Pump Handbook 4th Edition

reference material that is good to have

Please also see my review of the "Engineers Guide to Centrifugal Pumps" also by Igor Karassik. I first bought the Second Edition of the Pump Handbook many years ago (1985) thinking that it contained everything I would need to know. Looking back, I am embarrassed to think that new technologies would not impact the pump world; how wrong is that? Further, as luck would have it, I was wrestling with a problem related to rotodyanamics (Reed Critical Analysis of a line shaft pump). Add to that the fact that I had now been working with positive displacement pumps of all flavors and colors. The Fourth Edition address those exact same issues. And as a bonus, throws in a review of quite a comprehensive selection of different applications for a vast array of environmentally different service conditions (different industrial applications and environments). Then, if all else fails, this book is big and heavy enough to suffice as a non-concealed weapon in almost any circumstance.

An industry standard for decades, this one was a gift to a colleague (young guy) who was impressed by information I would pull out of my 1st edition copy.

This 1632 page publication is loaded with useful information on every important facet of pump theory, performance, design, and application. Centrifugal (radial, mixed-flow, and axial flow impellers), positive displacement, solids handling, and jet pump types are covered. Special chapters are devoted to pump drives, seals, bearings, materials of construction, mechanical behavior, vibration, noise, troubleshooting, installation, operation and maintenance, intakes and suction piping, pumping systems and system characteristics, abnormal operation, waterhammer, and selecting and purchasing pumps. There is also a chapter covering pump services with sections for the main industry, utility and commercial areas of application such as power plants, water supply, petroleum, and chemicals to name a but few. There are over one hundred industry name contributors to this book. Dr. Paul Cooper, a principal author, has many pump technical papers to his name and is one of the preeminent pump engineers in the world. This handbook contains a wealth of valuable information, is very reasonably priced and is the first one I would recommend to anyone looking to buy a reference book on pumps.

I needed both an overview and detailed information on certain aspects of pump behavior. This book provided both to me. It's very thick, but it has to be since it covers so much material.

I loved it. World class pump design book. Would recommend everyone in the pump design industry to buy this book.

Great book...a classic...on the subject of pump design. All the necessary content to make design or problem resolution possible for those less familiar.

I received this book in Brazil with just one week.
It has great information about pumps and its a hard book to find.