The tattoo stencil machine (also known as a thermal copier) will cut the prep time in half by letting you work on the tattooing itself, instead of you hand-drawing the sketches and stencils before you apply them on the client’s skin.
- Made of plastic material, which is environmental, safe and durable for long term use.
- There are several buttons/ keys for different functions, you can choose the copy methods, deepness etc.
- Suitable for printing transfer printing paper, which provides fast printing speed, little noisy sound.
- This tattoo transfer machine is created specifically for the artist.
- Lightweight, simple, reliable copier that will make your life easier.
Notes!
But maybe not the ideal choice for complex shadow designs,Some ink spots might be smeared or blurry.
The scanning resolution width is 210 mm.
|
|
|
|
|
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|---|---|---|---|
|
1. Press the buckles at both ends and open the cover. |
2. Turn on the Power Switch of the transfer machine. Warm up the machine for a few minutes. |
3. The three indicator lights are on and it is in normal working condition. If not, please adjust the button. |
4. Prepare a A4 4-layers Tattoo Transfer paper and transfer pattern document. |
|
|
|
|
|
|---|---|---|---|
|
5. Take out the transfer paper and remove the protective sheet. |
6. Put the yellow bottom paper into the Transfer Paper Input Mouth as shown in the figure below. |
7. Insert the printed pattern document with your back facing us.The machine sucked the pattern paper |
8. Press the Copy button and wait for the transfer. Transfer paper can be hand-held to assist transfer. |
