|Brand Name||Bel-Art Products|
|Item Weight||2.4 ounces|
|Product Dimensions||4 x 3.6 x 1.1 inches|
|Item model number||377861000|
|Number of Items||1|
|Manufacturer Part Number||377861000|
Other Sellers on Amazon
+ $6.07 shipping
Scienceware F377861000 PS Spinbar Magnetic Stir Bar Restrainer
|Price:||$18.97 & FREE Shipping on orders over $49. Details|
- Enter your model number to make sure this fits.
- Removes a magnetic stir bar from a container without touching the contents of the container
- Helps prevent splashing and contamination of contents when emptying containers in laboratory stirring applications
- Can be used with magnetic stir bars up to 3" (80 mm) long
- Made from PS, which provides resistance to chemicals and abrasion
- Can be operated with one hand
Customers Who Bought This Item Also Bought
From the Manufacturer
Additional Spinbar Retrievers / Strainers / Arresters
Spinbar Magnetic Retrievers (for containers)
Easily recover stirring bars from containers with Spinbar Magnetic Retrievers, F37772-0000, F37773-0000. A 9.5 millimeters (⅜-inch) diameter polyethylene pick-up rod with powerful Alnico magnet sealed in one end and a handy loop for hanging on the other.
Spinbar Flexible Magnetic Retrievers
Flexible, Teflon rod with a powerful Alnico Teflon coated magnet for retrieving magnetic stirring bars from containers or non-magnetic sink drains and traps, H37774-0000, H37774-0010, H37774-0020, H37774-0030, H37774-0101, H37774-0111, H37774-0121, H37774-0131. Available in four colors, two magnet sizes. Flexible white rod is 33cm (13-inch) long for both sizes. Autoclavable.
Jumbo Magnetic Spinbar Retriever
This flexible PTFE magnetic retriever, F37781-0000, will remove the largest magnetic stirring bars from deep vessels. Retriever has an easy grip 'T' handle with an overall length of 65cm (26-inch) including the powerful Alnico 5 magnetic end which is 10.2 x 1cm diameter (4 x ⅜-inch).
Magnetic Stirring Bar Retriever
This retriever, F37775-0000, is able to remove a magnetic stirring bar without coming into contact with the contents of the vessel. It eliminates contamination of contents and does not need to be cleaned or autoclaved after use. The magnet is located in the 25 x 70 millimeter (1 x 2¾-inch) rectangular section, and a long ribbed handle provides a secure grip. Made of high density polyethylene. Overall length: 20 centimeters (7.7-inch).
The Spinbar Restrainer, F377861-0000, fits ergonomically in one hand, and when placed alongside the outer wall of a mixing vessel it retains and secures the stirring bar in position. After the vessel is drained, the confined stirring bar is securely retrieved from the vacant container without contaminating the solution. It houses a strong magnet that restrains magnetic stirring bars up to 80 millimeters (3-inch) long.
Spinbar Magnetic Sink Strainers
Spinbar Magnetic Sink Strainers, F37787-0000, F37787-0001, are a simple solution to prevent your Spinbar Magnetic Stirring Bars from going down the sink drain. The flexible, chemical-resistant sink strainers have four strong magnets in each corner that attract and hold Spinbar Magnetic Stirring Bars, while the long slits in the sides and skirt allow fluids to drain rapidly. A wide skirt allows the Spinbar Magnetic Sink Strainer to be used in a variety of sink drains, and a straight edge on one side allows it to be placed near the sink wall. Four legs on the underside of the Spinbar Magnetic Sink Strainer anchor the strainer in the sink drain and prevent it from being dislodged by flowing liquid. Available in blue or green.
Magnetic Stirring Bar Arrester
The Magnetic Stirring Bar Arrester, F37786-0000, holds your stirring bar in place when pouring from a beaker or flask by placing the arrester against the bottom of the container. The arrester is 9.5 millimeters (⅜-inch) thick polyethylene, 51 millimeters (2-inch) diameter with a radial magnet.
Positioner / Retriever
Position your Spinbar Magnetic Stirring Bar exactly where you want it, without splashing, using the double duty Spinbar Positioner/Retriever, H37780-0000. You can also remove bars without touching or pouring out the contents of your vessel. To pick up a stirring bar, hold the polyethylene retriever down; to release a stirring bar, slide the retriever up inside the tube.
Top Customer Reviews
Update: I was able to open the magnet housing without much effort and hot glue the magnet in place inside the housing. I still believe this should be done by the manufacturer but at least there is a workaround for the flopping magnet if you DIY.