| Manufacturer | Seymour Paint |
|---|---|
| Part Number | 620-1431 |
| Item Weight | 1.3 pounds |
| Product Dimensions | 2.5 x 2.5 x 9 inches |
| Item model number | 620-1431 |
| Size | 17 Ounce (Pack of 1) |
| Color | Light Gray Primer |
| Material | Solvent based |
| Item Package Quantity | 1 |
| Special Features | Rust-resistant |
| Batteries Required? | No |
SEYMOUR 620-1431 Industrial MRO High Solids Spray Paint, Light Gray Primer
| Paint Type | Oil, Spray |
| Brand | Seymour |
| Color | Light Gray Primer |
| Unit Count | 17.0 Ounce |
| Age Range (Description) | Adult |
| Special Feature | Rust-resistant |
| Size | 17 Ounce (Pack of 1) |
| Item Form | Aerosol |
About this item
- Make sure this fits by entering your model number.
- 3-4 times the coverage of standard aerosol spray paint
- Does not run or sag
- Protects against rust, weather, oil, gasoline and most corrosive chemicals
- Resists abrasion and heat
- Has single coat hiding
Customers who viewed this item also viewed
From the manufacturer
Product Description
Product Description
A rust proof industrial primer formulated specifically for use with MRO Industrial Protective Coatings. The most advanced high solids, VOC Compliant coating in the industry, 3-4 times the coverage of standard aerosol spray paint. A superior, lead-free industrial coating formulated for maintenance operations where maximum performance is required. Protects against rust, weather, oil, gasoline and most corrosive chemicals. MRO High Solids resists abrasion and heat, withstands high humidity, has single coat hiding and is USDA authorized. Heat resistant up to 300-Degree F. As a responsible corporate citizen, SEYMOUR of Sycamore is thoroughly committed to protecting the natural environment and ensuring the well-being of our employees. This means not only providing a safe, clean and healthy workplace, but also fulfilling our legal and social responsibilities within the community. SEYMOUR has developed coatings with waterborne and high-solids resins as an alternative to traditional solvent-based polymers. SEYMOUR products do not contain lead, cadmium, mercury, chromates or chlorinated solvents.
From the Manufacturer
A rust proof industrial primer formulated specifically for use with MRO Industrial Protective Coatings. The most advanced high solids, VOC Compliant coating in the industry, 3-4 times the coverage of standard aerosol spray paint. A superior, lead-free industrial coating formulated for maintenance operations where maximum performance is required. Protects against rust, weather, oil, gasoline and most corrosive chemicals. MRO High Solids resists abrasion and heat, withstands high humidity, has single coat hiding and is USDA authorized. Heat resistant up to 300-Degree F. As a responsible corporate citizen, Seymour of Sycamore is thoroughly committed to protecting the natural environment and ensuring the well-being of our employees. This means not only providing a safe, clean and healthy workplace, but also fulfilling our legal and social responsibilities within the community. Seymour has developed coatings with waterborne and high-solids resins as an alternative to traditional solvent-based polymers. Seymour products do not contain lead, cadmium, mercury, chromates or chlorinated solvents.
Product information
Technical Details
Additional Information
| ASIN | B000AYJ0HA |
|---|---|
| Customer Reviews |
4.5 out of 5 stars |
| Best Sellers Rank | #63,637 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #194 in Spray Paint |
| Date First Available | March 2, 2010 |
Feedback
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonReviewed in the United States on March 19, 2019
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
On this guitar, I primed the back, sanded, and prepped for paint. This paint builds very quickly, if you put too much on, it will never dry. It dries on the surface, but then seals, and never lets it completely cure. It will indent even after letting it dry for a couple of weeks. Very frustrating.
Make sure to use thin coats, allowing each coat to dry before applying the next. Can't stress this enough.
Because it is thick, once dried, you can color sand it to perfection! I sprayed gold glitter and then a clear over that, came out amazing.
By SCOTT SLOAN on February 17, 2022
On this guitar, I primed the back, sanded, and prepped for paint. This paint builds very quickly, if you put too much on, it will never dry. It dries on the surface, but then seals, and never lets it completely cure. It will indent even after letting it dry for a couple of weeks. Very frustrating.
Make sure to use thin coats, allowing each coat to dry before applying the next. Can't stress this enough.
Because it is thick, once dried, you can color sand it to perfection! I sprayed gold glitter and then a clear over that, came out amazing.
It has extremely good coverage, it hides everything, it's self-leveling, quick-drying, and the finish is smooth, non-reflective, and durable. It doesn't drip, pool, or run unless you put on a ridiculously thick coat.
It's a very forgiving paint; apply this correctly and you'll be happy every time. It dries as hard as rock, like a powder-coated finish. Super hard, super durable.
Here's the key to using this paint: plan on giving whatever you're painting one good, even coat. Other paints typically tell you to build up multiple thin coats, but don't use this stuff that way. One nice, thick, smooth coat with 100% coverage is what you're aiming for.
Shake the can well and keep shaking it as you paint.
Spray any little nooks and crannies first, give the rest a good solid coat, and then STOP. Put the can down. DON'T keep spraying and spraying and spraying- do your best to get *everything* covered on the first glorious layer.
If you can, immediately cover the object with a box or other shield to prevent dust from ruining the finish. Leave it for ~30 mins until it's no longer tacky.
You can go back and do touch-ups, but my suggestion is to let the original coat dry a little bit first , and then very gingerly hit any missed areas.
I use this for painting the inside/outside of PC cases and it's always done a super job. One coat really does it all.
I don't give many 5-star reviews but this is great stuff; highly recommended!
By Carrie Perez on February 8, 2022




















