*Included: trampoline, padded support bar, bungee pull cords for arm exercises, electronic jump counter, exercise video, all hardware and tools necessary for assembly.
*Parts: Oval jump pad, 6 feet with rubber bottoms (including two with predrilled holes to attach support bar legs), 6 bolts to attach the feet (one bolt per foot), 1 hex wrench (to attach each bolt to each foot), 2 wide vertical support bar legs with 2 bolts going through (to attach to predrilled feet; accepts the narrower adjustable height leg bars), 2 narrow vertical support bar legs with curved end (inserts into wider support bar legs, allowing height adjustment; curves to meet the horizontal support bar), 1 padded horizontal support bar (curves to meet the legs), 4 curved washers + 4 locking washers + 4 acorn nuts + wrench (to attach support leg to predrilled trampoline feet), bungee cords (for arm exercises; slips over foot on each end of the trampoline), battery powered jump counter and arm to attach counter, exercise CD in protective case
*Pro • comes with the jump pad assembled, so needs only legs added.
• Support bar, bungee pull cords, and jump counter optional.
• jump pad very safe with no springs to pinch.
• comes with all hardware and tools needed for assembly. Using own wrench or pliers would be easiest and more comfortable, however.
• easy to assemble: 1) separate two legs that have predrilled holes and choose one of the long sides of the jump pad to insert them. 2) insert the other four legs, leaving two on each long side and one on each short side. You may choose to slide the two bungee pull cords onto the feet on each short side if desired, or place them later. If placing later, slip the rubber feet off of the trampoline foot on each narrow end of the trampoline, and slide the bungee pull cord on before reattaching rubber foot 3) over each foot, lift the edge of the trampoline pad covering to expose the area for screwing a single bolt into each of the six feet, using the included hex/allen wrench. 4-5) Assemble support bar, and attach support bar to trampoline. Choice a: Assemble support bar first, then bolt onto feet of trampoline. Choice b: Bolt each vertical support bar leg onto trampoline feet, then insert horizontal support bar between them. *Vertical legs have a welded nut to accomodate the height adjustment knobs, and face forward toward the trampoline pad. *The legs of the support bar bolt onto the trampoline feet with predrilled holes. *Attaching the vertical support legs to the trampoline: Leg has two bolts going through. a) Insert the bolts through the leg and through the predrilled holes of the feet, so that the leg stands beside the foot with a rounded separator between the two. b) add a curved, flat washer onto each bolt end that sticks out c) add a round ring locking washer next d) cap off with the acorn nut. May use included wrench but using own wrench or pliers would be more efficient and easier. *Assembling five pieces of support bar: a) insert end of padded horizontal bar into each curved vertical tube. Pinch in the springy buttons from the ends of the padded bar, and when inserted they pop out through the predrilled hole of the curved vertical tube. b) insert the vertical bottom of each curved tube into the wider mouth of each leg tube. c) Choose the height desired, and insert the height adjustment knob through the wider leg into the narrower leg.
• adjustment knobs work great to hang the handles of the bungee pull cords from, keeping them off the ground and reducing tripping hazard.
Con: • the knobs to adjust the support bar difficult to screw into place initially
• the knobs to adjust the support bar can only face forward, but would look better and would eliminate the possibility of a jumping child scraping against them if the predrilled holes allowed them to face backward on the backside of the bars
• rubber hose of the bungee pull cords will attract dust and hair
Additional information:
• comes in a very large box, which can be used nicely when building a fort, pup tent, roof of a play house, or as a painting or drawing surface before discarding.
• people closer to 6' tall should not try to jump as high as they can if under an 8' ceiling.
• not as long as a toddler bed, but almost. Can easily double as a toddler bed by adding a cut down mattress pad, then using a toddler sheet to cover. Pad can be stored beneath the trampoline during the day. If worried about rolling off, it is not far above the ground but if desired a bumper or net can be attached to the support bars. Bed idea can be extended by placing a crate or wooden box beside it to extend length, and having a mattress pad cover both the trampoline and the crate so that the pillow is on the trampoline and the feet on the crate or box. We do this and it works great!
• though made for one person, a child can jump safely with an adult or with another child if holding onto the support bar.
• if worried about strangulation hazard for younger children, do not attach bungee pull cords.
| Color | 36-Silver |
|---|---|
| Brand | Stamina |
| Material | Steel Frame |
| Frame Size | 36 Inches |
| Pad Type | Safety Pad |
| Shape | Round |
| Product Dimensions | 36"L x 36"W x 8.75"H |
| Frame Material | Carbon Steel |
| Item Weight | 0.14 Pounds |
| Maximum Weight Recommendation | 25000 Hundredths Pounds |
| Item Package Dimensions L x W x H | 28.5 x 13 x 4.4 inches |
| Package Weight | 4.88 Kilograms |
| Item Dimensions LxWxH | 36 x 36 x 8.75 inches |
| Brand Name | Stamina |
| Country of Origin | China |
| Warranty Description | 90 days parts/1 year frame |
| Model Name | Mini Fitness Trampoline w/ Smart Workout App |
| Suggested Users | unisex-adult |
| Number of Items | 1 |
| Manufacturer | Stamina Products, Inc. |
| Part Number | 35-1625 |
| Style | Round |
| Included Components | 36" Foldable Mini Trampoline w/ Smart Workout App |
| Size | One Size |
| Sport Type | Excercise & Fitness |
