- 7.2# Channels
- 90W Power (8ohms 20-20kHz 0.08%) /Ch
- Certified 4 ohms performance
- All discrete circuitry
- Bi-amp capability for front
Onkyo TX-SR607 7.2-Channel A/V Surround Home Theater Receiver (Black) (Discontinued by Manufacturer)
We don't know when or if this item will be back in stock.
- HDTV-Capable (720p/1080i) Component Video Switching (2 Inputs and 1 Output)
- Deinterlacer with Faroudja DCDi Edge™ (Directional Correlational Deinterlacing) Technology
- HDMI™ Version 1.3a to Support Deep Color™, x.v.Color™, LipSync
- 90 Watts per Channel at 8 Ohms, 20 Hz–20 kHz, 0.08%,2 Channels Driven
- Audio and 1080p Video Processing via HDMI
Customers Who Viewed This Item Also Viewed
From the Manufacturer
The Onkyo TX-SR607 - A Stunning Balance of High-Definition Formats, Upscaling Video, and All-Round VersatilityThe TX-SR607 raises the bar once again in the competitive world of mid-range home theater. With HDMI 1.3a inputs for up to six components, it's ready to handle all your high-definition video and audio needs. Whether it's a Blu-ray Disc player, a cable or satellite box, or a gaming console, your video signals will be traveling first class. Lower-resolution analog video signals, meanwhile, can be upscaled
Includes a suite of Audyssey Technologies
(Shown in black)
The very latest Dolby technology, Dolby® Pro Logic® IIz, enhances the spatial sensation of music, movies, and video games by letting you incorporate front height channels. The TX-SR607 packs an array of convenient connectivity options, allowing you to incorporate HD Radio, iPod® and MP3 players, SIRIUS Satellite Radio, and more. Four specialized gaming modes, Audyssey room-correction technologies, and Zone 2 capability add the gloss to what is a phenomenal all-round package.
1080p Video and High-Def Surround Sound via HDMI 1.3a
Incorporating HDMI version 1.3a, along with advanced processing capabilities, the TX-SR607 makes for a powerful A/V control center. Five rear-side HDMI inputs, along with a convenient front-side one, enable connection of up to six components, including Blu-ray Disc players, gaming consoles, and set-top boxes. The TX-SR607 can receive and switch high-def media, such as HD broadcasts and Blu-ray Discs, and send a pure digital output to your HDTV. What's more, all multichannel audiofrom bit-for-bit streams to standard Dolby Digitalcan be input via HDMI for processing on the TX-SR607. HDMI version 1.3a enables CEC (Consumer Electronics Control) and offers greater bandwidth to deal with higher resolutions, 36-bit Deep Color, and high frame rates.
Control at your fingertips
Dolby Pro Logic IIz for a 3-Dimensional Sound Field
Dolby Pro Logic IIz offers the proven quality of Dolby Pro Logic IIx and adds a new vertical dimension to your home theater soundstage. As with previous versions of Dolby Pro Logic, this latest version delivers a convincing surround-sound experience from any movie or music source--even a stereo one. On the TX-SR607, Dolby Pro Logic IIz enables you to incorporate two "front height" speakers into your surround-sound set-up as an alternative to the two surround back speakers. The front height channels carry ambient, non-directional audio that helps immerse you even more deeply into your movies and games. With Dolby Pro Logic IIz, rain seems to burst from clouds right above you, and helicopters fly realistically overhead
A Full Range of the Latest High-Definition Surround-Sound Codecs
The TX-SR607 handles Dolby® TrueHD and DTS-HD Master Audio --two lossless decoding formats that enable delivery of a bit-for-bit soundtrack identical to the studio master track. Both codecs take advantage of the high data capacity of the Blu-ray Disc (BD) format. Another BD-related technology is DTS-HD Express, which provides access to secondary audio features. The TX-SR607 also handles two "lossy" audio formats: Dolby® Digital Plus and DTS-HD High Resolution Audio. Dolby Digital Plus is designed to accompany high-definition video delivered via disc media, broadcasts, and online content. DTS-HD High Resolution Audio, meanwhile, offers a greater bit rate, a higher sampling rate, and more channels than the core DTS technology.
