0 items added

To add items, choose from the table below

Image is representative of the product family. Select individual products in the table below for more specific images and product specifications

Milwaukee Valve 149 Series Bronze Gate Valve, General Service, Class 125, Rising Stem, Solder End

Available in multiple versions

Price: $26.98 - $1,035.00
Product Specifications
Brand Name Milwaukee
Material Type Bronze
Maximum Pressure 200  PSI
System of Measurement Inch
Connector Type Solder End
Handle Type Hand Wheel
Internal Packing Material Type Graphite
Manufacturer Series Number 149
Maximum Steam Pressure Description 125 pounds_per_square_inch
Operation Mode Manual
Structure Description Rising Stem
UNSPSC Code 40141613

Currently showing 1-9 of 9
The Amazon Standard Item Number (ASIN) uniquely identifies the item in the Amazon catalog.
Overall Length Part Number Price Quantity
B0068TVWYK 7.25 inches 149 - 400
B0068TVXDA 2.5 inches 149 - 34
B0068TVY2U 1.63 inches 149 - 38
B0068TVYW0 1.88 inches 149 - 12
B0068TVZKG 3.25 inches 149 - 114
B0068TW028 3.63 inches 149 - 112
B0068TW2AI 4.31 inches 149 - 200
B0068TW3LQ 3 inches 149 - 100
B0068TW4DS 4.81 inches 149 - 212
Currently showing 1-9 of 9
Could not load your selection

We're sorry. An error occured when we tried to load your product family table. Rest assured, we're working to resolve the problem as soon as possible. Please refresh the page.

Product Features

  • Made of bronze for higher strength and corrosion resistance than brass
  • Rising stem with inside screw lifts with the gate to signal visually when the valve is open
  • 200 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG) and 125 psig for saturated steam pressure
  • Solder end connections for semi-permanent connections to a piping system
  • Top-mounted iron hand wheel for lowering and lifting the gate

Product Description

This class 125 Milwaukee Valve 149 series bronze gate valve has a rising stem and solder end connections on both ends. The bronze body, solid wedge gate, and threaded bonnet provide higher strength and resistance to corrosion than brass, and the valve has a rising stem that moves up and down with the gate to offer a visual signal (when extended) that the valve is open. The stem design and graphite internal packing also prevent the stem threads from coming into contact with flow to avoid corrosion for longer valve life. The maximum pressure is 200 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG) and 125 psig for saturated steam pressure. It has solder end connections on both ends for a semi-permanent connection to a piping system. Mounted on top of the valve, a manually operated malleable iron hand wheel activates the inside screw mechanism which lifts and lowers the gate to start and stop the flow between the connected pipes. This class 125 valve meets Manufacturers Standardization Society (MSS) SP-80 (with the exception of the 4-inch model of this valve, as it has a split wedge and bolted bonnet that does not meet MSS SP-80) standard for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. The valve is appropriate for use in general service in plumbing and heating piping systems.

Gate valves control flow in a piping system by lifting a gate out of the path of steam, fluids, or gases. They are designed to block or permit flow, as the vibrations and force of flow repeatedly striking a partly lowered gate can damage the gate and seats. To accommodate different flows and pressure requirements, gates come in four types: solid wedge (appropriate for almost all liquid service), flexible wedge (appropriate for steam service), split wedge (appropriate for normal temperature, non-condensing gas and liquid service, including corrosive service), and parallel disk (appropriate for high and low pressure applications). Hand wheels or levers activate the screw mechanism in the valve’s bonnet, which comes in various designs, to open and close the gate. Union bonnets are preferable for building service piping, threaded-in (or screw-in) bonnets work well for lighter-duty usage, and bolted body-bonnet connections are used primarily in iron multi-turn valves. Most gate valves have either a rising stem, which moves up and down with the gate, or a non-rising stem, which remains fixed in place. When closed, the gate and its seats form tight planar sealing surfaces, ideal for linear liquid flow. Gate valves are used in air, gas, liquid, and steam applications.

The Milwaukee Valve Company manufactures manual and actuated valves, controls, and control accessories. The company, founded in 1901, and headquartered in New Berlin, WI, meets International Organization for Standardization (ISO) 9001:2008 and 14001:2004 standards.

Product Details

  • Shipping Weight: 10.4 ounces (View shipping rates and policies)
  • Domestic Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
  • International Shipping: This item is not eligible for international shipping. Learn More
  • ASIN: B0068UC2GQ
  • Product Warranty: For warranty information about this product, please click here

Customer Questions & Answers

Customer Reviews

There are no customer reviews yet.
5 star
4 star
3 star
2 star
1 star
Share your thoughts with other customers