this meter works well we called the company and spoke to the male (sales guy/tech) good help and want over meter and calibrated it three times (meter got more closer to the 4.01 (around 4.02, 4.03 (it does it times tak a while to find itself and can wounder around +/- 5 (there is a window of 3.96 to 4.06 which is 4 ). we tried several meters the Oakton EcoTestr pH 2 is a good meter but it only reads 0.0 good back up and it really works wells out of the others.
for the Milwaukee MW102 PH and Temperature Meter we find it works just a little better and gives more reading. Calibration works best if you use wash sample 4.01 than to sample 4.01 with temp prop and repeat. this meter is not junk it does take a little time to read to higher level the Oakton EcoTestr pH 2 is faster but not has accurate but close. the Milwaukee MW102 PH unit is a basic PH meter with temp sample field unit good price in market for what it is--(no data sd card slots etc...). thanks milwaukee. (if the unit goes bad or anything i will post it so far so good).
unit is runing ok so far had to re calibrate (did it several) times with wash 4.01 and the test 4.01 etc.. and the meter sames to be reading +/- about 2 or 3 more close to 2. the meter works well just wish it would find its calibration zone faster. there are times where is just struggles to find the calibration and the Oakton EcoTestr pH 2 is all ready there. I have ordered cleaning solution to see if this helps.
ok i am returning this unit the 102 and will try the Milwaukee 105 pro model. the 102 just too many time takes to long to find it self to many times, eats up way to much time and i have to 2nd check it (so if i check 50 pools a day this meter will kill me... maybe probe change or broad but i can not use it working like this.
i will update on the Milwaukee 105 pro after using it i will update findings.
OK Milwaukee 105 pro works great. We had to call the company and get a replacement probe for unknown reason the 1st probe was faulty. the tech guys at Milwaukee are very helpful and help us with new replacement probe. the Milwaukee 105 reads a little faster it sames than the 102 but the run is at time very close. BUT it works very well and both PH and TEMP are displayed on screen with this unit makes it nice to not have to switch screens. (the Oakton EcoTestr pH 2 is faster). this test is great for bench and table work. (after calibration this 105 meter was 100% on the money 4.00 and 7.00 and reads with a very high degree accuracy.
Final NOTE: Both units 102 and 105 Milwaukee's are (2 points) calibration the Oakton EcoTestr pH 2 is a (3 point) we called many companies for the answer and we are told that 3 points calibrate faster and many companies are moving to the pens and 3 point and auto cal from factory like the Oakton EcoTestr pH 2 this pen has factory calibration without any butter set by the factory watch you can at any time set it back to factory ((we checked factory and it is right on for 4.0 ((not 0.00)) that good. like to see other meters have this option.
conclusion: 102 and 105 Milwaukee's are (2 points)slower than (3 points) work great. Great product and the Milwaukee's customer service was very helpful and fixed any issues. the Oakton EcoTestr pH 2 we use and it is a great meter with great factory reset calibration without solution.
hope this helps all and please leave commands for others if you want thank you.
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Frequently bought together
$120.99
Get it as soon as Thursday, Jan 11
In Stock
+
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Videos for similar products
Reviews with images
Submit a report
A few common reasons customers report reviews:
- Harassment, profanity
- Spam, advertisement, promotions
- Given in exchange for cash, discounts
When we get your report, we'll check if the review meets our Community guidelines. If it doesn't, we'll remove it.
Sorry, there was an error
Please try again later.Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
good piece of equipment works well reads slow at times but so far accurately to a pretty good degree
Reviewed in the United States on February 11, 2014
good piece of equipment works well reads slow at times but so far accurately to a pretty good degree
Reviewed in the United States on February 11, 2014
this meter works well we called the company and spoke to the male (sales guy/tech) good help and want over meter and calibrated it three times (meter got more closer to the 4.01 (around 4.02, 4.03 (it does it times tak a while to find itself and can wounder around +/- 5 (there is a window of 3.96 to 4.06 which is 4 ). we tried several meters the Oakton EcoTestr pH 2 is a good meter but it only reads 0.0 good back up and it really works wells out of the others.Reviewed in the United States on February 11, 2014
for the Milwaukee MW102 PH and Temperature Meter we find it works just a little better and gives more reading. Calibration works best if you use wash sample 4.01 than to sample 4.01 with temp prop and repeat. this meter is not junk it does take a little time to read to higher level the Oakton EcoTestr pH 2 is faster but not has accurate but close. the Milwaukee MW102 PH unit is a basic PH meter with temp sample field unit good price in market for what it is--(no data sd card slots etc...). thanks milwaukee. (if the unit goes bad or anything i will post it so far so good).
unit is runing ok so far had to re calibrate (did it several) times with wash 4.01 and the test 4.01 etc.. and the meter sames to be reading +/- about 2 or 3 more close to 2. the meter works well just wish it would find its calibration zone faster. there are times where is just struggles to find the calibration and the Oakton EcoTestr pH 2 is all ready there. I have ordered cleaning solution to see if this helps.
ok i am returning this unit the 102 and will try the Milwaukee 105 pro model. the 102 just too many time takes to long to find it self to many times, eats up way to much time and i have to 2nd check it (so if i check 50 pools a day this meter will kill me... maybe probe change or broad but i can not use it working like this.
i will update on the Milwaukee 105 pro after using it i will update findings.
OK Milwaukee 105 pro works great. We had to call the company and get a replacement probe for unknown reason the 1st probe was faulty. the tech guys at Milwaukee are very helpful and help us with new replacement probe. the Milwaukee 105 reads a little faster it sames than the 102 but the run is at time very close. BUT it works very well and both PH and TEMP are displayed on screen with this unit makes it nice to not have to switch screens. (the Oakton EcoTestr pH 2 is faster). this test is great for bench and table work. (after calibration this 105 meter was 100% on the money 4.00 and 7.00 and reads with a very high degree accuracy.
Final NOTE: Both units 102 and 105 Milwaukee's are (2 points) calibration the Oakton EcoTestr pH 2 is a (3 point) we called many companies for the answer and we are told that 3 points calibrate faster and many companies are moving to the pens and 3 point and auto cal from factory like the Oakton EcoTestr pH 2 this pen has factory calibration without any butter set by the factory watch you can at any time set it back to factory ((we checked factory and it is right on for 4.0 ((not 0.00)) that good. like to see other meters have this option.
conclusion: 102 and 105 Milwaukee's are (2 points)slower than (3 points) work great. Great product and the Milwaukee's customer service was very helpful and fixed any issues. the Oakton EcoTestr pH 2 we use and it is a great meter with great factory reset calibration without solution.
hope this helps all and please leave commands for others if you want thank you.
Images in this review
Reviewed in the United States on December 11, 2021
Reviewed in the United States on September 10, 2014
Top reviews from other countries
José Carlos
Excelente para probar el PH del macerado. Si a eso le sumas que estaba en oferta, mucho mejor.
Reviewed in Mexico on March 21, 2023
José Carlos
Reviewed in Mexico on March 21, 2023
Es un poco complicado al inicio entender la calibración, pero leyendo un poco y buscando algunos tutoriales se logra sin problema.
Images in this review
wuilmer jose venegas barrios
Good quality price
Reviewed in Canada on September 21, 2022
tommaso valenzano
Unprofessional
Reviewed in the United Kingdom on November 16, 2021
tommaso valenzano
Reviewed in the United Kingdom on November 16, 2021
Images in this review
