repair it, we’ll send you an Amazon e-gift card for the purchase price of your covered product or replace it.
- MORE DETAILS: Additional information about this protection plan is available within the “Product guides and documents” section. Simply click “User Guide” for more info. Asurion will also email your plan confirmation with Terms & Conditions to the address associated with your Amazon account within 24 hours of purchase (if you do not see this email, please check your spam folder). Contact us if you cannot locate your plan confirmation and Terms & Conditions via email at AmazonFeedback@Asurion.com.
Friday, Dec 16
Ships from: Amazon Sold by: JBTools
Save with Used - Good
Dec 23 - 30
Ships from: taiyuantianweidianzishangwuyouxiangongsi Sold by: taiyuantianweidianzishangwuyouxiangongsi
Other Sellers on Amazon
Milwaukee 2696-24 M18 Cordless Compact Combo Tool Kit
Enhance your purchase
|Item Weight||10 Pounds|
|Battery Cell Composition||Lithium Ion|
|Number of Batteries||4 A batteries required. (included)|
About this item
- Make sure this fits by entering your model number.
- M18 cordless 1/2-inch hammer drill/driver with 4-pole frameless motor delivers 550 in-lbs of peak torque, 0-450/0-1,700 rpm
- M18 Sawzall reciprocating saw provides patented gear-protecting clutch and counter balance mechanism
- M18 1/4-Inch Hex Impact with 4-pole frameless motor delivers 1400 in-lbs of torque
- M18 work light provides a fold-away hook for hands free use and a 135-degree rotating head
- Also includes, two M18 XC high-capacity Red Lithium batteries, 1-hour charger, contractor bag
Customer ratings by feature
Customers also search
What's in the box
Compare with similar items
| || |
Milwaukee 2696-26 M18 Cordless LITHIUM-ION 6-Tool Combo Kit
Milwaukee Electric Tools 2997-22 Hammer Drill/Impact Driver Kit
Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Combo Kit with Two 5.0 Ah Batteries, 1 Charger, 2 Tool Bags (7-Tool)
|Sold By||JBTools||TYH Sales||AvlStore||SSAL TOOLS|
|Are batteries required?||Yes||No||No||No|
|Battery Cell Composition||Lithium Ion||Lithium Ion||Lithium Ion||Lithium Ion|
|Included Components||(1) Contractor Bag, (1) M18 Compact 1/2" Hammer Drill/Driver (2607-20), (1) M18 SAWZALL Recip Saw (2620-20), (1) M18 1/4" Hex Impact Driver (2656-20), (1) M18 Work Light (2735-20), (1) M18 REDLITHIUM XC Extended Capacity Battery (48-11-1828), (1) M18 & M12 Multi-Voltage Charger (48-59-1812)||Multitools||Pneumatics, Combo Packs, Power Tool Combo Packs||Tools includes: M18 FUEL 1/2 in. hammer drill (2804-20), M18 FUEL 1/4 in. hex impact driver (2853-20), M18 FUEL SAWZALL reciprocating saw (2821-20), M18 FUEL 6-1/2 in. circular saw (2730-20), M18 FUEL 1/2 in. mid-torque impact wrench (2962-20), M18 FUEL 4-1/2 in./ 5 in. grinder paddle switch, M18 LED work light (2735-20), 2 M18 REDLITHIUM XC 5.0 battery, 1 M18 and M12 multi-voltage charger|
|Item Dimensions||0 x 0 x 0 inches||8.13 x 30.61 x 14.2 inches||6 x 20 x 14 inches||14 x 12 x 10 inches|
|Item Weight||10.00 lbs||—||14.90 lbs||—|
|Number of Pieces||4||6||—||—|
|Power Source||electric-powered||Cordless||Battery Powered||Battery Powered|
|Voltage||18 volts||18.00 volts||0 volts||18.0 volts|
M18 COMBO CMPT HMR DR/SWZL/1/4 HEX IMP DR/LGT/CHGR/2 BAT. The product is easy to use. The product is durable. The product is manufactured in China.
From the Manufacturer
The 2696-24 M18 cordless 4-tool combo kit includes the 2602-20 1/2-inch hammer drill/driver, the 2620-20 Sawzall reciprocating saw, the 2650-20 1/4-inch hex impact driver, and the 49-24-0171 work light. The M18 cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight, and performance in the industry. Powered by Red Lithium batteries, the M18 cordless system delivers high torque, high power, and a long run-time.
Reviews with images
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
-All metal chuck
-LED light above the hand-grip illuminates the work surface and stays lit for 5 seconds after I let off the trigger. This comes in handy for dimly lit corners.
CONs (nothing noted)
-Compact size is very helpful in tight spaces.
