Have one to sell?

Owens Corning Garage Door Insulation Kit

Available from these sellers.

Brand	Owens Corning
Style	Garage Door Insulation Kit
Item Weight	11.8 Pounds

About this item

This fits your .

Make sure this fits by entering your model number.

5 times better thermal performance, compared to an uninsulated door
As much as 20% reduction in perceived noise level
Installs in less than 1 hour (up to 9' door) - Only tools needed for installation are tape measure, utility knife, straight-edge and marker
The Garage Door Insulation Kit is designed for use on uninsulated metal garage doors. Flexible material resists denting
Cleanable vinyl surface (w/mild detergent)

› See more product details

Customer ratings by feature

Warmth

4.4

Easy to install

4.3

Value for money

4.0

See all reviews

New (12) from $95.84 & FREE Shipping

Customers who viewed this item also viewed

Page 1 of 1 Start overPage 1 of 1

More items to explore

Page 1 of 1 Start overPage 1 of 1

Customers who bought this item also bought

Page 1 of 1 Start overPage 1 of 1

Special offers and product promotions

Amazon Business : For business-only pricing, quantity discounts and FREE Shipping. Register a free business account

Have a question?

Find answers in product info, Q&As, reviews

There was a problem completing your request. Please try your search again later.

All Product Information Customer Q&A's Customer Reviews

From the manufacturer

Owens Corning 500824 Garage Door Insulation Kit

Owens Corning’s Garage Door Insulation Kit is a complete kit comprised of (8) durable R-8 fiberglass insulation panels with a tough,washable white vinyl facing.

The kit comes with a unique fastening system that provides a quick and secure method to hold the panels in place.

Each kit provides enough material to insulate a single car, garage door up to 9 feet wide x 7 feet 8 inches tall.

		Matador SGDIK001 Garage Door Insulation, Large, White	Ant NASA TECH White Reflective Foam Core 2 Car Garage Door Insulation Kit 18 Ft (Wide) x 8 Ft (HIGH) R Value 8.0 Made in USA New and Improved Heavy Duty Double Sided Tape (Also FITS 18 X 7)	M-D Building Products Available 3822 Vinyl Garage Door Top and Sides Seal, 30 Feet, White	32.8 Feet Long Garage Door Weather Stripping Top and Sides Rubber Seal Strip Replacement, Weatherproofing Universal Sealing Professional(White)	Garage Door U-Bottom Weather Stripping Kit Rubber Seal Strip Replacement, Weatherproofing Universal Sealing Professional Grade T Rubber,5/16" T Ends, 3 3/4" Width X 20 Feet Lenth (Black)

Customer Rating	(1435)	(1588)	(119)	(1299)	(535)	(1562)
Price	From $95.84	$88.99	$112.88	$20.35	$19.97	$20.97
Sold By	Available from these sellers	Amazon.com	Trade Winds / US Energy Products	Amazon.com	keeping fun us store	keeping fun us store
Size	22" x 54" (8 Panels)	Large	18Ft x 8Ft	One Size	33Ft	U shape 20FT

Compare with similar items

Product description

Size Name:22" x 54" (8 Panels)

Product Description

Owens Corning's Garage Door Insulation Kit is a kit comprised of (8) durable R-8 fiberglass insulation panels with a tough, washable white vinyl facing. The kit comes with a unique fastening system that provides a quick and secure method to hold the panels in place. Each kit provides enough material to insulate a single car garage door up to 9 feet wide. About Owens Corning, Owens Corning is a global leader in insulation, roofing, and fiberglass composite materials. Its insulation products conserve energy and improve acoustics, fire resistance, and air quality in the spaces where people live, work, and play. Its roofing products and systems enhance curb appeal and protect homes and commercial buildings alike. Its fiberglass composites make thousands of products lighter, stronger, and more durable. Owens Corning provides innovative products and solutions that deliver a material difference to its customers and, ultimately, make the world a better place. The business is global in scope, with operations in 33 countries. It is also human in scale, with 20,000 employees cultivating local and longstanding relationships with customers. Founded in 1938, it has been a Fortune 500 company for 64 consecutive years.

From the Manufacturer

Improve your garage's comfort with Owens Corning’s Garage Door Insulation Kit. A complete kit comprised of (8) durable R-8 fiberglass insulation panels with a tough, washable white vinyl facing. The kit comes with a unique fastening system that provides a quick and secure method to hold the panels in place. Each kit provides enough material to insulate a single car garage door up to 9-Feet wide.

Product information

Size Name:22" x 54" (8 Panels)

Technical Details

Manufacturer

Service Partners

Part Number

500824

Item Weight

11.8 pounds

Product Dimensions

22 x 54 x 2.25 inches

Item model number

GD1

Is Discontinued By Manufacturer

Size

22" x 54" (8 Panels)

Style

Garage Door Insulation Kit

Item Package Quantity

Certification

(unset)

Included Components

Garage Door Insulation Kit

Batteries Included?

Batteries Required?

