Corsair Hydro Series H150i PRO RGB AIO Liquid CPU Cooler, 360mm Radiator, Triple 120mm ML Series PWM Fans, Advanced RGB Lighting and Fan Software Control, Intel 115x/2066 and AMD AM4 com
|Noise Level||25 dB|
About this item
- Make sure this fits by entering your model number.
- Customizable RGB backlit pump head produces vivid lighting effects to match your build. Air flow - 47. 3 CFM. Noise level - 25. 0 decibels
- Powered by magnetic Levitation: three Low-Noise 120mm ML series magnetic Levitation PWM fans deliver incredible airflow and produce just 20 dB of noise at full speed
- Powerful software: Corsair iCUE software allows you to adjust RGB lighting, individual fan speeds, and pump speed while monitoring CPU and coolant temperatures
- Zero RPM mode: zero RPM cooling profiles allow fans to stop entirely at low temperatures, completely eliminating fan noise
- Compatible Sockets: Intel LGA 1150, 1151, 1155, 1156, 1366, 2011, 2011-3, 2066 and AMD AM2, AM3, AM4, FM1, FM2.
- Fan Dimensions-4. 7 x 0. 9 inches
There is a newer model of this item:
Frequently bought together
Have a question?
Find answers in product info, Q&As, reviews
Your question might be answered by sellers, manufacturers, or customers who bought this product.
Please make sure that you are posting in the form of a question.
Please enter a question.
From the manufacturer
BE SEEN, NOT HEARD
The CORSAIR Hydro Series H150i PRO is an all-in-one RGB liquid CPU cooler with a 360mm radiator built for low-noise cooling and bold styling with an RGB LED pump head.
DYNAMIC MULTICOLOR RGB LIGHTING
Vibrant RGB LED pump head produces vivid lighting effects to match your build.
POWERED BY MAGNETIC LEVITATION
Three low-noise 120mm ML Series magnetic levitation PWM fans deliver improved airflow and produce just 25 dBA of noise at full speed.
CORSAIR iCUE software allows you to adjust RGB lighting, individual fan speeds, and pump speed while monitoring CPU and coolant temperatures, and more.
ZERO RPM MODE
Zero RPM cooling profile in CORSAIR iCUE software allows fans to stop entirely at low temperatures, eliminating fan noise.
Compare with similar items
Corsair QL Series, iCUE QL120 RGB, 120mm RGB LED PWM White Fan, Triple Fan Kit with Lighting Node Core
Corsair ML120 PRO 120mm Premium Magnetic Levitation RGB LED PWM Fan with Lighting Node 3 Pack,CO-9050076-WW
Corsair ML120, 120mm Premium Magnetic Levitation Fan (2-Pack)
Corsair iCUE SP120 RGB Pro Performance 120mm Fan, Single Pack
Noctua NF-P12 redux-1700 PWM, High Performance Cooling Fan, 4-Pin, 1700 RPM (120mm, Grey)
|Sold By||PandaVida Inc||Amazon.com||Amazon.com||SpaceBound||Amazon.com||Noctua Cooling Solutions|
|Item Dimensions||18.66 x 5.75 x 7.28 inches||4.72 x 4.72 x 0.98 inches||4.72 x 4.72 x 0.98 inches||4.8 x 2.2 x 5.9 inches||6.02 x 5.24 x 1.36 inches||4.72 x 0.98 x 4.72 inches|
|Item Weight||5.34 lbs||1.13 lbs||1.34 lbs||0.74 lbs||4.76 ounces||0.53 lbs|
The CORSAIR Hydro Series H150i PRO is an all in one RGB liquid CPU cooler with a 360mm radiator built for low noise cooling performance and bold styling with an RGB LED pump head. Three included 120mm ML Series magnetic levitation PWM fans provide great airflow while producing no more than 25 dB of noise, pushing the performance of your build while staying whisper quiet. Take control with CORSAIR iCue software and customize lighting, monitor temperatures and precisely adjust fan speeds, or stop the cooling fans entirely with the H150i's Zero RPM fan mode. Easy to install and compatible with most modern CPU sockets, the H150i makes it easy to cool your system in silence and style. Cold Plate Material : Copper and Radiator Material : Aluminum.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Now, that all sounds dandy, but how does it actually work? Well, when I finished installing my H100i Pro (the 240mm version with 2 120mm fans), my initial temps were only about 2 deg C better at rest compared to my previous CryOrig H7 air cooler, and about 7 deg C better under Prime95 load for my 8700k cpu (I used Grizzly Kryonaut as my thermal paste). A bit puzzled, I began looking into the iCUE settings and saw that I could set things to either Quiet, Balanced, Extreme or Zero RPM, but only for the fans. I saw in iCUE that the pump was running at about 1080 rpms but I could not click on it to set to a different speed or seem to adjust it. And when I put my head very close to the pump inside the case, I heard just the faintest whirling. Finally, after posting a question about pump speeds at the Corsair User Forums, I found that you need to go to the Performance tab on the left, then set it to another setting (it initially is set to "Quiet"), and then you can see the pump appear as an entry on your right that you can change. Then you can click on the fans or the pump and set them to Quiet, Balanced, Extreme or Zero RPM (which means the fans are not turning but the pump is still spinning - very quiet and almost passive water cooling).
At this point, I think it is important to note that at no place in the included instructions is there ANY mention that the pump is initially set to "Quiet" mode, or how to change the pump speed, or how to setup the H100i Pro with iCue !!! (I am using iCUE 3.6.109) Without being mean to Corsair, this is extremely poor. And no doubt, many people will buy this unit, see not much improvement and then return it, never realizing that the pump is set too low to begin with.
