- Item Weight: 1.1 pounds
- Shipping Weight: 1.4 pounds (View shipping rates and policies)
- Domestic Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
- International Shipping: This item can be shipped to select countries outside of the U.S. Learn More
- ASIN: B017SGCWYU
- Item model number: Metal-Bronze-1KG1.75
- Average Customer Review: 2 customer reviews
- Amazon Best Sellers Rank: Manufacturer’s warranty can be requested from customer service. Click here to make a request to customer service.
Other Sellers on Amazon
SainSmart Metal-Bronze-1KG1.75 Bronze Metal 1.75 mm Filament for 3D Printing, 0.5 kg/1.1 lb.
- Make sure this fits by entering your model number.
- 0.5 kg (approximately 1.10 lbs.) spool
- 1.75Mm filament diameter (dimensional accuracy +/- 0.05Mm)
- Recommended extrusion/nozzle temperature 190°c - 200°c (374°f - 392°f)
Specifications for this item
|Number of Items||1|
|Outside Diameter||1.75 millimeters|
|Shop 3D Filaments by AmazonBasics|
Frequently bought together
Customers also bought in related categories
Customers who viewed this item also viewed
SainSmart 3D Printer Filament SainSmart 3D Printer Filament provides quality ABS/ PLA/ PVA/ HIPS/ PETG/ TPU/ Wood/ Metal 3D filament with vibrant colors. It is professional to enable you to see your thoughts and concepts engineered into a real and rewarding reality. This filament is always round, with no oily residue, no air bubbles, and it comes loaded on a quality spool. The quality of the filament is of great quality, and no kinks or breaks. Best choice for perfect printing! Features: * Widely used in health care, education, toys, building, automobile, electronics, anime field, etc. * For common 3D printers such as RepRap, Flash Forge, Makarov, AFINIA, Sol doodle 2, PRINTRBOT LC, Maker Gear M2, UP! and more. Frequently Asked Questions 1) Filament not extruding properly? A: Check the type of filament you're working with and set the proper extruder temperature based on the filament type and heated build Platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer. 2) How do I store my filament? A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It's recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant. 3) Is your filament tangled? A: Check that the spool is spinning smoothly on the mount.
Would you like to tell us about a lower price?
Showing 1-2 of 2 reviews
There was a problem filtering reviews right now. Please try again later.
My feeder is designed for flexible filaments so it is perfectly aligned by me and yet this fillament still breaks about every 30mm, add to that the issue of it melts at around 150c-160c it turns to water at 170 and just runs out of the nozzle, it partially clogs which it could push itself through but any back pressure snaps the filament.
I turned off retraction, that didn't help.
fed it slower, didn't help.
it melts to low and is the most brittle filament I have ever seen.
I did polish up a section of a failed blob of a print and it polished up beautifully.
will I continue to buy Sainsmart? yes, will I buy the bronze again? no, I am so disappointed in it I was hoping to make xmas presents with it.