A. I’m a prof photographer / filmmaker, just so you get an idea of my understanding of gear. B. I own a Carbon Fiber Tripod that already does this, {It was @ $600~ for comparison}, so I bought this because My Tripod uses the center column to slide horizontally, so I bought this to put on my AMT 341 HD Induro, & get better height and reach. So in a nutshell to make a decision, if you need more flexibility, and better versatility incl film shooting style rigs, THIS IS YOUR DEVICE.!!
What u get, 1. A sturdy 2 piece center column, that can be extended at any angle horizontally, mounted to the 3/8 screw on you Tripod. 2. A second shorty column if you need a center column to hang it from, but REALLY IT SCREWS ONTO THE FIRST PIECE OFFERING A FULL LENGTH COLUMN, w/ better rigidity. 3. The attaching joint is a Rosetta grip style. {There are teeth that allow for a solid tightening of the adjustment screw, : that allows rotation and allows tilts angles.}. 3. The center column is rock solid, slightly smaller than my Induro, but I hung 12 lbs of Camera and Full Remote Pwrd Wireless Gimbal, {With FollowFocus & Aperture, motors}, and although the mount is HD FIBER PLASTIC, it holds strong. IF I WERE TO NEED TO HAND MY RED DRAGON UNIT, I’m thinking I might feel a little concerned about cranking down on that piece, aside from that 1 thing, I’d say based on Neewers reputation it’s a solid AA++ for this price , in fact it’s 5 stars, I withheld 1, only as I believe for slightly more the mount could’ve been metal. The rest deals with filmmakers-
I use this for an extension arm to hang a DJI RONIN M, Pwrd Gimbal for filmmaking. It is definitely 100% strong enough for any photo purposes (I know of), macro, Low Angle, inverted, etc., and moreover to spend $ on another tripod that does this I suggest a diff option. Admittedly, I can make equip choice w/out worrying about cost, {sometimes}, however, a pet peeve is overpriced common gear like tripods. At any rate I needed an all in one. Tri, Linear Jib, Shrt Crane, which led me to my CF Tri purchase. Which really doesn’t do any of it. By leaving the center column in, {WITH THIS DEVICE, FROM NEEWER A CO IVE BEEN DEALING WITH FOR YEARS AND ACTUALLY THEYRE A BRAND NAME, OFF SHOOT}. So if your looking for a great way to hang your Ronin M, in normal filming mode - because inverted even though the gimbal will rotate in all directions that way, it becomes inverted shooting upside down. So I hung it from a camvate robin m plate, and a bogey 3 way adjust head w/ a thumb screw. Happy filming it works phenomenal .
Similar items that may ship from close to you
Page 1 of 1 Start overPage 1 of 1
Product Description
Neewer Camera Tripod Boom Arm: External Multi-Angle Center Column Extension Arm for Studio Outdoor Macro Over Head Shooting
NOTE: Cameras, Tripod, and Ball Head are NOT included.
- Compatible with 25mm diameter tripod of which the central column can be taken out.
- Designed with 1/4 and 3/8 screw, it is compatible with most ball heads, tripods and cameras. Extension Arm is compatible with all 3/8-inch interface tripod and you can attach 3/8-inch ball head or 1/4-inch camera on Extension Arm.(Ball Head NOT Included)
- 360 degrees rotatable Horizontally and 180 degrees rotatable vertically. Rotatable and tilt-able Multi-angle center column enables the camera to be placed in diverse position.
- Sturdy aluminum construction and locking system can ensure 11 pounds/5 kilograms load capacity.