A Suite of Audyssey Technologies for the Ideal Listening Environment
The TX-SR607 has three Audyssey technologies to help create the most suitable listening environment for your home. The first is Audyssey 2EQ for Room Acoustic Correction. The TX-SR607 uses Audyssey 2EQ to counter distortion created by walls, furniture, and other objects. This technology detects speaker distance, and then sets levels, delays, and crossovers, while also measuring room acoustics. Compared to one-position room correction systems, Audyssey 2EQ covers a much wider listening area. Moreover, it corrects problems in both frequency response and time domain (where most of the problems lie) across the entire listening area. The results are immediately obvious--a clear, well-balanced, and natural sound.
The second is Audyssey Dynamic Volume control. This technology allows you to set the volume level that you want and keep it there, without having to constantly adjust it. By anticipating sudden spikes and dips in the audio soundtrack and compensating for them in real time, Audyssey Dynamic Volume ensures consistent volume levels, regardless of the content you're enjoying. Thanks to Audyssey Dynamic Volume, quiet dialogue is easier to pick up, loud passages retain their impact, and commercials are less intrusive.
The third is Audyssey Dynamic EQ for Loudness Correction. In professional sound studios, music and movies are recorded at reference levels far louder than what is typical for home listening. As a result, when you play audio content at a low volume on a standard home theater receiver, the bass disappears, voices change in timbre, and the surround soundstage loses definition. To counteract this audio deterioration, Audyssey Dynamic EQ continuously adjusts frequency response and the surround soundstage loses definition. To counteract this audio deterioration, Audyssey Dynamic EQ continuously adjusts frequency response and surround levels to produce the ideal balance for a given volume level.
Includes HDMI Pass-Thru for connecting up to three video sources for output to a high-definition display
- Power output Front L/R: 90 W + 90 W (8 ohms, 20 Hz20 kHz 0.08%, 2 channels driven, FTC), 105 W + 105 W (8 ohms, 1 kHz, 0.7%, 2 channels driven, FTC), 110 W + 110 W (6 ohms, 1 kHz, 0.1%, 2 channels driven, FTC)
- Power output Center: 90 W (8 ohms, 20 Hz20 kHz, 0.08%, 2 channels driven, FTC), 105 W (8 ohms, 1 kHz, 0.7%, 2 channels driven, FTC), 110 W (6 ohms, 1 kHz, 0.1%, 2 channels driven, FTC)
- Power output Surround L/R: 90 W + 90 W (8 ohms, 20 Hz20 kHz 0.08%, 2 channels driven, FTC), 105 W + 105 W (8 ohms, 1 kHz, 0.7%, 2 channels driven, FTC), 110 W + 110 W (6 ohms, 1 kHz, 0.1%, 2 channels driven, FTC)
- Dynamic Power: 210 W (3 ohms, 1 ch), 180 W (4 ohms, 1 ch), 110 W (8 ohms, 1 ch)
- THD (Total Harmonic Distortion): 0.08% (1 W Output)
- Damping Factor: 60 (Front, 1 kHz, 8 ohms)
- Input Sensitivity and Impedance: 200 mV/47 k-ohms (Line)
- Output Level and Impedance: 200 mV/470 ohms (Rec out)
- Frequency Response: 5 Hz100 kHz/+1 dB, -3 dB (Direct mode)
- Signal-to-Noise Ratio: 106 dB (Line, IHF-A)
- Speaker Impedance: 6 ohms16 ohms
- Component Video Frequency Response: 5 Hz50 MHz, -3 dB
- Tuning Frequency Range: FM 87.5 MHz107.9 MHz, AM 530 kHz1,710 kHz
- FM/AM Preset Memory: 40 stations
- Power Supply: AC 120 V~, 60 Hz
- Power Consumption: 5.5 A
- Dimensions (W x H x D): 17.13 x 6.94 x 12.94 inches
- Weight: 23.8 lbs
Top Customer Reviews
I read extensive reviews on several brands and decided that I would purchas Onkyo. I went to Fry's looking for the 606 model. They were sold out and just received the 607. I purchased the 607.
