|Item Weight||52.2 pounds|
|Product Dimensions||21.8 x 15.2 x 9.8 inches|
|Item model number||3320-01|
|Item Package Quantity||1|
|Warranty Description||1 year warranty/30 day money back guarantee|
Other Sellers on Amazon
+ Free Shipping
+ Free Shipping
+ Free Shipping
4-Year Home Improvement Protection Planfrom SquareTrade
- Coverage for product breakdowns and malfunctions
- 24/7 customer support
- Free shipping on all repairs with no deductibles or hidden fees
- Fully transferable with gifts. Cancel anytime, full refund in the first 30 days
- If you purchase this service plan and eligible product for this service plan, you acknowledge that Amazon may send the service plan seller relevant product and price information for the purpose of administering the plan
SKIL 3320-01 3.2 Amp 10-Inch Drill Press
- Enter your model number to make sure this fits.
- 1/2-Inch keyed chuck. Bump-off switch for added safety
- 5 Speeds - 570 - 3,050 RPM
- Adjustable depth stop for accurate measurements and repetitive drilling
- 0-45 Degree Left/Right Tilting Work Surface
- Laser X2 2-beam laser for precise hole alignment
Frequently bought together
Customers who bought this item also bought
Customers who viewed this item also viewed
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
From the manufacturer
SKIL 3320-01 10-Inch Drill Press with Laser
For the weekend woodworker who wants greater precision than a handheld drill offers, the 3320 SKIL 10-inch Drill Press with Laser is a solid choice. The X2 2-Beam Laser helps ensure precise hole alignment, while the depth adjustment system lets you drill down consistently every time. Five speeds cut holes cleanly through wood, metal and other materials with the 3320 Drill Press, which accepts larger diameter bits for woodworking and cutting. The work surface tilts from zero to 45 degrees, another plus. And with a limited 3-year warranty, this is a drill press to count on for lots of larger-scale furniture and building projects.
(1) SKIL 3320 10-Inch Drill Press Motor Unit, (1) Cast Iron Base and Work Table, (2) AA Batteries, (1) Chuck Key
- Amperage: 3.2
- Rating: 120V
- No Load RPM: 5 Speed; 750-3,050
- Chuck Size: 1/2-Inch
- Drill on Center: 10-Inches
- Tilting Work Table: 0-45 Degrees
- Table Size: 7-5/8-Inches
- Certifications: cSAus
The X2 2-Beam Laser helps ensure precise hole alignment, while the depth adjustment system lets you drill down consistently every time.
Five speeds cut holes cleanly through wood, metal, and other materials with the Drill Press, which accepts larger diameter bits for woodworking and cutting.
0-45 Degree Left and Right Tilting Work Surface
To ensure precise angled drilling, the tilting work surface will lock between a zero and 45 degree angle.
1/2-Inch Keyed Chuck
The square work surface will help support larger pieces of material while the 1/2-inch keyed chuck accepts larger bits for woodworking and cutting.
Compare with similar items
Genesis GDP1005A 10" 5-Speed 4.1 Amp Drill Press with 5/8" Chuck, with Integrated work light and Table that Rotates and Tilts
RIKON 30-120 13-Inch Drill Press
Genesis GDP805P 8 In. 5-Speed 2.6 Amp Drill Press with 1/2 In. Chuck & Tilt Table,
|Shipping||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping|
|Sold By||Amazon.com||Amazon.com||CT Power Tools||Amazon.com|
SKIL 10 In. 5 Speed Drill
From the Manufacturer
Skil Benchtop Power Tools are Quality Tools at a Great Price !
Top customer reviews
There was a problem filtering reviews right now. Please try again later.
First, Amazon customer service. The drill press arrived to me with the column base broken. Actually, there's a problem with the way it's packaged, (see picture) not Amazon's fault and I don't really blame the shipper. However, since I'm on an island in the Caribbean it was quite difficult and expensive to return. Amazon offered a discount to keep the drill press if I could get it repaired here, which I did. Bravo to Amazon.
Now, the drill press. As a retired quality control manager for a very large tool company, I know tools. My initial impression "out of the box" was quite positive, table is nicely machined, painting is well done and general fit and finish is excellent . Assembly was straight forward and very easy. (Note here: I've spoken with many customers over the years who didn't clean the spindle and drill chuck before installing, some even applied oil, then couldn't keep the chuck on the spindle taper. It's very important the the spindle taper and the chuck taper be cleaned with a solvent. Any oil on either taper will result in the chuck not staying on.)