- With a sand bag hook on the end, it can bear up more to keep stable. (Sandbag Not included)
Specifications:
- Horizontal Tube Length: 12.6 inches/32 centimeters
- Central Column Tube Length: 6 inches/ 15.5 centimeters
- Tube Diameter: 1 inches/25mm
- Item Weight: 16 ounces/ 465 grams
- Load-bearing: 11 lbs/5 kilograms
- Material: Magnesium-aluminum alloy
- Applications: Extension Arm is compatible with all 3/8-inch interface tripod and you can attach 3/8-inch ball head or 1/4-inch camera on Extension Arm
- Color: Black
|
|
|
|
|---|---|---|
|
Horizontally 360 degrees rotatable while vertically 180 degrees rotatable. |
The bubble level allows you to adjust the angle precisely. |
Horizontal tripod arm with magnesium-aluminum alloy pipe. Center Column pipe with 25mm diameter |
Center Column Extension Arm Perfect for Studio Outdoor Macro Over Head Shooting
Package Contents: 1 x Tripod Center Column Extension Arm; 1 x Locking Mount System; 2 x Hook
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for related products
1:47
Click to play video
The Good & Bad! Glide Gear OH50 Pole
Shan & Jay Reviews
Videos for related products
0:30
Click to play video
Learn more about Gongyi camera overhead mount
HaoYan Direct
Videos for related products
5:41
Click to play video
Top down birds eye view tripod desk shot
Zulf - TrustedCreators
Videos for related products
1:05
Click to play video
TARION Tripod Extension Arm Horizontal Centre Column
MetroVision US
Videos for related products
0:57
Click to play video
Multi-Angle Center Column
K&F Concept
Videos for related products
0:43
Click to play video
ILOKNZI Center Column Tripod Extension Arm
glorybull
Videos for related products
0:54
Click to play video
This thing is crazy! Watch this before you buy it
S&S Entertainment :)
Videos for related products
6:37
Click to play video
K&F Concept 67 inch Tripod: Everything You Need To Know
Ben Taylor
Reviews with images
Submit a report
A few common reasons customers report reviews:
- Harassment, profanity
- Spam, advertisement, promotions
- Given in exchange for cash, discounts
When we get your report, we'll check if the review meets our Community guidelines. If it doesn't, we'll remove it.
Sorry, there was an error
Please try again later.Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on September 4, 2019
What u get, 1. A sturdy 2 piece center column, that can be extended at any angle horizontally, mounted to the 3/8 screw on you Tripod. 2. A second shorty column if you need a center column to hang it from, but REALLY IT SCREWS ONTO THE FIRST PIECE OFFERING A FULL LENGTH COLUMN, w/ better rigidity. 3. The attaching joint is a Rosetta grip style. {There are teeth that allow for a solid tightening of the adjustment screw, : that allows rotation and allows tilts angles.}. 3. The center column is rock solid, slightly smaller than my Induro, but I hung 12 lbs of Camera and Full Remote Pwrd Wireless Gimbal, {With FollowFocus & Aperture, motors}, and although the mount is HD FIBER PLASTIC, it holds strong. IF I WERE TO NEED TO HAND MY RED DRAGON UNIT, I’m thinking I might feel a little concerned about cranking down on that piece, aside from that 1 thing, I’d say based on Neewers reputation it’s a solid AA++ for this price , in fact it’s 5 stars, I withheld 1, only as I believe for slightly more the mount could’ve been metal. The rest deals with filmmakers-
I use this for an extension arm to hang a DJI RONIN M, Pwrd Gimbal for filmmaking. It is definitely 100% strong enough for any photo purposes (I know of), macro, Low Angle, inverted, etc., and moreover to spend $ on another tripod that does this I suggest a diff option. Admittedly, I can make equip choice w/out worrying about cost, {sometimes}, however, a pet peeve is overpriced common gear like tripods. At any rate I needed an all in one. Tri, Linear Jib, Shrt Crane, which led me to my CF Tri purchase. Which really doesn’t do any of it. By leaving the center column in, {WITH THIS DEVICE, FROM NEEWER A CO IVE BEEN DEALING WITH FOR YEARS AND ACTUALLY THEYRE A BRAND NAME, OFF SHOOT}. So if your looking for a great way to hang your Ronin M, in normal filming mode - because inverted even though the gimbal will rotate in all directions that way, it becomes inverted shooting upside down. So I hung it from a camvate robin m plate, and a bogey 3 way adjust head w/ a thumb screw. Happy filming it works phenomenal .
