|Item model number||PH-EC300PTG_BK|
|Item Weight||13.2 pounds|
|Product Dimensions||15.7 x 7.8 x 17.7 inches|
|Item Dimensions L x W x H||15.7 x 7.8 x 17.7 inches|
|Is Discontinued By Manufacturer||No|
|Date First Available||September 11, 2017|
Other Sellers on Amazon
+ Free Shipping
+ Free Shipping
+ Free Shipping
Phanteks Eclipse (PH-EC300PTG_BK) Steel ATX Mid Tower Tempered Glass Case, Black
- Make sure this fits by entering your model number.
- Full Metal exterior design. Clean interior-PSU cover & HDDs. Tempered glass panel. Unique exterior design with integrated PSU cover
- Fully Equipped with Magnetic Dust filter. Long GPU (supports up to 15. 2in). Full Size PSU support. Equipped with 1x Phanteks 120mm fans. Front I/O (2x USB 3. 0, Headphone, Mic, LED control)
- RGB Power Light + Ambient Down Light (10 colors). Integrated RGB Illumination modes + sync with RGB motherboards/Phanteks RGB products
- High flow. 2x front loaded 3. 5" Hdd. Supports up to 240/280mm radiator in front. 2x SSD mounting Location (1x included)
- Dimension: 200 mm x 450 mm x 400 mm/7. 8 in x 17. 7 in x 15. 7 in (WxHxD). Mid Tower. Motherboard Support: ATX, uATX, mITX, (E-ATX* - up to 275mm wide)
Frequently bought together
Customers who viewed this item also viewed
What other items do customers buy after viewing this item?
Have a question?
Find answers in product info, Q&As, reviews
Your question may be answered by sellers, manufacturers, or customers who purchased this item, who are all part of the Amazon community.
Please make sure that you are posting in the form of a question.
Please enter a question.
The new eclipse P300 continues to set new standards in quality for budget-friendly enclosures. It introduces an all new Framework that further enhances clean interior and exterior design with intuitive and convenient installation. Exceptional build quality in its class, featuring a full metal exterior with a tempered glass side panel. Everything you need to build your perfect system.
There was a problem filtering reviews right now. Please try again later.
-1st, the top case dust cover has weak magnets. Not a deal breaker, but would be nice to have higher quality.
-2nd, the vents on the front of the case are too small. I had to put larger air intake fans to ensure enough air flow was cooling the CPU & GPU. I don't stress my machine too often, so this case works for me. If you do, then i would recommend looking at other cases or take off the front panel.
Overall, this is a quality case for the mid-level price point. If your looking for something cheaper with some style. then this will check that box for ya. However, it comes with the above drawbacks.
Eventually Phanteks will make a product i cannot give 5 stars.
Things to note is that Air Flow is limited for an A.I.O. I would strongly say this is a good air cool case and if you are gonna use an A.I.O get fans that can move air at a high rate or very decent static pressure fans. (XSPC 120mm 4 pack for $26.00 is my recommendation.) The rear fans is a lot better than I first thought. Moves a decent amount of air but cannot be counted on to do the entire case.
Noise levels are what you make them but the case is not sound proof so be sure you set up for sound in mind of your a silence freak.
My last point is the looks. SEXY A F. Job done. I give this case a solid buy to anyone who needs a $60.00 case and don't wanna hassle with extras.
Oh yeah. Tempered Glass at $60.00!!!!
Top international reviews
You can read the full description of the features online but some things to note below:
- the case only comes with a single 120mm Phanteks fan. I strongly advise you to add at least two additional intake fans at the front (140mm fans can be fitted but 120mm will be fine as well).
- cable management is pretty good. There are three included velcro straps in the case, lots of cable tieing points and Phanteks include a good assortment of screws and cable ties with the case.
- the case features a reset button - a plus for me
This said, there are some minuses as well given that this is, after all, a budget case. The front panel on mine has slightly uneven gaps where it meets the steel frame on either side which suggests QC isn't a huge priority for this line of (budget) cases. The steel is quite thin and the HDD caddies are a bit flimsy. My previous case was definitely built better and out of better materials even though it was slightly cheaper.
Overall, I am happy with my purchase. I have attached some photos and a video showing my complete build (R5 2600 OCed to 4GHz, RX5700XT OCed to 2000MHz core, 16GB ram a couple of NVMe SSDs and 2x2.5inch HDDs)
Very good looking
Premium built quality
Good cable management
Comes with RGB LED power switch and side panel indicator.
Front cover allows minimalist design but poor air flow. If you mount your radiator (Watercooling) the only choice is to suck air into case and pass the heat onto the inside of the case. If trying to blow hot air out via the front it will be stopped by the front face cover and then heat will seep back into case rather than the top and bottom vent.
Only comes with one SSD caddy
No reset button, only power button.
If you need a stylish case with little budget then this case is fantastic. But if you are looking to overclock or heavy gaming and need radiator (Watercooling) then go for another case.
PS the top mount will not give clearance for radiator with fan inside the case. May be radiator inside and a fan outside which makes this case ugly
Only comes with 1 Fan
Basement area is a bit cramped for space as the 3.5" drive bays are there, you'll need a fully or semi modular psu to be able to close the side panel without getting a slight bulging out from cable build up (or something like my Corsair VS450 which is non modular but short so I can stuff the cables away easier.)
One issue I've had is the holes that allow cables to pass through are a bit tight especially for the motherboard 24 pin, it's a bit of a struggle to fit the connectors through.
All in all, a good case for the price, you won't find much better tempered glass cases at this pricepoint
The design is great with really good cable management, I have a really clean looking build with all the cables tucked away, if I had a criticism it would be that some of the cable slots around the motherboard mounts are really tight, everything slotted in to place but it felt like there was barely a mm to spare.
There are two mounts at the back of the case for SSDs or 2.5in HDDs and room for two 3.5in drives, all hidden out of the way nicely.
Airflow seems to be good, with the front and top fan positions having decent dust filters, the case doesn't get hot, I've maxed out on case fans. The case comes with one fan, though I swapped it out immediately so no idea what it is like.
The glass side panel is a magnet for finger prints but is good quality and shows plenty of innards if you're into that sort of thing.
My primary reason for buying the case was it's 400mm depth, couldn't seem to find many cases of that depth, this one fit the bill perfectly.
I wouldn't hesitate to recommend this case.
One slight disappointment, there is only 1 SSD holders when there are enough screws for 2, not a massive problem as you can buy more for like £5 with break out cables and screws.
The end result looked fantastic, i added a Evo 212 cooler and a phanteks RGB strip which connects to the case itself and is controlled by a button on the top of the front IO which made the build look even better.
The only bug i had while building in this case is that the screws that hold the tempered glass in are seriously short, maybe 2 full turns and they are off, they also are quite fiddly and tend to roll under the sofa if you don't catch them.
It only comes with 1 exhaust fan so i do advise anyone who is thinking about building in it to get 2 very good 140mm fans for the intake, be quiet silent wings 3 would fit nicely and be quiet as a church mouse. (the front just pulls off easily to mount the fans)
For the price its an amazing case to work in and if you utilise the cable management holes you can make a very clean sexy build.
overall it is an amazing case, great dust filters they work great, nice cable management sections, to keep it nice and clean, hard drive cage placement is nice, easy to access but also out of sight, to not ruin the aesthetics of the build
I wish the power button was slightly more recessed to prevent accidental presses.