Top critical review
31 people found this helpful
Would've rated 5 stars, however.... (UPDATED on 3/31/14)
on March 29, 2014
I bought this item last year and used it once until yesterday (3/28/14) - the 2nd time I used this. Disappointingly, the on/dimmer dial broke as I barely placed pressure on it when turning it on. I can hear a small piece rattling inside the unit. I'm very careful with all my equipment and the light was always housed in the cardboard box it came in so I know it wasn't thrown around or misused.
And as my title indicated, I would've rated this 5 stars if not for the defective part which is probably the most important part of the item, so I give it a 1 star rating. I can no longer turn the light on or off and obviously can't use the dimmer function. I guess the only good thing is that I can still use it at full power when all the batteries are installed, but I have to take at least 1 battery out to turn the unit off.
I'm very disappointed because it was great during my initial use.
I took the unit apart and fixed the dial so that it now works. It was an easy fix so I guess I'll give it a true rating of 4 stars now. I'll leave off a star just because the dial will probably come loose again eventually when it shouldn't have after 2 uses. I'll also leave the 1 star rating so that more people will likely read the review and know how to fix it if they should ever encounter the same issue.
To fix, remove all batteries and remove all 4 screws from the back of the unit. That will remove the front cover lip (for lack of a better description) to give access to the 4 screws on the corner of the led light panel. Remove those 4 screws and you'll be able to lift the led panel along with a 2nd panel to gain access to the dial. What happened with my unit was that the screw that held the dial in place unscrewed itself and the dial came off it's spool. Luckily the screw didn't fall out of the unit so I repositioned the dial, replaced the screw, and tightened. Over-tightening will cause the dial to not turn very easily, but if you under-tighten, you take a chance of the screw coming out eventually. Anyway, replace panels and all screws.