Awesome addition to any creatives arsenal!! Aa++
Reviewed in the United States on September 4, 2019
A. I’m a prof photographer / filmmaker, just so you get an idea of my understanding of gear. B. I own a Carbon Fiber Tripod that already does this, {It was @ $600~ for comparison}, so I bought this because My Tripod uses the center column to slide horizontally, so I bought this to put on my AMT 341 HD Induro, & get better height and reach. So in a nutshell to make a decision, if you need more flexibility, and better versatility incl film shooting style rigs, THIS IS YOUR DEVICE.!!Reviewed in the United States on September 4, 2019
What u get, 1. A sturdy 2 piece center column, that can be extended at any angle horizontally, mounted to the 3/8 screw on you Tripod. 2. A second shorty column if you need a center column to hang it from, but REALLY IT SCREWS ONTO THE FIRST PIECE OFFERING A FULL LENGTH COLUMN, w/ better rigidity. 3. The attaching joint is a Rosetta grip style. {There are teeth that allow for a solid tightening of the adjustment screw, : that allows rotation and allows tilts angles.}. 3. The center column is rock solid, slightly smaller than my Induro, but I hung 12 lbs of Camera and Full Remote Pwrd Wireless Gimbal, {With FollowFocus & Aperture, motors}, and although the mount is HD FIBER PLASTIC, it holds strong. IF I WERE TO NEED TO HAND MY RED DRAGON UNIT, I’m thinking I might feel a little concerned about cranking down on that piece, aside from that 1 thing, I’d say based on Neewers reputation it’s a solid AA++ for this price , in fact it’s 5 stars, I withheld 1, only as I believe for slightly more the mount could’ve been metal. The rest deals with filmmakers-
I use this for an extension arm to hang a DJI RONIN M, Pwrd Gimbal for filmmaking. It is definitely 100% strong enough for any photo purposes (I know of), macro, Low Angle, inverted, etc., and moreover to spend $ on another tripod that does this I suggest a diff option. Admittedly, I can make equip choice w/out worrying about cost, {sometimes}, however, a pet peeve is overpriced common gear like tripods. At any rate I needed an all in one. Tri, Linear Jib, Shrt Crane, which led me to my CF Tri purchase. Which really doesn’t do any of it. By leaving the center column in, {WITH THIS DEVICE, FROM NEEWER A CO IVE BEEN DEALING WITH FOR YEARS AND ACTUALLY THEYRE A BRAND NAME, OFF SHOOT}. So if your looking for a great way to hang your Ronin M, in normal filming mode - because inverted even though the gimbal will rotate in all directions that way, it becomes inverted shooting upside down. So I hung it from a camvate robin m plate, and a bogey 3 way adjust head w/ a thumb screw. Happy filming it works phenomenal .
Images in this review
Reviewed in the United States on March 20, 2023
Reviewed in the United States on October 30, 2022
Reviewed in the United States on March 15, 2022
Reviewed in the United States on March 28, 2019
A few things to note, you must have a tripod that allows for removal of the center piece. This comes with its own pieces but should work with most tripods. With that said. This makes my filming so much easier because it allows me to move my camera closer to my face. I really am glad I purchased this product. It really works and it is very sturdy. The build quality of the arm is def very strong. I would recommend this for those that are using DSLR's or Camcorders. The camera I have on the stand is an Sony AX100 4K. It weighs about 2 lbs.
Images in this review
Reviewed in the United States on November 6, 2020
Reviewed in the United States on January 9, 2020
As others have said, it works OK- but I would not take it out into the field and trust it with a pro level camera. Use it at home with your DSLR or whatever. Use it for holding your smartphone. For those things it works well.
More importantly- they call this item "professional" on the box. This is NOT pro level gear. If this quality level is considered their "professional" tier, I wouldn't want to ever see their consumer tier. If they would just be honest about this item I would have given it 5-stars as a decent entry-level option, but if they are claiming this is pro level gear then it gets reviewed as such, and gets 2-stars.
More importantly- they call this item "professional" on the box. This is NOT pro level gear. If this quality level is considered their "professional" tier, I wouldn't want to ever see their consumer tier. If they would just be honest about this item I would have given it 5-stars as a decent entry-level option, but if they are claiming this is pro level gear then it gets reviewed as such, and gets 2-stars.
Images in this review
Top reviews from other countries
Pacocenic
Ligero, pero a valorar con el paso del tiempo los aprietes.
Reviewed in Spain on August 5, 2021Drachenei
Ist eigentlich gut, aber einen Haken gibt es doch (oder auch nicht).
Reviewed in Germany on May 22, 2021
