SCYTHE Glide Stream 140mm x 25mm PWM Fan - 500-1300 RPM SY1425HB12M-P
We don't know when or if this item will be back in stock.
|Item Dimensions LxWxH||5.51 x 5.51 x 0.98 inches|
|Power Connector Type||4-Pin|
|Noise Level||37 dB|
About this item
- Make sure this fits by entering your model number.
- 140 mm x 140 mm x 25 mm
- Airflow up to 97.18 cfm
- Anti-vibration system
- Speed of 1300 RPM
- Sleeve bearing
Specifications for this item
|Ean||4571225050447 , 0894092004707|
|Global Trade Identification Number||04571225050447|
|Item Weight||4.8 ounces|
|Noise Level||37.0 decibels|
The Scythe GlideStream 140 PWM combines the proven "small hub & wide blade" design concept with neat, new ideas: Grooved fan blades contributing to even less air resistance, and mounting holes fitted with rubber inlays in order to minimize unpleasant vibration noise. Another unique characteristic are the 120 mm mounting holes resulting in high airflow while keeping the noise to a minimum.
- Is Discontinued By Manufacturer : No
- Product Dimensions : 5.51 x 5.51 x 0.98 inches; 4.83 Ounces
- Item model number : SY1425HB12M-P
- Date First Available : March 28, 2013
- Manufacturer : Scythe
- ASIN : B008PZ16T6
Best Sellers Rank:
#5,894 in Computer Case Fans
- Customer Reviews:
Top reviews from other countries
Anyway this fan is nice and quiet at low RPM and it's not annoyingly loud at full, the fans on my graphics card are louder than this when playing games so it just gets drowned out.
Couple of things worth noting (which I don't think are in the description) are that this is a 140mm fan with fan mounts for a 120mm fan. This was perfect for my purposes but it wont match the holes in your case for the 140s and in my particular case the 120 mounting areas wouldnt allow me to install the fan properly. This isn't an issue with the fan as such but I thought it worth mentioning. In case you plan to install it in a 120mm slot you should check your clearance around the screw holes.
Also when trying to use this with the Noctua I had some difficulty as the screw holes are actually rubber sections pushed into an open square area in each corner. This is actually shown in one of the product pictures but as one side of the rubber is raised above the plastic of the hole it meant I couldn't fit the shaped metal wiring that connects the fans to the heatsink. I had to cut the nibs off each corner piece in order to fit the wiring. This isn't a complete disaster as technically there are 8 of these rubber pieces (one for each corner and on both front and rear of the fan) meaning I could swap the rubber pieces around if I really needed to fit the fan to a case mount.
In terms of air shifted this is actually a pretty good performer. It seems to produce a nice gust at full RPM and didn't negatively impact performance of my cooler (I haven't actually checked whether there was any increase in cooling). The cable going from fan to socket is nice and long and feels pretty thick and durable.
All in all not bad considering at time of purchase this was the cheapest 140mm PWM fna available. You could find better, but it'll cost more and they likely won't have the low profile this fan
Peccato si cominci a non trovare più nemmeno questa da quel che vedo, Scythe ha la strana tendenza di far sparire le cose buone che fa.
Würde ich mir sofort nochmal holen wenn ich einen nötig hätte.
Habe extra die PWM Version genommen, da mein Mainboard 2 CPU Lüfter steuern kann.
Die Lüfterbohrungen sind als 120mm Lüfter ausgelegt, also kleiner als der Eientliche 140mm Lüfter.
Der Lüfter dreht in der "M" Version auf max. 1300 upm.
Dann ist dieser natürlich hörbar.
Ansonsten kühlen die beiden Lüfter meine CPU konstant bei nur etwa unhörbaren 500upm.
Ich bin begeistert, von daher immer wieder Scythe.