|Item Weight||9.8 pounds|
|Product Dimensions||17 x 4 x 17.8 inches|
|California residents||Click here for Proposition 65 warning|
|Item model number||1R0004N|
|Discontinued by manufacturer||Yes|
|Item Package Quantity||1|
|Warranty Description||One year warranty|
Senco 1R0004N DS200-AC Duraspin 3,300 RPM Collated Screwdriver
- Enter your model number to make sure this fits.
- Corded power for the demanding need of professional remodelers and contractors
- Drives 1-inch to 2-inch screws ,even-inch hard woods
- Each kit comes complete with tool, two spare drive bits, drywall and wood nose -pieces and rugged carrying case
- Trigger lock with reverse for continuous work
- Built-inch belt hook ,comfort grip, adjustable depth of drive for flush drive or countersink
Customers Who Viewed This Item Also Viewed
Corded, integrated, and easy to handle and hold, the DS200-AC includes all the helpful features of the DS200-14v, with the addition of higher speed and torque, and a trigger lock to enable continuous operation in high-speed applications. A powerful 3,300 RPM motor easily tackles projects like installing cement board or building a deck while allowing for one-handed screw fastening with either the right or left hand.
Consistent, High-Quality Results
Super-tough drive bits--currently the longest lasting available--offer consistency and high-quality results, while an adjustable depth-of-screw drive provides a flush drive or countersink. For added precision, easy-to-read markings on the adjustable nosepiece keep your project on-track. And with a capacity of 50 screws per strip, the DS200-AC lets you get more done in less time.
Comfortable, User-Friendly Design
Incredibly user-friendly, the DS200-AC is designed with long-term user comfort in mind, whether you're putting up a fence or installing underlayment or floor sheathing. A supportive grip minimizes wrist and arm fatigue by reducing the exertion needed to complete each drive, and a reverse switch backs out driven screws. There's also a built-in belt hook for portability and convenience. Measuring a compact 14.5 x 8 inches (WxH) and weighing 4.9 pounds, this lightweight tool comes with a carrying case for space-saving storage.
The DS200-AC is backed by a one-year warranty.
For over 50 years, Senco Products, Inc. has provided high-quality products to make it easier for both professionals and remodelers to complete a wide variety of renovation, construction, and industry work. Based in Cincinnati, Ohio, with distributors worldwide, Senco is one of the leading manufacturers of pneumatic and powered fastening systems, as well as the fasteners they drive. Their tools boast superior workmanship and are used in a variety of industries, including home construction and remodeling, cabinet and furniture assembly, manufactured housing and industrial packaging.
What's in the Box
1R0004N DS200-AC Duraspin 3,300 RPM Collated Screwdriver, two spare drive bits, drywall and wood nose pieces, and a rugged carrying case.
Top Customer Reviews
The good: (and it's mostly all good): Man does this gun lay the screws in fast. I pay a guy $25 / hour to help me and the money I spent on the gun and collated screws paid for itself in both time and aggravation. Zip - pop - bam, the screw is in and waiting for you to tell it where the next one goes. It made what would have been a miserable job fun. My gun came with a Philips bit and two square head bits. It is easily adjustable for depth and even has an adjustment so you can countersink the screws a bit. Very cool.
The bad: The only niggle I would have with this gun is the logistics. I tore the grooves off the end of the Philips bit that came with it in short order and then went on a merry tour to many local home improvement stores and then even a Senco dealer. None of them had bits ( or collated screws) to fit. I ended up placing an order back with Amazon to get the bit. I found that Milwaukee brand collated screws fit just as well. I ordered all these, round 2, from Amazon.
Bottom line: When you use this gun, be sure to plan in advance and get the screws and extra bits you might need from Amazon. Be sure to use the square headed screws and bits, the Philips bits don't last long.
Also speeds up the hanging process ten-fold. You can easily hang a 4X8 sheet in under a minute - I'd never come close to that with my old drywall screw gun.
I was looking at a new makita gun for $79, and for the extra $20 it was well worth having the autofeed.
I would recommend this tool to anyone doing decking, drywall, strapping, etc. work.
First, if you are only doing a sheet or two and have plenty of help, the Duraspin is overkill. If, however, you plan to do more than that -- or you are hanging rock by yourself, this gun is well worth the price. Anyone who has tried to hold sheetrock in place, fumble for a screw, get it on the gun and then get it in the wall will appreciate the Duraspin instantly. My assistants and I figured that it took our best man an average of about 15 minutes to set screws (about 50) with a manual screw gun in an 4x12 sheet. With the Duraspin the process takes less than 2 minutes.
Second, it takes a little time and practice to get the gun set up properly. We set 1 5/8" screws through 1/2" sheetrock, plaster and lath. Once set properly, we can set about 95% of screws to the proper depth on the first try. Of the remaining 5%, about half did not set due to operator error -- pressing too hard, not holding the gun straight, etc. For the 5% that you miss, you will need a manual screw gun or a drill to finish setting the screws. Still well worth the time.
Third, we found it necessary to lube the screw advance mechanism about twice a day. Dust and plastic residue seems to build up and can cause the slider that advances the screws to stick. When ours starts to stick we spray it with WD-40 and wipe of the residue, and it is good for about another half a day.Read more ›
Most Recent Customer Reviews
The trick with this tool is to lube the moving parts with a dry lube such as Tri-Flow. This tool saved me many hours during my drywall job. I found it to be essential. Read morePublished 16 months ago by Tired of Corporate greed
I love this drywall screw gun. I have owned this for a few years and don't know what I would do without it.Published 17 months ago by Craig Crandall
Got this screwgun to screw down 1100 sq/ft of sub-floor for new hardwood floor install. All I can say is wow this can put down a bunch of screws quick. Read morePublished 22 months ago by Charles
Have had this for some time now and have used it many times with absolutely no problems what so ever. Excellent product!!!Published 23 months ago by Philip M. Smith