When I then put my pump into "Balanced" mode, it went from 1080 rpms up to 2150 rpms and the temperatures immediately started to drop. Now, temps are about 5 deg C cooler at desktop rest and about 15 deg C cooler under Prime95 loads. In "Extreme" mode, the pump ramps up to 2950 rpms and my resting desktop temps are about 7 deg C lower and my Prime95 temps are about 20 deg C lower for my Intel 8700k cpu. Big difference. (For day to day use, I keep my pump and fans set to "balanced" mode.) The fans also are high quality and I do not notice them until they spin faster than about 1800 rpms. (they go up to 2450 rpms) It is also great that there is a preset temperature lighting effect that you can set for the waterblock/pump head LED Corsair logo that changes from green to yellow to red based upon the temps you set for the internal coolant.
So, once the kinks were worked out and I had everything set correctly, then the H100i Pro performed admirably. I have only been using my H100i Pro for one month so far, so I cannot say if Corsair changing the pump design is going to result in increased reliability. I can say that they should have stuck with larger 3/8 or 1/2 inch inner diameter coolant tubes (more water, can hold more heat), and they should have made those tubes enter the waterblock/pump head directly for less flow restriction. With the H100i Pro, the small little 1/4 inch tubes enter at cheap plastic 90 degree couplings that will hurt flow and increase temperatures (and increase pressure for the pump, leading to less life).
Because of these small design flaws and the cluster$#@! lack of iCUE instruction on how to set the pump to higher RPMs in the instruction manual, I am deducting one star. Time will tell, and I will come back and update this review, but right now I would say that this is a good AIO cooler that needs a more detailed instruction manual and a few small design changes. 4 out of 5 stars for me.
This has been the worst customer experience i have ever had. They make a custom bracket so your Asetek one wont work and your dead in the water. I have a 3000$ computer that cant be used because i dont have anyway to attach the cooler to it and no end in site. I could get my bracket tomorrow, or never if the part has been discontinued. Who knows no one from Corsair will talk to me...
The first cooler I got was filled with air, the pump was loud as hell because of all the bubbles going through the motor. Shaking the cooler while it was running and trying to let it settle did nothing to help. I got an exchange and the new one is much better.
The pump DOES make a whirring sound, so if you're looking for absolute silence and have sensitive hearing, you may hear the pump at times. The maglev fans are insane. They make almost no noise and the zeroRPM feature is great.
Now how about the actual cooling performance? I had a Noctua NH-U14S and the Corsair 1151i PRO gets 10C cooler at idle, and an entire 20C cooler at max load.
Reference numbers for those that care:
NOCTUA: 40C (idle), 75C (max load).
CORSAIR H115i PRO: 30C (idle), 55C (max load).
This helps keep ambient temperature inside the case low, and I'm now at 4.8Ghz that peaks at 68C.
Yes... I saw at the very worst a 20C temp drop. Granted I did change my thermal paste from arctic silver to MX4 as well, so take that into consideration.
It's dead silent even when the fans are at max. It's hard to not be impressed by this baby. Take care of your CPU and I would recommend MX4. It's one of the best thermal pastes you can get that's not electrically conductive.
If I had to guess I would say this is about a fifth as loud as my Hyper 12EVO fan at max rpm. It really doesn't even have to spin past 80% max to keep temps below 70C.
Gigabyte Works Z270 Gaming 5
(Don't buy this POS MOBO)
i7-7700k (4.8Ghz on 4 cores at 1.32V)
MX-4 Thermal paste, full coverage blob method
Zotac AMP! 1080 Ti
By Tyler Monroe on January 22, 2018
Top reviews from other countries
Wasserkühlung verunreinigt mit Wärmeleitpaste, unvollständige und fremde Zubehörteile,
die Abstandshalter passen vom Gewinde nicht, keine Anleitung und so weiter und sofort.
Unter den Voraussetzungen ist es schier unmöglich einen korrekten Einbau durchzuführen. AlexWa!
Als ich mir dann den Radiator der Wasserkühlung angeschaut habe, waren dort Staubspuren von den Lüfter zu sehen, verbogene Lamellen am Radiator, gebrauchsspuren an den Schraubenlöchern und an der unterseite vom Kühler.
Es fehlten meines achtens auch Teile und eine Anleitung.
Das ist jetzt leider schon der zweite Arktikel ( Der erste war ein Babyphone) der als neu bestellt, aber als gebraucht ankam.
Instruction manual is very good with this product and details exactly what to do so don't be worried.
Easy to install and great colour changing options.
To change the colour of block just download the Corsair ICUE software
the unit is well made and just feels good quality
i am happy that the fans arent glowing rgb colours, its only the pump that lights up and thats just right for me, rgb fans on top of the rig will put me off gaming for sure
also it is worth noting, if you are looking at this cooler because its one of the quieter ones... the fans are mag-lev fans and are supersilent...however the noise level of the pump itself is the nosiey bit... all in all much more tolerable noise level than the wraith prism cooler it replaced. whilst its one of the best cpu fans... it was quiet enough until the computer knew i had beaten it then it would spin like crazy!
this cooler is just gently working away at a steady pace nice and quiet. no problems with temperature whatsoever. cool and quiet.
fitted to a Ryzen 7 2700x on asus prime x470 pro mobo with 64gb ram
Reviewed in Italy on March 14, 2019