Additional Information

ASIN

B002FR5QO6

Customer Reviews

1,435 ratings

4.5 out of 5 stars

Best Sellers Rank

#82,556 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement)
#54 in Weatherproofing Garage Door Seals

Date First Available

July 1, 2009

Feedback

Would you like to tell us about a lower price?

Product guides and documents

User Guide (PDF)

Specification Sheet (PDF)

Customer Questions & Answers

See questions and answers

Customer reviews

5 star		70%
4 star		17%
3 star		6%
2 star		3%
1 star		3%

How are ratings calculated?

Top reviews from the United States

There was a problem filtering reviews right now. Please try again later.

Amazon Customer

Gorilla Tape not optional

Reviewed in the United States on September 24, 2017

Size Name: 22" x 54" (8 Panels)Verified Purchase

Instillation of both kits went smoothly with two of us working together, and like everyone says, it took about an hour. It was obvious right away that the clips alone were not going to hold the insulation snugly in the door. One roll of white Gorilla Tape was sufficient to hold one kit. The taping added another hour to the whole process. The weight added to the door did slow the door marginally but not enough to stress the motor. Garage is much quieter and cleaner looking.

115 people found this helpful

Helpful

ChrisGeek

10 degrees cooler

Reviewed in the United States on July 29, 2016

Size Name: 22" x 54" (8 Panels)Verified Purchase

This product did manage to lower the temperature of the inside of the garage by 10 degrees in direct summer sun. I'd recommend using glue to attach the plastic pins. Also, the plastic pins need to be crosslinked for them to grip correctly. The pins by themselves do not hold the insulation well enough. I also had to use some white Gorilla duct tape (60 yards for a two car garage). For better insulation of your garage, you'll also need to make sure your attic above the garage is insulated. The insulation itself is great, but I'd like to see better attachment hardware included.

164 people found this helpful

Helpful

Good product with good results so far

Reviewed in the United States on January 16, 2018

Size Name: 22" x 54" (8 Panels)Verified Purchase

I have a three car garage with three separate garage doors (one 1.5x wide in front, one 1x wide in back, and one 2x wide in back). While I do not intend to make the garage a conditioned space, I did want to control the temperatures somewhat, since the temperature differential can be felt through the floor of the rooms above.

Initially, I purchased and installed Reach Barrier 3009 kits on each of the garage doors. While this took the edge off of the max garage temps (peaks around 85F, when it's 105F outside), I figured there was still quite a bit of improvement to be had. Since I really only considered getting garage door insulation products on Amazon, I quickly narrowed my search down to the Owens Corning 500824 kit, and a bunch of R-4'ish foam board products. While the 500824 costs more, it is still much cheaper than buying an insulated garage door.

I purchased 4 kits for my doors. Each kit consists of four, 2 sheet bundles, wrapped in clear plastic. This packaging method is less than ideal because it leaves wrinkles and some delamination on some of the edges of the vinyl. Fortunately, that wasn't a big deal because I managed to trim most of the imperfections off when cutting the panels to size. If you need to use more of the sheet, YMMV. I was pretty precise with my first couple panels, but determined that it was probably best to actually have them oversized by about 1/4" in each dimension as I went on. Cutting the sheets is a little bit of a pain, because of their thickness. I used a long straight edge and a box cutter, though there may be better ways to do it. I compressed the sheet on the facing, and cut along the straight edge to get a clean cut on both the facing and through the fiberglass. I recommend using a clean blade, since it gets messy if you snag the fiberglass. The kit includes gloves, and it's always a good idea to have long sleeves on when working with fiberglass. Depending on where you're cutting it, it's probably not a bad idea to have a mask or eye protection on, either.

The clips look pretty flimsy, but work fine in practice. I found what worked best for me was to clean the door surface, and apply the adhesive pad. If the door section didn't have the lock bar across it, it was best to put the door clips on first; while it was best to get the insulation sheet in place first if there was a bar. I used the box cutter to cut the square for the door clip with the sheet already in place. The 1x door took me about 50 minutes. With the learning curve out of the way, I found that the 2x door took about the same amount of time.

In an unlikely coincidence, Houston had uncharacteristically low temperatures (~20F) right after I installed the kits. The garage stayed in the 55-60F range, when it would normally be around 40-50F. I'm excited to see the results in the summer when I've also added new door seals and weatherstripping!

57 people found this helpful

Helpful

Kathryn Montgomery

Rapid, easy installation

Reviewed in the United States on September 14, 2019

Size Name: 22" x 54" (8 Panels)Verified Purchase

Our garage, where we have our workshop and laundry, is insulated EXCEPT for the door and floor. We even have HVAC ducts into the garage. After we considered whether to replace the door with an insulated model or to just put this project off for another winter or to use a retrofit insulation kit like this one, I convinced my husband to go with this insulation kit by buying it on Amazon without telling him about it until it was already on the way. This is so much less expensive than a new garage door, and I was able to install it by myself during my daughter's nap. It only took 30 minutes to install because the batts were already the correct size. I recommend using your own gloves instead of the ones included with the kit because the gloves had little pieces of insulation in them and made my hands itchy. Like others have mentioned, some white duct tape will go a long way in keeping the edges of the insulation in place. I'll do that next. I've included pictures of the clips that hold the insulation in place so you can get a better idea of how the system works.

