Mount-It! MI-1214 Speaker Stands for Home Theater 5.1 Channel Surround Sound System Satellite Speaker Stands Mounts, Rear and Front, 2 Pairs, 10 lb Capacity, Black
- NOTE: MI-1214 is a set of 2 x MI-1210.
- Universal Surround Sound Speaker Stands (4 Stands) for home theater system satellite speakers. Ideal for front pair and rear pair positions for a 5-speaker set up. Compatible with most speakers on the market such as Bose Acoustimass, Bose Cinemate, Jewel Cubes, Lifestyle Speakers, Samsung, Klipsch, Yamaha, Polk, JBL, Panasonic, etc.
- Multiple speaker attachment methods including keyhole style, single bolt or screw type. Mount speakers using 1/4-Inch x 20 mounting screw or keyhole mount; Fits Single Thread Type Fitting , all hardware provided.
- The pole is height is adjustable from 26.8-Inch (680mm) to 43.3-Inch (1100mm), to place your speakers at optimal height for stereo or surround sound. Heavy-gauge offset steel pillar features integrated wire channel for cable management system through middle of stands.
- Floor-standing attractive sleek design lets you put speakers in the best position for sound quality. The heavy cast-iron base has four legs provides stability, even on thicker carpets.Includes top plate, L-shaped brackets and keyhole adapter, stable floorstanding base.
Frequently bought together
Customers who bought this item also bought
Customers who viewed this item also viewed
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
Compare with similar items
AVF EAK80B-A Speaker Floor Stands, Metal Base, Adjustable Height (Set of 2), Black
Atlantic Satellite 77305018 2 Speaker Stands, Black, 2 Stands Per Pack
OmniMount Gemini 1-B Medium Speaker Stand with 4 Base Plates
SANUS BF31-B1 31" Speaker Stands for Bookshelf Speakers up to 20 lbs - Black - Set of 2
AmazonBasics 16-Gauge Speaker Wire - 100 Feet
|Shipping||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping|
|Sold By||Amazon.com||Amazon.com||stores123||Electronic Express||Sanus AV||Amazon.com|
|Item Dimensions||5.38 x 28.25 x 8.5 in||8.66 x 23.03 x 3.15 in||13 x 24 x 2.75 in||50 x 15.5 x 17 in||11.25 x 29.6 x 2.45 in||3.43 x 5.12 x 5.43 in|
|Item Weight||18.56 lbs||7.72 lbs||11.38 lbs||10.15 lbs||15.6 lbs||1.08 lbs|
|Style Name||—||Metal Base||Adjustable||GEMINI-1||-||Speaker Wire|
MI-1214 floor-standing speaker stands allows you to install your home theater satellite speakers at an ideal location, away from a wall. The stands have a sleek, compact, low base design that will fit into any location, and it will enhance the appearance of your home. They are great for any room, especially a home cinema or living room.
Simple to set up and easy to fine-tune, these speaker stands make a good addition to almost any home stereo or surround sound setup. Many small satellite speakers have ports on the back, which are designed to improve the bass response. For best sound response, it is usually recommended to mount these speakers about 1-2 feet away from the wall, to allow the ports to work properly.
MI-1214 are designed with a heavy-gauge cast iron base to hold any satellite speakers with a single thread or a keyhole fitting. Built-in cable management discreetly routes cables for a clean installation.
The stands are height adjustable from about 26.8" to 43.3", allowing you to mount the speakers at your ear height when sitting. They can hold speakers weighing up to 5 lbs each.
Please note, cable pass through the pole will not be possible with speakers that have special connectors. These special connectors should be connected to the cable only after the cable has run through the pole.
Please note, these stands are not compatible with speakers with mounting holes located at the bottom, top or left/right side of the speaker. The mounting holes must be on the back of the speaker to be compatible with this stand.
Top customer reviews
There was a problem filtering reviews right now. Please try again later.
My picture barely shows it holding the 4 pioneer surround speakers that I inherited.
For those curious, 100ft of cable covered the runs to take the back left to the back right and then both of the back to the front right of the entertainment center where the stereo is. It also covers the lengths for the 3 other channels and the sub up front with enough left over wire for if I need to redo one of the back runs eventually.
To be fair to the product, I think it's not only a matter of build quality, but design too: These stands, and many similar out there, are just too thin and too tall to be able to properly balance the weight of a decent surround speaker.
My recommendation: Think carefully about your alternatives before buying these. Consider mounting the speakers on the wall (you can hide the cables using thin cord channels)
Be careful when move it around, hold and lift the rod do not hold and lift from the speaker.
~Mostly easy to set up. Fishing the speaker wire through the pole was tricky, but putting it together was pretty straight forward.
~Slender unobtrusive design. Small footprint.
~Easily adjustable, but be careful you don't pull it too high or it will come apart and putting it back together is tricky.
~Height - or lack thereof. I have overstuffed (tall) couches. The stand was not high enough to get the rear speaker over them. I had to get a milk crate to get the height I wanted.
~Key hole speaker mounting - For speakers with the key hole type attachment, it was hard to get it mounted tight enough so the speaker would not swing side-to-side on the mounting screw. This is not a big deal because once I placed the speakers in their final position and turned the speakers back vertical on the mount, they should stay vertical unless bumped.