![Spigen Magnetic Ultra Hybrid MagFit Designed for iPhone 15 Pro Max Case, [Anti-Yellowing] [Milita...](https://m.media-amazon.com/images/S/aplus-media-library-service-media/e74fd128-e096-4794-8dc6-66131a8e5a99.__AC_SR166,182___.jpg)
![Spigen Magnetic Ultra Hybrid S MagFit Designed for iPhone 15 Pro Max Case, [Anti-Yellowing] [Mili...](https://m.media-amazon.com/images/S/aplus-media-library-service-media/da587ee4-4dcf-479e-8268-88250f64c768.__AC_SR166,182___.jpg)
Let me start by saying I'm usually a no case kinda guy. I'm a firm believer that a cool looking phone should not be covered up. That said, I dropped my caseless S4 countless times over the 2 years I owned it that the metal on the bezel was completely chipped away. When I finally upgraded to the S6 Edge, I immediately knew I'd need a case. The phone itself is beautiful, but delicate and a bit slippery to hold. So I went on a search for a case that still showcases the aesthetic of the phone while affording me a better grip as well as protection for the inevitable occasional drop.
After looking at and reading reviews for just about every clear case on Amazon, I settled on this. Absolutely nailed it.
The case is a single piece, and is made of a sort of combination plastic/rubber material (i assume that's the 'hybrid' part). This material provides a nice tackiness that allows for solid grip security. It fairly easily fits onto the phone, just takes a little coaxing to get over the volume/power buttons, and can just as easily be removed. The fit is perfect, as it presses up solidly against all edges. All of the openings in the case line up perfectly with the various holes on the phone. The opening for the headphone input in particular is quite large would fit the largest of jacks. I've yet to drop it, but I can tell the case would handle an impact nicely. It seems to be especially padded at each corner.
The case has a 'lip' on the top and bottom that extends only slightly outside the face. This way, if the phone is placed upside-down on a flat surface, the face is raised from the surface, which is nice. It also covers the full back of the phone, with just an opening for the camera. There are also 4 small, subtle 'feet' on the back of the phone (one in each corner) which prevents the full flat surface of the back from touching whatever surface it's set down on. This will certainly help to prevent scratches on the back of the case in the long run. The case comes with a screen protector for the back, but I opted not to use it. For one, it isn't large enough to cover the entire back of the phone. Also, it really dulled the shine of the back of my Gold Platinum color selection. Without it, the phone really shines through nicely.
One further note about the back, the thickness of it extends out further than the camera, so no worries about the camera being in constant contact with the surface it's laid upon.
A couple minor issues: The cover at the power button can be a bit stiff (this isn't an issue at the volume buttons). Not much of a problem, though, since the phone can be woken up by the home button, and can be left to time out to turn off the screen.
Also, it seems to collect dust easily at the top and bottom lips. Again, I don't find this to be too big of a problem, and since the case is so easy to remove, I don't mind doing so to clean it every few days.
Overall, this case rules. Gives me everything I'm looking for: A better grip to an otherwise slippery phone and protection to its delicate and high-end design while still showing off the phone's beautiful aesthetic. These are all just initial impressions as I've just obtained the case, so I can't say how it will hold up over time, but after a few days I'm greatly pleased. Can't really imagine a better case!
From the manufacturer
About Us
At Spigen, we strive to push the boundaries of design and technology. Our products are crafted and articulated with a mindset on maintaining the highest quality standards for the ultimate mobile experience.
Ultra Hybrid Collection for Galaxy S6 edge
Hybrid Clarity and Protection
The Ultra Hybrid case showcases your phone in extreme clarity that’s composed of a flexible TPU bumper and a hard PC back. Corners are equipped with Air Cushion Technology for added edge protection, giving you the perfect solution to clear protection.
- Hard case + flexible bumper
- Clear case for minimal style
- TPU button covers
- Slim profile for minimal bulk
Key Features
|
|
|
|
|
|---|---|---|---|
Clear CaseClear PC back lets you showcase the original phone design. |
Hybrid BuildConstructed of a hard PC back and a flexible TPU bumper. |
Air Cushion TechnologyOffers drop protection in the corners for much needed security around the edges. |
TPU Button CoversButtons stay protected yet tactile with solid feedback. |
|
|
|
|
|
|---|---|---|---|---|
| Flex HD Screen Protector | AP12T Universal Car Mount | Tough Armor | Liquid Crystal | |
| Compatible Accessories & Cases | The precise cutouts of Spigen’s Flex HD film mimic the screen's shape for full coverage from edge to edge. | Using one-touch technology, easily drive hands-free with the best driving companion. | The perfect combination of a TPU shell with a hard polycarbonate backing that is as durable as it is protective. | Enjoy the thinnest, most lightweight case for the Galaxy S6 Edge. |
The Spigen Experience
|
|
|
|
|---|---|---|
|
|
|
|
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
2:03
Click to play video
Spigen for Samsung Galaxy S10 Plus Case (2019)
Merchant Video
Reviews with images
Great case with some minor flaws..