I chucked a piece of drill rod and set the table to "0" using a high quality machinist square. The zero indicator was off very slightly, not enough to affect most jobs. Then checked to see how well the drill rod was parallel to the drill column and was very surprised to discovery it was almost perfect. I have to say I'm impressed.
I checked the runout by placing a drill rod in the chuck, then took a measurement 100mm from the chuck. Indicated runout was 0.009" which is a little more than I'd like to see but not bad considering the cost of this unit. I then measured how much "slop" there was between the quill and the head casting. At zero extension it measured 0.006" and at full extension measured 0.012". That's actually pretty good and better than I've seen on some much more expensive drill presses.
There is no mechanism, such as a lever, to apply tension to the drive belt but that's not a problem, just loosen the two wing nuts and push on the motor to tension then tighten the wing nuts. The drive belt is typical low quality Chinese and is "shedding" inside the belt cover more than I would consider normal however, I don't see this ever becoming a real problem.
I do have some concern with the motor though as it gets quite hot after running for 15 minutes or so under very light load drilling 1/8" holes in pine.
I don't find the laser sight to be particularly useful though. The "X" where the two lights beams cross is rather wide plus in bright light it's very hard to see.
In the end I am quite pleased with this small drill press. It's accurate, well built and sturdy. It's hands down the nicest small drill press I've seen and I believe would please most all users.
1. Worst problem of all is the unreliable depth-stop feature. It is confusing and clumsy to set, and it sometimes GIVES WAY! The first time that happens and you drill through the show face of your work piece you will not be a happy camper!
2. The up/down range of the table can be limiting. Not evident at first, but when you start using longer bits and trying to drill deep holes in a tall object, you suddenly find yourself swinging the table out of the way and building a lower, makeshift table.
3. Runout (i.e. wobble) - if/when you try to do precision work, this unit starts to fall short; you need a table that is dead square to the bit (in 2 dimensions, mind you), and adjusting the table angle is clunky. I am not sure if the chuck/bit is exactly parallel to the post.
Tip: Get yourself a good vise to sit on the table (or on a wood table that you build). The torque from the bit is very strong, and tends to cause the workpiece to move to the left (esp. with Forstner type bits)
The Skil 3320 took a little longer to deliver than expected (2 weeks). The distributor (CPO) was out of stock and indicated the drill press would be shipped direct from the factory. The box was pretty beat-up on arrival, but no components were damaged as the molded Styrofoam packaging did its job.
Considering the low sale price for this drill press I’m delighted with the quality and features normally only found on more expensive units.
I found assembly was easy. I can’t comment on the instructions as I only referred to the assembly illustration.
I make the following assembly comments:
- Added washers to the bolts used to bolt the column to the base.
- Added a washer where the crank connects to the table.
- Cleaned the protective coating from all the components and applied the appropriate lubricant to some components.
- I would suggest one modification. The rack is not positively attached to the column and relies on the wedge engagement at the bottom and top to prevent movement. The slightest rotation of the table on the column causes the rack to skew at the top. I plan to add a set screw to the rack collar that can be keyed to the top of the rack. The friction of the wedge alone is not enough to prevent movement. By simply loosening the original rack collar set screw you will still be able move the rack around the column if needed to position the table off center. I dropped my rating to 4 stars only because of this anomaly.
- Finally we bolted the drill press to my bench with a couple ½ inch bolts.
- We mounted a 4 inch Drill Press Vise using T-Slot nuts on top and bolting from the bottom.
- We also applied paste wax to the drill press to protect it from rusting.
My first project using the Drill Press was to drill 5/8 diameter holes completely through 2 ½ inch thick Walnut. We used and extra-long shaft Fostner bit for the job. We set the spindle speed for the slowest speed (570 RPM). We knew we would have shut-down and reposition the table height drilling in two steps to complete each hole. The gear rack adjustment made this easy to accomplish. We did not experience any spindle stalling and found the small motor size adequate for the job. I saw other reviews that indicated the drill didn’t have enough power. I would guess either the drill bit was dull, their speed was set to high or they used poor drilling technique. With deep drilling a peck-drilling technique is required to allow for adequate chip removal.
The built in laser works and is adjustable according to the user guide. I found mine to be dead-on and adjustment was not needed.
Overall this small table top drill press is a great value and performs beyond my expectations.