![VICSEED Upgraded Magnetic Phone Mount for Car, [Big Rear Mirrors Friendly] Rear View Mirror Phone Holder, Strong Magnet Cell Phone Holder Car Cradle Hands Free Car Mount Fit All Mobiles & Vehicles](https://m.media-amazon.com/images/I/71SVSY3vQQL._AC_UL140_SR140,140_.jpg)
![VANMASS [Pro Version] Universal Car Phone Mount [Super Suction Cup] Dashboard Phone Holder Stand, Handsfree Windshield Dash Air Vent Phone Holder Car, Compatible with iPhone 13 12 Samsung LG & Truck](https://m.media-amazon.com/images/I/71uTRTNVe8L._AC_UL140_SR140,140_.jpg)
![VANMASS [Upgraded] Cell Phone Holder Car [Anti-Slip Soft Silicone & Powerful Suction] Dashboard Windshield Universal Phone Car Mount, Compatible with iPhone 14 13 12 11 Pro Max &Truck/SUV/Jeep (Gray)](https://m.media-amazon.com/images/I/71VUsbK5xmL._AC_UL140_SR140,140_.jpg)
I will go over what I liked and dislike about this product. First, if it weren't for the cheap plastic parts, this item would be phenomenal.
I like the phone clamp mechanism, as it holds my phone very securely with internal springs. I also like the clamp on the other end, as once torqued, the arm doesn't move much. but beware of over-tightening as that wears the gray rubber bushing quickly.
Now unfortunately, it's the parts in between that make this product questionable in quality of design, the two elbow joints. Because of the cheap nature of the design that those silver painted caps ARE the primary components that not only keep the arm in one piece, but also provide the friction grip to keep the phone clamp in place once adjusted, just reeks of "cash-grab designed failures".
My solution? Drill straight through the elbow joints as centered as possible with a small drill bit. I recommend no bigger than 1/8th in size, and thread in a equal sized screw-bolt with flat washers on both side caps, and either a lock nut, or like in my case, double nuts to lock the elbow caps in place. But keep a little play on the bolt as you don't need to tighten the caps into their holes too hard, but just keep them from popping out of place.
I am the kind of person who will find a way to fix something until it falls apart in a way that can't be fixed with some glue, screws, or nuts and bolts. I WILL get my money's worth out of this product long after the company that made it goes out of business, just out of spite for this kind of engineering.
If others are willing to use my solution to the problems with this product, and even preempt the problem as soon as you get it, this is sure to last many months or years if treated with care, and tenacious spite for the poorly thought out design decisions of it's creators.
I hope this is helpful, and informative, and remember, just because it's cheap in some ways, doesn't mean it isn't without a solution to fix it into a quality product.
Consider this Amazon's Choice product that delivers quickly
Amazon's Choice
Buy it with
- +
- +
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Compare with similar items
 | PKYAA Rearview Mirror Phone Holder for Car, 360° Rotating Rear View Mirror Phone Mount, Multifunctional Mount Phone and GPS Holder Universal Car Phone Holder for All Smartphones | WIESSOC Rearview Mirror Phone Holder for Car, 360° Rotating Car Phone Holder Mount, Universal Cell Phone Holder, Cell Phone Automobile Cradles and GPS Holder | HOLDCY Car Phone Holder Mount, 360 Degrees Rotate Adjustable Suspension Mount Phone Holder, Multi-Function Rearview Mirror Cell Phone Holder for All Mobile Phones | Frienda 360° Rearview Mirror Phone Holder, Universal Car Phone Holder Mount Car Rearview Mirror Mount Phone and GPS Holder, Car Phone Mount Clip Suitable for Most 4-6.1 Inch Mobile Phones (Black) | |
|---|---|---|---|---|---|
| Customer Rating | (1725) | (1944) | (110) | (858) | (1863) |
| Price | $8.99 | $12.99 | $7.49 | $11.65 | $4.99 |
| Shipping | FREE Shipping on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime | FREE Shipping on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime | FREE Shipping on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime | FREE Shipping on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime | FREE Shipping on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime |
| Sold By | CHJJNY | PKYAA | US-Xing | HOLDCY | Fiada US |
| Brand Name | LYW | PKYAA | WIESSOC | HOLDCY | Frienda |
| Compatible Devices | Smartphones | Smartphones | Smartphones | Smartphones | Smartphones |
| Compatible Phone Models | iPhone 12 | Smartphones | iPhone | Smartphones | Univerasl |
| Compatible with Vehicle Type | Automobile | Automobile | Automobile | Automobile | Automobile |
| Mounting Type | Rearview | Rearview | Wall Mount | car rearview mirrors, car rear seat | Rearview |
| Special Features | Adjustable, Rotatable | Rotatable | Adjustable | Lightweight design, suitable for 3-7 inch mobile phones, can be installed on the rearview mirror and car rear seat (tips: this mobile phone holder can be used at home); A 360° up and down rotating and small rotation left and right joint gives you the ideal viewing angle and allows quick switching between portrait and landscape view | Adjustable |
| Unit Count | 1 | 1 | 1 Count | 1 | 1 |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
0:15
Click to play video
Car Rearview Mirror Phone Holder
CHJJNY
Videos for related products
0:38
Click to play video
Car Phone Holder Mount,360 Degrees Free Rotate Adjustable
HOLDCY
Videos for related products
3:41
Click to play video
Rotatable and Retractable Car Phone Holder
Frank Plascencia
Videos for related products
1:32
Click to play video
New 360 Rearview Mirror Phone Holder
Lasciato
Videos for related products
0:18
Click to play video
DOUBFIVSY Car Phone Holder + USB Cable
DOUBFIVSY
Videos for related products
0:58
Click to play video
Rearview Mirror Phone Holder
ANSTUGLE
Videos for related products
0:29
Click to play video
car phone holder
USA fine life