36 people found this helpful

Helpful

Peter R

Not happy with this product

Reviewed in the United States on May 10, 2017

Size Name: 22" x 54" (8 Panels)Verified Purchase

Not the best option for insulating a garage door. Only (2) clips to hold up a 2' x 4' fiberglass panel. Photo is worth a thousand words! Sorry, photo came out sideways.
Lowe's has solid panels that are my next option.

67 people found this helpful

Helpful

L.A.G.

This is no Joke .. IT WORKS!

Reviewed in the United States on January 21, 2018

Size Name: 22" x 54" (8 Panels)Verified Purchase

the hardest part about this product is opening the box! (really glued strong..lol)) Super easy to put in, took less then 1/2 hour to do a two car garage. Had child labor help so he could feel like he made a contribution, but honestly didn't need it. Would highly recommend wearing gloves and using a box cutter or razor safety blade to cut the ends to fit. The panels come already to fit the standard width but you may have to trim the length as I did. they provided clips, sticky squares to set clip one and the second clip to "lock in", they also provided a pair of plastic gloves but with small hands I found it easier to use my own. If you can wear a mask (just the smart thing to do when your around any kind of fiberglass). It was -2 outside when I installed and my garage temp was 29 and I was very worried about the pipes freezing, that night (about 8 hrs later & running a plug in heater for a couple hours) my garage temp had risen to 40 degrees and outside was -10 with wind chill. The garage never dropped below 39 degrees the entire week we were in sub zero temps, ice and snow!! I had not had a single worry since then about the pipes and outside the initial heat warm up I haven't ran it since. HIGHLY RECOMMEND

25 people found this helpful

Helpful

Top reviews from other countries

Customer

WORK AS ADVERTISED, REDUCES NOISE AND INSULATES

Reviewed in Canada on December 1, 2016

Size Name: 22" x 54" (8 Panels)Verified Purchase

I tried a few cheap Styrofoam solutions that were very time consuming and labor intensive - none of which resolved the problems of blocking outside heat and cold from effecting temperature inside the garage.

This solution from Owens-Corning may seem a bit pricy but is not when you factor in all the time and materials of other products. It installs as easy as it says, and just plain works.

I like others opted to use additional edge tape to insure no sag down the line. It was about forty minutes to install on the first door of two, after having the experience of one door behind me, the second took about 25 minutes.
Outside temp 78 F
Sunlight direct on garage doors temp 111 F
Inside garage 84F
Temp on inside garage door insulation panel 86 F

I highly recommend this as a solution to creating a thermal barrier on the garage doors

17 people found this helpful

A. W.

Perfectly designed

Reviewed in Canada on October 18, 2018

Size Name: 22" x 54" (8 Panels)Verified Purchase

I've installed this product for two separate customers. It is easy to install, and the design simple yet very effective. The only item I would suggest you add to this kit is double-sided tape. Most garage panels will have channels on three sides of the panel, with the fourth side being a straight edge. Applying double-sided tape on the straight edge helps keep the insulation in place better than if installed with the two clips and three channels per panel. Other than that, excellent product that I will use again.

4 people found this helpful

Not durable, messy, better options out there.

Reviewed in Canada on November 26, 2018

Size Name: 22" x 54" (8 Panels)Verified Purchase

Product is not the greatest, fiberglass makes insulation installation messy, the video is a misconception. Very handy and do not cut 1' more unless you have deep panels to shove it into. If you dont have panels on your gagre door, dont buy it. You can also use duct tape for more security. I will be returning my item for something more cleaner, less weight, and durable

5 people found this helpful

Ahmed Tayyib

Don't waste your money

Reviewed in Canada on February 21, 2019

Size Name: 22" x 54" (8 Panels)Verified Purchase

This one does not give you a good insulation value. You could go to a home hardware and purchase cheaper insulation with better R rating. I only found out after I visited my local home hardware store. But by then I had already installed it. I was disappointed to learn I could have saved money with better R value insulation which would have been easier to install. The box came with everything advertised. However, after sometime the clips may fall. Also, I used a lot of tuck tape to ensure this remains sealed. Sometimes though, I think I did not use enough.

2 people found this helpful

Alan P.

Insulation good, mounting type useless …

Reviewed in Canada on May 13, 2019

Size Name: 22" x 54" (8 Panels)Verified Purchase

The insulation is good, seemed to work well in the winter. The mounting system on the other hand is crap. The adhesion two sides bits of tape seemed to work well in the winter, but as soon as we had sun hit the doors a couple of weeks ago (spring) everything has started coming loose. I may as well bought loose fibre glass and glued strips of plywood to staple plastic and encase the fibre glass.

2 people found this helpful