I wanted something HDMI based that allowed audio through the HDMI cables. The thing was a snap to set up. Make sure to run an HDMI cable to your TV from the receiver so that you can do on screen programming.
As I said, I have 2 sub woofers and the 607 has two output RCA jacks to enable 2 subs. No more RCA splitters. I fired the thing up and was shocked at the sound quality. The thing sparkles and the lows are clean and deep. I adjusted the individual speaker levels with a Radio Shack db meter on an easy to use Onkyo menu. I did not use the calibration system built into the receiver. A few trips through the menus and you have them mastered. The menu system is REALLY SIMPLE.
Unless you have some REALLY expensive speakers, this is the unit for you. Great sound quality, simple setup and easy menus make this a good choice for the novice or mid range home theater enthusiast.
I highly recommend the unit.
UPDATE: I purchased two Klipsch Fortes to replace my Wharfdales. Now is see that this receiver REALLY rocks.
Someone mentioned that it does not have HDMI pass-through but this is incorrrect. It does. You have to flip the switch in the setup menu, but it is there. The upscaling for non-HD tv leaves something to be desired but otherwise I think it actually improved my HD viewing from my FIOS box.
My only negative so far if you can call it that was no XM interface, only Sirius. With the merger I'm hoping that won't be a big issue, but that is really not a major negative at all for me. Would have prefered that it had HD-Radio unit built in rather than HD-ready but again, don't listen to the radio that much. The remote could be better. I too hate having to push the receiver button, but once I get the universal programmed it'll go in the drawer with all the others.
I was down to this model vs. the Denon 1909, but after reading all the stories of how difficult it was to set up and the extra $71 off at checkout, this choice is really a no brainer. I have not run into any of the humming or running hot issues that so many have claimed on other Onkyo units. I'm starting to think this is a myth.Read more ›
Now for the downsides, only two as far as I have been able to ascertain: 1) Even though my new Panasonic G10 plasma says it complies with the CEC HDMI control protocol through Viera Link, it will not work with the Onkyo. It won't even work with a Panasonic BluRay player hooked up to the Onkyo via HDMI. Onkyo says their version, RIHD works with the Toshiba, Sony and Samsung versions, and should work with Viera Link, but it does not. So I bought an IR repeater and solved the problem of "behind the cabinet door" control, but I wish I didn't have to.
Problem #2: When having your CD player hooked up to the Onkyo with an optical digital cable, Zone 2 (which I use to power speakers I have poolside) does not work. If I connect using analog RCA jacks, Zone 2 works fine. But darn it, I want the best digital output in the house and would be fine with analog in Zone 2, but Onkyo doesn't even give me that choice.
And here is another minor annoyance: using the remote, if I punch the CD button (or any other source button), I have to push the "receiver" button again to adjust the sound. Why this extra step?Read more ›
Most Recent Customer Reviews
It's tricky to get all the speakers working well in surround sound. It's pretty hot so do turn it off when not used. Read morePublished 14 months ago by MGL
Really just OK. Used it as a receiver for my TV and 5.1 speakers. After 4 years of averaging 2/3 hours a day it developed problems with the HDMI ports .... Read morePublished 18 months ago by Duke
Hdmi didnt work but its used. seller accepted return. thank youPublished 21 months ago by Gustavo Parera
After a lot of reading and searching I bought the ONKYO TX-SR607 7.2 and it really sounded great! The set up was easy, the installation was no problem at all and it was very easy... Read morePublished 21 months ago by Guillermo Marranzini
Love the receiver. Bought in 2012 and its worked beautifully and provided amazing sound. we use most of the HDMI ports so I'm glad it has so many. Read morePublished 21 months ago by Kienbien
HDMI has failed and despite spending some money buying new capacitors and replacing them, the receiver is still broken after only 3 years. Read morePublished on January 1, 2014 by Raystafarian