|Item Weight||18.6 pounds|
|Product Dimensions||13 x 15 x 15 inches|
|Item model number||50-150|
|Item Package Quantity||1|
|Warranty Description||5 Year Warranty|
Rikon 50-150 Belt/Disc Sander, 1-Inch by 30-Inch
We don't know when or if this item will be back in stock.
- Enter your model number to make sure this fits.
- Powerful 1/3-horsepower fan-cooled motor is totally enclosed
- Motor spins five-inch disc at 3,450 RPM and the one-inch by 30-inch belt at 3,340 SFPM
- 7-1/4-inch by 3-3/4-inch cast aluminum disc table tilts 0-45 degrees
- Belt table tilts for chisel sharpening
- Solid steel base with rubber vibration feet and strong cast aluminum frame
There is a newer model of this item:
Customers Who Viewed This Item Also Viewed
From the Manufacturer
Top Customer Reviews
I was able to sharpen an old knife within 10 minutes of opening the box. I had also ordered 1000 & 1200 grit belts and a leather strop at the same time and this machine gave me a perfect light-duty sander and a knife sharpener in one. No problems encountered and it did everything it was supposed to do, right out of the box.
I hesitate to write reviews when I haven't used a product for long. Most people care about reliability (like me) So if I have issues I will update this review down the road.
The Rikon is nicely finished for a unit of this price. Yes, the belt platen was off 1/4" to the left, but took ten minutes to correct. The belt is not centered to the platen, it is centered to the rollars, which should align it with the platen. The opening in the belt sanding table is a little rough, but both tables align correctly and provide good support. There is plenty of power for the size of material appropriate for this size sander. The belt tracked correctly as received, however, I did try adjustment and it drifted right and left just fine and stayed where set.
I do have another more robust 1" belt bench sander that has much heavier cast iron tables with lots of adjustment options. It has all steel enclosures, the same horse power rating and a power take off for a flex shaft. A JET J-4002 1-Inch by 42-Inch Bench Belt and Disc Sander which sells for over $400.
Most Recent Customer Reviews
Great machine, easy to change belts, I love it and use it every day
Thanks, Bill S.
I make bowie knifes using this sander it works fine for me.time after timePublished 20 months ago by Don Hughes
For what you pay, it's a decent little unit. The disc is a bit close to the switch, and if you are using the belt and lose focus for a second when turning it off you'll be missing... Read morePublished on April 29, 2014 by kasls
Very good for small tasks. If serious sanding required the more powerful
unit is desired. Shipment was very fast and condition of product excellent.
A very good little sander!! I like the affordable price. easy to use. don't take up much room !!! thanks!!!!!Published on October 2, 2013 by Phyllis W.
It gets the job done... I use it for shaping the stummle on briar pipes and other hard woods.
The belt wore out pretty quick and the replacement I got from my local HW... Read more