As a long time user of Spigen cases, I must say that they never cease to amaze me. This case is absolutely amazing. it fits the phone perfectly and adds a great amount of protection. Not to mention, it is just the right size to make the phone fit perfectly in the hand. As others have stated, the phone feels better with the case on than it does without it. The buttons are very tactile and responsive when pressing, although I have found it a little tough at times to feel if you are pressing in the right spot, especially with the power button, but I believe this will go away in time as I get used to the case. The window looks amazing on the back without the included screen protector. It does not press up against the phone and make odd impressions as I have seen other cases do. The slight lips in the corners of the case give the slightest clearance so the phone itself does not touch a table when it is set down.CONS: When holding the phone in your right hand with your pinky finger supporting it on the bottom, the cutout for the headphone port will feeling like it is cutting into your finger. The speaker cutout is cut small so there are two speaker holes that are covered. The plastic film that comes on the back inside and outside of the case are very difficult to get off. Spigen could add a little tab to help with removal. Aslo, I believe the camera sits flush with the case, but it is really hard to tell. When looking under the phone while it is set on a table, it seems as though the camera is touching the table, but again it is extremely hard to tell. I have tried to picture this as best as possible to so you can decide for yourself what you see. And lastly, I suspect the tpu bumper around this case will start to yellow over time as I have seen other cases do, as this case is already showing slight signs. And because I am using the clear case with the "pearl" colored phone (which has the slightest yellow-browning tint to it) the clear case reflects the color and under certain lighting will appear to have a yellowish tint itself. Small price to pay for the comfort and protection in my opinion, and majority of the time it is not even noticeable.OVERALL this is a great case that I would highly recommend for your galaxy s6 edge. Although, I will never understand why they stopped making these in black...
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on April 11, 2015
Reviewed in the United States on April 18, 2015
As a long time user of Spigen cases, I must say that they never cease to amaze me. This case is absolutely amazing. it fits the phone perfectly and adds a great amount of protection. Not to mention, it is just the right size to make the phone fit perfectly in the hand. As others have stated, the phone feels better with the case on than it does without it. The buttons are very tactile and responsive when pressing, although I have found it a little tough at times to feel if you are pressing in the right spot, especially with the power button, but I believe this will go away in time as I get used to the case. The window looks amazing on the back without the included screen protector. It does not press up against the phone and make odd impressions as I have seen other cases do. The slight lips in the corners of the case give the slightest clearance so the phone itself does not touch a table when it is set down.
CONS: When holding the phone in your right hand with your pinky finger supporting it on the bottom, the cutout for the headphone port will feeling like it is cutting into your finger. The speaker cutout is cut small so there are two speaker holes that are covered. The plastic film that comes on the back inside and outside of the case are very difficult to get off. Spigen could add a little tab to help with removal. Aslo, I believe the camera sits flush with the case, but it is really hard to tell. When looking under the phone while it is set on a table, it seems as though the camera is touching the table, but again it is extremely hard to tell. I have tried to picture this as best as possible to so you can decide for yourself what you see. And lastly, I suspect the tpu bumper around this case will start to yellow over time as I have seen other cases do, as this case is already showing slight signs. And because I am using the clear case with the "pearl" colored phone (which has the slightest yellow-browning tint to it) the clear case reflects the color and under certain lighting will appear to have a yellowish tint itself. Small price to pay for the comfort and protection in my opinion, and majority of the time it is not even noticeable.
OVERALL this is a great case that I would highly recommend for your galaxy s6 edge. Although, I will never understand why they stopped making these in black...
CONS: When holding the phone in your right hand with your pinky finger supporting it on the bottom, the cutout for the headphone port will feeling like it is cutting into your finger. The speaker cutout is cut small so there are two speaker holes that are covered. The plastic film that comes on the back inside and outside of the case are very difficult to get off. Spigen could add a little tab to help with removal. Aslo, I believe the camera sits flush with the case, but it is really hard to tell. When looking under the phone while it is set on a table, it seems as though the camera is touching the table, but again it is extremely hard to tell. I have tried to picture this as best as possible to so you can decide for yourself what you see. And lastly, I suspect the tpu bumper around this case will start to yellow over time as I have seen other cases do, as this case is already showing slight signs. And because I am using the clear case with the "pearl" colored phone (which has the slightest yellow-browning tint to it) the clear case reflects the color and under certain lighting will appear to have a yellowish tint itself. Small price to pay for the comfort and protection in my opinion, and majority of the time it is not even noticeable.
OVERALL this is a great case that I would highly recommend for your galaxy s6 edge. Although, I will never understand why they stopped making these in black...
Images in this review
Top reviews from other countries
Cornelius Wiens
Awesome case, made the S6 Edge far easier to hold and handle.
Reviewed in Canada on April 15, 2016