-LED light above the hand-grip illuminates the work surface and stays lit for 5 seconds after I let off the trigger. This allows me to see what I'm doing as I position the next screw.
-The pull-out collar allows for quick bit changes.
-Its great to bore pilot holes with the Hammerdrill, and drive screws with the impact driver without having to change between bits on a single drill.
-This Impact driver doesn't have a clutch to prevent driving fasteners too deep, but the veriable speed trigger allows for good control. I haven't yet had a need for a clutch, but I'll be cautious when screwing into soft finish-grade material(Think 'a sheet of cork, as a dart-board backer').
-I found it to be a little under powered when removing 4" trim screws from stair treads which were glued down. The driver removed 90% of the screws successfully, but there were a few that it couldn't budge. For all other jobs its had plenty of torque.
-The quick release for changing blades is the easiest I've ever used.
-It drains the battery rather quickly.
-Fold-out hook is bound to come in handy one day.
-I would have liked an LED light instead of Xenon incandescent. That would have made for longer run time on a charge and the LEDs themselves would have lasted much longer than the traditional bulb.
BATTERIES and CHARGER
-The fuel gauge feature on the battery packs is a definite plus. Just push the button on the battery and it lights up with either 1.. 2.. 3.. or 4 LEDs to show the remaining charge.
-Batteries fully charge in one hour.
-Occasionally, the battery does not 'seat' properly on the charger and I need to gently push it down for the light on the charger to come on.
Note: When I first received this set in the mail one battery charged properly, but the other caused a "faulty pack" signal when I put it on the charger. I returned the set to amazon and they promptly mailed me a replacement set.
Just remember to pull out the charger and batteries try charging both of them before unpacking the rest of the set.
Overall I am very pleased with this set. I highly recommend it for both Professionals and Home owners.
You can plan on spending about $40 to $80 on drill bits, Sawzall blades, screw driver bits, nut drivers, spade bits etc.
Note: Avoid driver bit sets labeled "Impact Ready". The 1 inch bits go into the extender easy enough, but removing them requires brute strength and a pair of pliers. Stick with buying small sets of 2 inch philips, square, torques, and nut diver bits and combine them in a generic case. The 2 inchers are designed to fit in the impact driver without an extender.
The main problem is on the chuck of the drill: although it looks "cosmetically" good, all metal, it is in reality of an horrible quality and screams "China" real loud. Tightening it is a painful experience of poor internal design with rough friction instead of the silky smooth chuck mechanics you can experience with Rohm chucks or even the Jacobs chuck of my 10 years old Dewalt. Worse of all: it wobbles terribly which is purely unacceptable for what is supposed to be a "pro" drill.
The guys at Milwaukee did apparently forget the fact that a drill is, by order of importance and priority 1) a chuck gripping well and turning true, 2) a good motor-gearbox assembly with torque and durability 3) an ergonomic handle, good batteries and all the rest.
They need to react fast because if they continue to slap what was once a reputable name onto average chinese quality to sell it at a premium price, and users find then the usual same flaws they have in noname chinese products you can get at 1/4 of the price, the Milwaukee reputation will vanish fast.
***** EDIT JANUARY 19 *****
I actually did remove the chuck and the drill spindle looked of good quality and rotating true. So I purchased and excellent chuck for hammer drills from Röhm, made in Germany (40 Euro), and it now works extremely well, I now have a real pro drill. Looking in more detail at the initial chuck supplied, this is really chinese junk, the 1/2 thread connecting it to the drill is simply not aligned with the center axis of the 3 chuck jaws. The mechanical quality 101 is not there. I guess this chuck is not made under Milwaukee quality control in their plant but simply sourced from one of the various no-name tool suppliers in China. What a pity Milwaukee spoils the quality of what is otherwise a very fine drill with such a junk chuck, the worse of what we can expect from chinese manufacturing: all metal, looks good, but the quality basics which is a good alignment, isn't there. You can purchase this drill, but plan another 60 $ for a good chuck.
CONS: For me there aren't very many cons. These sets always seem to include a flashlight. In the 3 years I've owned this set I think I've used the light MAYBE twice. And even then it was only for a few minutes.
It is nice to have the case to hold all of the tools but it is just a soft-sided bag. So you basically just throw the tools in there and carry it off. Something more rigid would be better in my mind but might add more weight.
Lastly, I have had occasional trouble getting the batteries to connect properly in the charger. I'll put the battery in and come back to the charger when the other battery dies only to find the one in the charger didn't make a connection so is also still dead. This happens only occasionally but is still frustrating to be put on hold while waiting for a battery to charge.
PROS: Two included batteries. Batteries have a button to push and will show how much charge is left.
Sawzall has lots of power to get through a wide variety of materials.
Heavy Duty and durable tools all around.