- Hex Nuts are appropriate for use in low-strength assemblies
- Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
- Drive system is a hexagon-shaped head
- Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
- Ensure a lasting hold for any project
Nylon Hex Nut, Off-White, Right Hand Threads, Meets UL 94V2, Inch
|Price:||$5.80 - $8.63|
|Thread Style||Right Hand|
|Specification Met||UL 94V2|
|Brand Name||Small Parts|
|Finish Type||off white|
Customers who viewed this item also viewed
Most often used on machine screws and threaded rod, these general purpose nuts are for low-strength assemblies. Hex Nuts have flat tops with chamfered corners; bottoms may be flat or chamfered. Hex drive systems are driven with a wrench.
Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).
A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.
Would you like to tell us about a lower price?
Top customer reviews
No matter how careful one tries to be, these little parts were not designed to be installed more than once.
After some research, I found some little nylon bolts, and these matching nylon #4-40 hex nuts, here on Amazon.
They worked perfectly for this purpose, and they are a very inexpensive solution, and they are non-conductive.
Here is the description (for searching) of the matching bolts:
Nylon 6/6 Hex Bolt, Plain Finish, Off-White, External Hex Drive, Meets ASTM D4066/ASTM D6779, 3/4" Length, Fully Threaded, #4-40 UNC Threads
They mechamically worked very well.
Unfortunatley, they were off-white color, not white.
I looked at Grainger, McMaster-Carr, etc. They all avertised "Off-white"
I was pleased to purchase what I thought was going to be white, as per the picture...only to find out it was off white.
So I bought primer and paint, and painted 200 of them white.
When it was all said and done, they were more expensive, and took more time, than if I had ordered stainless from a fastener supply house.
What I got, and what I thought I should get were different.
The Nylon 6/6 Thumb Screw I ordered fit perfectly with the Nylon 6/6 Small Pattern Machine Screw Hex Nuts.
What more can you ask?