I will go over what I liked and dislike about this product. First, if it weren't for the cheap plastic parts, this item would be phenomenal.I like the phone clamp mechanism, as it holds my phone very securely with internal springs. I also like the clamp on the other end, as once torqued, the arm doesn't move much. but beware of over-tightening as that wears the gray rubber bushing quickly.Now unfortunately, it's the parts in between that make this product questionable in quality of design, the two elbow joints. Because of the cheap nature of the design that those silver painted caps ARE the primary components that not only keep the arm in one piece, but also provide the friction grip to keep the phone clamp in place once adjusted, just reeks of "cash-grab designed failures".My solution? Drill straight through the elbow joints as centered as possible with a small drill bit. I recommend no bigger than 1/8th in size, and thread in a equal sized screw-bolt with flat washers on both side caps, and either a lock nut, or like in my case, double nuts to lock the elbow caps in place. But keep a little play on the bolt as you don't need to tighten the caps into their holes too hard, but just keep them from popping out of place.I am the kind of person who will find a way to fix something until it falls apart in a way that can't be fixed with some glue, screws, or nuts and bolts. I WILL get my money's worth out of this product long after the company that made it goes out of business, just out of spite for this kind of engineering.If others are willing to use my solution to the problems with this product, and even preempt the problem as soon as you get it, this is sure to last many months or years if treated with care, and tenacious spite for the poorly thought out design decisions of it's creators.I hope this is helpful, and informative, and remember, just because it's cheap in some ways, doesn't mean it isn't without a solution to fix it into a quality product.
Images in this review
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States 🇺🇸 on July 31, 2022
Size: 1Verified Purchase
I will go over what I liked and dislike about this product. First, if it weren't for the cheap plastic parts, this item would be phenomenal.
I like the phone clamp mechanism, as it holds my phone very securely with internal springs. I also like the clamp on the other end, as once torqued, the arm doesn't move much. but beware of over-tightening as that wears the gray rubber bushing quickly.
Now unfortunately, it's the parts in between that make this product questionable in quality of design, the two elbow joints. Because of the cheap nature of the design that those silver painted caps ARE the primary components that not only keep the arm in one piece, but also provide the friction grip to keep the phone clamp in place once adjusted, just reeks of "cash-grab designed failures".
My solution? Drill straight through the elbow joints as centered as possible with a small drill bit. I recommend no bigger than 1/8th in size, and thread in a equal sized screw-bolt with flat washers on both side caps, and either a lock nut, or like in my case, double nuts to lock the elbow caps in place. But keep a little play on the bolt as you don't need to tighten the caps into their holes too hard, but just keep them from popping out of place.
I am the kind of person who will find a way to fix something until it falls apart in a way that can't be fixed with some glue, screws, or nuts and bolts. I WILL get my money's worth out of this product long after the company that made it goes out of business, just out of spite for this kind of engineering.
If others are willing to use my solution to the problems with this product, and even preempt the problem as soon as you get it, this is sure to last many months or years if treated with care, and tenacious spite for the poorly thought out design decisions of it's creators.
I hope this is helpful, and informative, and remember, just because it's cheap in some ways, doesn't mean it isn't without a solution to fix it into a quality product.
I like the phone clamp mechanism, as it holds my phone very securely with internal springs. I also like the clamp on the other end, as once torqued, the arm doesn't move much. but beware of over-tightening as that wears the gray rubber bushing quickly.
Now unfortunately, it's the parts in between that make this product questionable in quality of design, the two elbow joints. Because of the cheap nature of the design that those silver painted caps ARE the primary components that not only keep the arm in one piece, but also provide the friction grip to keep the phone clamp in place once adjusted, just reeks of "cash-grab designed failures".
My solution? Drill straight through the elbow joints as centered as possible with a small drill bit. I recommend no bigger than 1/8th in size, and thread in a equal sized screw-bolt with flat washers on both side caps, and either a lock nut, or like in my case, double nuts to lock the elbow caps in place. But keep a little play on the bolt as you don't need to tighten the caps into their holes too hard, but just keep them from popping out of place.
I am the kind of person who will find a way to fix something until it falls apart in a way that can't be fixed with some glue, screws, or nuts and bolts. I WILL get my money's worth out of this product long after the company that made it goes out of business, just out of spite for this kind of engineering.
If others are willing to use my solution to the problems with this product, and even preempt the problem as soon as you get it, this is sure to last many months or years if treated with care, and tenacious spite for the poorly thought out design decisions of it's creators.
I hope this is helpful, and informative, and remember, just because it's cheap in some ways, doesn't mean it isn't without a solution to fix it into a quality product.
Images in this review
